In recent years, there has been an increased interest in products of natural origin. The extraction procedure of bioactive compounds from plant matrices is a crucial step in the development of useful new bioproducts for everyday life. The utilisation of analyses enabling the rapid identification of the presence of a given group of compounds can be helpful in the early stages of the development of new products in order to save time and reduce costs. Within this article, we have presented a comparison of different, accessible methods for the identification of various bioactive compounds, e.g., saponins, carboxylic acids, oils and fats, proteins and amino acids, steroids, and alkaloids in plant-based extracts. Additionally, the multielemental composition of extracts was also examined. The applied methods allowed for confirmation of the presence of biologically active compounds in bio-products obtained by ultrasound-assisted extraction. At a later stage, these procedures should be supplemented by advanced analytical techniques in order to determine the plant chemicals’ content qualitatively and quantitatively.
A simplified approach for rare earth elements leaching from NdFeB (neodymium-iron-boron) magnets was investigated. The possibility of simplifying the magnet recycling process by excluding grinding, milling and oxidative roasting unit operations was studied. Attempts to skip the demagnetization step were also conducted by using whole, non-demagnetized magnets in the leaching process. The presented experiments were conducted to optimize the operating conditions with respect to the leaching agent and its concentration, leaching time, leaching temperature and the form of the feed material. The use of hydrochloric and sulfuric acids as the leaching agents allowed selective leaching of NdFeB magnets to be achieved while leaving nickel, which is covering the magnets, in a solid state. The application of higher leaching temperatures (40 and 60 °C for sulfuric acid and 40 °C for hydrochloric acid) allowed us to shorten the leaching times. When using broken demagnetized magnets as the feed material, the resulting rare earth ion concentrations in the obtained solutions were significantly higher compared to using whole, non-demagnetized magnets.
The aim of this study was to propose a complete approach for macroalgae biomass valorization into products useful for sustainable agriculture and environmental protection. In the first stage, the effects of macroalgal extracts and ZnO NPs (zinc oxide nanoparticles) on the germination and growth of radish were examined. Macroalgal extract was produced from freshwater macroalga, i.e., Cladophora glomerata by ultrasound assisted extraction (UAE). The extract was used to biosynthesize zinc oxide nanoparticles. In germination tests, extracts and solutions of ZnO NPs were applied on paper substrate before sowing. In the second stage, sorption properties of macroalga, post-extraction residue, and ZnO NPs to absorb Cr(III) ions were examined. In the germination tests, the highest values of hypocotyl length (the edible part of radish), i.e., 3.3 and 2.6 cm were obtained for 60 and 80% extract (among the tested concentrations 20, 40, 60, 80, and 100%) and 10 and 50 mg/L NPs, respectively. The highest sorption capacity of Cr(III) ions (344.8 mg/g) was obtained by both macroalga and post-extraction residue at a pH of 5 and initial Cr(III) ions concentration of 200 mg/L. This study proves that macroalgae and products based on them can be applied in both sustainable agriculture and wastewater treatment.
1 July 2020 in Journal of Trace Elements in Medicine and Biology