Long-range wireless connectivity technologies for sensors and actuators open the door for a variety of new Internet of Things (IoT) applications. These technologies can be deployed to establish new monitoring capabilities and enhance efficiency of services in a rich diversity of domains. Low energy consumption is essential to enable battery-powered IoT nodes with a long autonomy. This paper explains the challenges posed by combining low-power and long-range connectivity. An energy breakdown demonstrates the dominance of transmit and sleep energy. The principles for achieving both low-power and wide-area are outlined, and the landscape of available networking technologies that are suited to connect remote IoT nodes is sketched. The typical anatomy of such a node is presented, and the subsystems are zoomed into. The art of designing remote IoT devices requires an application-oriented approach, where a meticulous design and smart operation are essential to grant a long battery life. In particular we demonstrate the importance of strategies such as “think before you talk” and “race to sleep”. As maintenance of IoT nodes is often cumbersome due to being deployed at hard to reach places, extending the battery life of these devices is critical. Moreover, the environmental impact of batteries further demonstrates the need for a longer battery life in order to reduce the number of batteries used.

Wireless power transfer provides a most convenient solution to charge devices remotely and without contacts. R&D has advanced the capabilities, variety, and maturity of solutions greatly in recent years. This survey provides a comprehensive overview of the state of the art on different technological concepts, including electromagnetic coupled and uncoupled systems and acoustic technologies. Solutions to transfer mW to MW of power, over distances ranging from millimeters to kilometers, and exploiting wave concepts from kHz to THz, are covered. It is an attractive charging option for many existing applications and moreover opens new opportunities. Various technologies are proposed to provide wireless power to these devices. The main challenges reside in the efficiency and range of the transfer. We highlight innovation in beamforming and UV-assisted approaches. Of particular interest for designers is the discussion of implementation and operational aspects, standards, and safety relating to regulations. A high-level catalog of potential applications maps these to adequate technological options for wireless power transfer.

We present a motion sensor node to support physiotherapy, based on an Inertial Measurement Unit (IMU). The node has wireless interfaces for both data exchange and charging, and is built based on commodity components. It hence provides an affordable solution with a low threshold to technology adoption. We share the hardware design and explain the calibration and validation procedures. The sensor node has an autonomy of 28 h in operation and a standby time of 8 months. On-device sensor fusion yields static results of on average $3.28$° with a drift of 2° per half hour. The final prototype weighs 38 g and measures ø6 cm × $1.5$ cm. The resulting motion sensor node presents an easy to use device for both live monitoring of movements as well as interpreting the data afterward. It opens opportunities to support and follow up treatment in medical cabinets as well as remotely.

Internet of Things (IoT) nodes get deployed for a variety of applications and often need to operate on batteries. This restricts their autonomy and/or can have a major ecological impact. The core idea of this paper is to use a unmanned aerial vehicle (UAV) to provide energy to IoT nodes, and hence prolong their autonomy. In particular, the objective is to perform a comparison of the total energy consumption resulting from UAV-based recharging or battery replacement versus full provisioning at install time or remote RF-based wireless power transfer. To that end, an energy consumption model for a small license-free UAV is derived, and expressions for system efficiencies are formulated. An exploration of design and deployment parameters is performed. Our assessment shows that UAV-based servicing of IoT nodes is by far more beneficial in terms of energy efficiency when nodes at distances further than a few meters are serviced, with the gap increasing to orders of magnitude with the distance. Our numerical results also show that battery swapping from an energy perspective outperforms recharging in the field, as the latter increases hovering time and the energy consumption related to that considerably. The ecological aspects of the proposed methods are further evaluated, e.g., considering toxic materials and e-waste.

Internet of Things technology is named as a key ingredient in the evolution towards digitization of many applications and services. A deployment based on battery-powered remote Internet of Things (IoT) devices enables easy installation and operation, yet the autonomy of these devices poses a crucial challenge. A too short lifespan is undesirable from a functional, economical, and ecological point of view. This paper presents a unmanned aerial vehicle (UAV)-based approach to recharge remote Internet of Things (IoT) nodes. An in-depth study of the charging efficiency and optimization of key parameters, and measurements-based verification, is reported on. An actual corresponding design and implementation of the full UAV-based charging system and its proof-of-concept validation are presented. Finally, the sustainability of the proposed solution is discussed. The results presented in this paper hence confirm that the proposed UAV-based approach and design are functionally successful and efficient charging can be achieved, provided the constraints and challenges coming with the approach are adequately dealt with. Moreover, it comes with an overall reduction in ecological footprint for IoT applications relying on battery-powered nodes in need of medium energy and/or considerable lifetime expectation (5 years or more).

The treatment of Musculoskeletal Disorders requires physical exercises to be executed regularly and correctly. This paper presents a technological solution to support this therapy consisting of on-body sensors and a supporting platform that captures and forwards the data automatically. We implemented wireless communication and charging in the sensor module. The wireless functionality enhances patient's comfort during movements and allows for easy and hygienic maintenance. Validation in a real-life case has demonstrated the suitability of the solution to monitor treatment remotely. Furthermore, it was shown to be easy-to-use by non-technical experts. The sensor has an autonomy of 20 hours, which contributes to its user friendliness. We explain and share the designs that have been realized with low cost IoT technologies including Micro-Electro-Mechanical System sensors, low power wireless connectivity and microcontrollers. The contactless multi-sensor solution can be broadly adopted both in medical cabinets and for remote treatment. The latter is of specific interest when the patient is far from the therapist, encounters mobility problems, or when safe distancing is needed.