Industrialization and population growth have significantly increased the demand for lightweight, high-strength materials for construction and automotive applications, ultimately increasing the demand for eco-friendly materials. Due to its environmental acceptability, technological feasibility, and economic viability, natural fiber-reinforced composite exhibits many potential engineering applications. However, the production and recycling of natural fibers are expensive. Researchers are now comparing natural fiber-reinforced composites with synthetic composites to determine the best materials, especially for construction and automotive engineering applications. This review paper focuses on natural fiber reinforced epoxy composites’ physical, mechanical, and thermal characteristics. These properties are critical for the effective design and use of composite materials such as construction and automotive applications. This review begins with a background of epoxy and natural fibers. The physical and chemical treatment for natural fiber composites to improve their properties is also briefly discussed, along with the critical factors affecting the physical, mechanical, and thermal properties of natural fiber-reinforced composites. Finally, concluding remarks and suggestions for future works are given.
In this study, experiments are performed to study the physical and mechanical behaviour of chemically-treated sugarcane bagasse fibre-reinforced epoxy composite. The effect of alkali treatment, fibre varieties, and fibre lengths on physical and mechanical properties of the composites is studied. To study the morphology of the fractured composites, scanning electron microscopy is performed over fractured composite surfaces. The study found that the variety and lengths of fibres significantly influence the physical and mechanical properties of the sugarcane bagasse-reinforced composites. From the wear study, it is found that the composite fabricated from smaller fibre lengths show low wear. The chemically-treated bagasse-reinforced composites fabricated in this study show good physical and mechanical properties and are, therefore, proposed for use in applications in place of conventional natural fibres.
The present study proposes different types of composites using natural fibers and recognizes its physical and mechanical behavior by varying their proportion and also the hybrid composite of (hemp + nettle) fiber-reinforced polyester resin. Their physical properties are determined using morphological analysis. Mechanical properties (hardness, tensile, flexural, and impact-resistance) and the scanning electron microscopy for fractured surfaces were analyzed to test composite surfaces. It is concluded that the above composite composition leads to high mechanical properties, which can be proposed to be used in many applications in place of conventional natural fibers.
1 October 2021 in Journal of Water Process Engineering
The present study proposes variety ofnovel composites fabricated from Rambans (Agave) fibers and recognizes its physical and mechanical behavior by varying its proportion in the fiber-reinforced polyester resin composite. The physical and mechanical properties of composites are determined . The mechanical properties (hardness, tensile, flexural and impact-resistant) and the scanning electron microscopy for fractured surfaces were analyzed to further characterize the composite surfaces. The maximum tensile strength of the composite is found to be 95.27 MPa with 4.7 Jm−2 impact strength. It is concluded that the above composite composition leads to better mechanical properties, which can be used in many applications in place of conventional natural fibers.