Integral imaging (II) display, one of the most critical true-3D display technologies, has received increasing research recently. Significantly, an achromatic metalens array has realized a broadband metalens-array-based II (meta-II). However, the past micro-scale metalens arrays were incompatible with commercial micro-displays; furthermore, the elemental image array (EIA) rendering is always slow. The two hinders in device and algorithm prevent meta-II from being used for practical video-rate near-eye displays (NEDs). This research demonstrates a meta-II NED combining a commercial micro-display and a metalens array. The large-area nanoimprint technology fabricates the metalens array, and a novel real-time rendering algorithm is proposed to generate the EIA. The hardware and software efforts solve the bottlenecks of video-rate meta-II displays. We also build a see-through prototype based on our meta-II NED, demonstrating the feasibility of augmented reality. Our work explores the potential of video-rate meta-II displays, which we expect can be valuable for future virtual and augmented reality.

Low optical efficiency of light-emitting diode (LED) based headlamp is one of the most important issues to obstruct applications of LEDs in headlamp. An effective high-efficient LED headlamp freeform lens design method is introduced in this paper. A low-beam lens and a high-beam lens for LED headlamp are designed according to this method. Monte Carlo ray tracing simulation results demonstrate that the LED headlamp with these two lenses can fully comply with the ECE regulation without any other lens or reflector. Moreover, optical efficiencies of both these two lenses are more than 88% in theory.

The integration of micro-electro-mechanical system (MEMS) with metamaterial has provided a novel route to achieve programmability via its reconfigurable capabilities. Here, we propose and demonstrate a MEMS-based metadevice by using switchable winding-shaped cantilever metamaterial (WCM) for active logical modulation. WCM can be actuated by external driving voltage, and the logical modulation bit is performed by releasing MEMS cantilevers to represent “on” and “off” states. While the underneath substrate surface of a MEMS-based metadevice is rough after releasing the cantilevers, the metadevice is allowed to operate on the reconfigurable switching state and avoid the snapping down of the device when the system is overloaded. Such a reconfigurable and programmable MEMS-based metadevice exhibits multifunctional characteristics to simultaneously perform the logic operations of “OR” and “AND” gates. By exploiting the tuning mechanism of the MEMS-based metadevice, the arbitrary metamaterial configuration can be implanted into WCM. This opens a wide avenue to further enlarge the operating frequency range and applications in optoelectronic fields. These unique results provide various possibilities in multifunctional switching, active logical modulating, and optical computing applications.

A conformal phosphor coating can realize a phosphor layer with uniform thickness, which could enhance the angular color uniformity (ACU) of light-emitting diode (LED) packaging. In this study, a novel freeform lens was designed for simultaneous realization of LED uniform illumination and conformal phosphor coating. The detailed algorithm of the design method, which involves an extended light source and double refractions, was presented. The packaging configuration of the LED modules and the modeling of the light-conversion process were also presented. Monte Carlo ray-tracing simulations were conducted to validate the design method by comparisons with a conventional freeform lens. It is demonstrated that for the LED module with the present freeform lens, the illumination uniformity and ACU was 0.89 and 0.9283, respectively. The present freeform lens can realize equivalent illumination uniformity, but the angular color uniformity can be enhanced by 282.3% when compared with the conventional freeform lens.

In this research, the condition for uniform lighting generated by array of LEDs with large view angle was studied. The luminous intensity distribution of LED is not monotone decreasing with view angle. A LED with freeform lens was designed as an example for analysis. In a system based on LEDs designed in house with a thickness of 20mm and rectangular arrangement, the condition for uniform lighting was derived and the analytical results demonstrated that the uniformity was not decreasing monotonously with the increasing of LED-to-LED spacing. The illuminance uniformities were calculated with Monte Carlo ray tracing simulations and the uniformity was found to increase with the increasing of certain LED-to-LED spacings anomalously. Another type of large view angle LED and different arrangements were discussed in addition. Both analysis and simulation results showed that the method is available for LED array lighting system design on the basis of large view angle LED..