We present angle-resolved photoemission spectroscopy measurements of the surface states on in-situ grown (111) oriented films of PbSnSe, a three-dimensional topological crystalline insulator. We observe surface states with Dirac-like dispersion at and in the surface Brillouin zone, supporting recent theoretical predictions for this family of materials. We study the parallel dispersion isotropy and Dirac-point binding energy of the surface states, and perform tight-binding calculations to support our findings. The relative simplicity of the growth technique is encouraging, and suggests a clear path for future investigations into the role of strain, vicinality, and alternative surface orientations in (Pb,Sn)Se solid solutions.
1 December 2012 in Sensors and Actuators B: Chemical
An arrangement of self-assembled GaN nanowires (NWs) grown by plasma-assisted molecular beam epitaxy on a Si(111) substrate is studied as a function of the temperature at which the substrate is nitridized before GaN growth. We show that the NWs grow with the c-axis perpendicular to the substrate surface independently of nitridation temperature with only a slight improvement in tilt coherency for high nitridation temperatures. A much larger influence of the substrate nitridation process on the in-plane arrangement of NWs is found. For high (850 °C) and medium (450 °C) nitridation temperatures angular twist distributions are relatively narrow and NWs are epitaxially aligned to the substrate in the same way as commonly observed in GaN on Si(111) planar layers with an AlN buffer. However, if the substrate is nitridized at low temperature (~150 °C) the epitaxial relationship with the substrate is lost and an almost random in-plane orientation of GaN NWs is observed. These results are correlated with a microstructure of silicon nitride film created on the substrate as the result of the nitridation procedure.
1 December 2013 in Sensors and Actuators B: Chemical
This study describes a new method of passivating ZnO nanofiber-based devices with a ZnS layer. This one-step process was carried out in H2S gas at room temperature, and resulted in the formation of core/shell ZnO/ZnS nanofibers. This study presents the structural, optical and electrical properties of ZnO/ZnS nanofibers formed by a 2 nm ZnS sphalerite crystal shell covering a 5 nm ZnO wurtzite crystal core. The passivation process prevented free carriers from capture by oxygen molecules and significantly reduced the impact of O2 on nanostructure conductivity. The conductivity of the nanofibers was increased by three orders of magnitude after the sulfidation, the photoresponse time was reduced from 1500 s to 30 s, and the cathodoluminescence intensity increased with the sulfidation time thanks to the removal of ZnO surface defects by passivation. The ZnO/ZnS nanofibers were stable in water for over 30 days, and in phosphate buffers of acidic, neutral and alkaline pH for over 3 days. The by-products of the passivation process did not affect the conductivity of the devices. The potential of ZnO/ZnS nanofibers for protein biosensing is demonstrated using biotin and streptavidin as a model system. The presented ZnS shell preparation method can facilitate the construction of future sensors and protects the ZnO surface from dissolving in a biological environment.