An ejector is a simple mechanical device that can be integrated with power generation or the refrigeration cycle to enhance their performance. Owing to the complex flow behavior in the ejector, the performance prediction of the ejector is done by numerical simulations. However, to evaluate the performance of an ejector integrated power cycle or refrigeration cycle, the need for simpler and more reliable thermodynamic models to estimate the performance of the ejector persists. This research, therefore, aims at developing a single mathematical correlation that can predict the ejector performance with reasonable accuracy. The proposed correlation relates the entrainment ratio and the pressure rise across the ejector to the area ratio and the mass flow rate of the primary flow. R141b is selected as the ejector refrigerant, and the results obtained through the proposed correlation are validated through numerical solutions. The comparison between the analytical and numerical with experimental results provided an error of less than 8.4% and 4.29%, respectively.

Reports by the US Department of Energy in 2014 evaluated membrane heat pump technology as one of the most promising alternatives to conventional vapour compression methods. Vapour compression methods maintain an evaporator temperature lower than the dew point to deal with the latent heat load. In membrane heat pump systems, only the water vapour is transferred and there is no phase change. The migration is caused by the difference in vapour pressure before and after the membrane. A vacuum pump or blower is used to create the pressure difference. However, there is no methodology for predicting dehumidification performance of membranes when used as part of a cooling system. In this study, using the assumption that there is a similarity between heat transfer and moisture pervaporation, the performance indices of the membrane are derived using a well-known heat exchanger method, the ε-NTU models. Performance estimations are calculated for two representative system layouts: bypass and vacuum. Simple relations between design parameters are suggested, giving design guidelines for researchers.