Additive manufacturing technology and its benefits have a significant impact on different industrial applications. The 3D printing technologies help manufacture lightweight intricate geometrical designs with enhanced strengths. The present study investigates the blended effects of previously recommended parameters of different infill patterns (line, triangle, and concentric) and infill densities (75, 80, and 85%) with varying thicknesses of layers (100, 200, and 300 μm). The test samples were created through Fused Filament Fabrication (FFF) technology using Acrylonitrile Butadiene Styrene (ABS) 3D printing. Mechanical properties were evaluated through tensile and impact strength tests conducted in accordance with ASTM standards. The experimental investigation reveals that the infill pattern greatly affected both tensile and impact strength. The best results were obtained with a concentric infill pattern, along with 80% infill density and 100 μm layer thickness. These conditions resulted in 123% and 115% higher tensile strength and 168% and 80% higher impact strength compared to line and triangle patterns, respectively.

In recent times, demand for light weight and high strength materials fabricated from natural fibres has increased tremendously. The use of natural fibres has rapidly increased due to their high availability, low density, and renewable capability over synthetic fibre. Natural leaf fibres are easy to extract from the plant (retting process is easy), which offers high stiffness, less energy consumption, less health risk, environment friendly, and better insulation property than the synthetic fibre-based composite. Natural leaf fibre composites have low machining wear with low cost and excellent performance in engineering applications, and hence established as superior reinforcing materials compared to other plant fibres. In this review, the physical and mechanical properties of different natural leaf fibre-based composites are addressed. The influences of fibre loading and fibre length on mechanical properties are discussed for different matrices-based composite materials. The surface modifications of natural fibre also play a crucial role in improving physical and mechanical properties regarding composite materials due to improved fibre/matrix adhesion. Additionally, the present review also deals with the effect of silane-treated leaf fibre-reinforced thermoset composite, which play an important role in enhancing the mechanical and physical properties of the composites.

The increasing global dependence on fossil fuels for energy has prompted researchers to explore alternative power generation sources that offer higher efficiency, cost‐effectiveness, and low environmental impact. Developed countries have been making continuous efforts to reduce their reliance on depleting fossil fuel sources to curb carbon emissions. As a result, hydrogen has gained significant attention among researchers as a potential future fuel that meets all the necessary criteria. Many countries aiming for a hydrogen economy have invested in research on fuel cells. Among various fuel cells, the solid oxide fuel cell (SOFC) has emerged as a commercially viable power source at a small scale. This paper provides an extensive review of the components, materials, design, operation, and integration strategies of SOFCs with existing thermal‐based power plants. The performance and prospects of various SOFCs in standalone and hybrid modes are summarized, along with the limitations. Additionally, the research and commercialization efforts that can enhance the potential applications of SOFCs as a sustainable and reliable system in the long term are outlined.

In this study, experiments are performed to study the physical and mechanical behaviour of chemically-treated sugarcane bagasse fibre-reinforced epoxy composite. The effect of alkali treatment, fibre varieties, and fibre lengths on physical and mechanical properties of the composites is studied. To study the morphology of the fractured composites, scanning electron microscopy is performed over fractured composite surfaces. The study found that the variety and lengths of fibres significantly influence the physical and mechanical properties of the sugarcane bagasse-reinforced composites. From the wear study, it is found that the composite fabricated from smaller fibre lengths show low wear. The chemically-treated bagasse-reinforced composites fabricated in this study show good physical and mechanical properties and are, therefore, proposed for use in applications in place of conventional natural fibres.

In this investigation, the extensive wear behaviour of materials was studied using SiC reinforced magnesium alloy composites fabricated through the stir casting process. The wear properties of AZ91 alloy composites with a small variation (i.e., 3%, 6%, 9% and 12%) of SiC particulates were evaluated by varying the normal load with sliding velocity and sliding distance. The worn surfaces were examined by scanning electron microscope to predict the different wear mechanisms on the pin while sliding on the hard disk in the dry sliding wear test condition. The microhardness of the SiC reinforced AZ91 composites was found to be more than the un-reinforced AZ91 alloy. Pins tested at load 19.62 N, and 2.6 m/s exhibited a series of short cracks nearly perpendicular to the sliding direction. At higher speed and load, the oxidation and delamination were observed to be fully converted into adhesion wear. Abrasion, oxidation, and delamination wear mechanisms were generally dominant in lower sliding velocity and lower load region, while adhesion and thermal softening/melting were dominant in higher sliding velocity and loads. The wear rate and coefficient of friction of the SiC reinforced composites were lower than that of the unreinforced alloy. This is due to the fact of higher hardness exhibited by the composites. The wear behaviour at the velocity of 1.39 m/s was dominated by oxidation and delamination wear, whereas at the velocity of 2.6 m/s the wear behaviour was dominated by abrasion and adhesion wear. It was also found that the plastic deformation and smearing occurred at higher load and sliding velocity.

The present study proposes variety ofnovel composites fabricated from Rambans (Agave) fibers and recognizes its physical and mechanical behavior by varying its proportion in the fiber-reinforced polyester resin composite. The physical and mechanical properties of composites are determined . The mechanical properties (hardness, tensile, flexural and impact-resistant) and the scanning electron microscopy for fractured surfaces were analyzed to further characterize the composite surfaces. The maximum tensile strength of the composite is found to be 95.27 MPa with 4.7 Jm⁻² impact strength. It is concluded that the above composite composition leads to better mechanical properties, which can be used in many applications in place of conventional natural fibers.