Monitoring and managing water quality parameters (WQPs) in water bodies (e.g., lakes) on a large scale using sampling-point techniques is tedious, laborious, and not highly representative. Hyperspectral and data-driven technology have provided a potentially valuable tool for the precise measurement of WQPs. Therefore, the objective of this work was to integrate WQPs, derived spectral reflectance indices (published spectral reflectance indices (PSRIs)), newly two-band spectral reflectance indices (NSRIs-2b) and newly three-band spectral indices (NSRIs-3b), and artificial neural networks (ANNs) for estimating WQPs in Lake Qaroun. Shipboard cruises were conducted to collect surface water samples at 16 different sites throughout Lake Qaroun throughout a two-year study (2018 and 2019). Different WQPs, such as total nitrogen (TN), ammonium (NH₄⁺), orthophosphate (PO₄³⁻), and chemical oxygen demand (COD), were evaluated for aquatic use. The results showed that the highest determination coefficients were recorded with the NSRIs-3b, followed by the NSRIs-2b, and then followed by the PSRIs, which produced lower R² with all tested WQPs. The majority of NSRIs-3bs demonstrated strong significant relationships with three WQPs (TN, NH₄⁺, and PO₄³⁻) with (R² = 0.70 to 0.77), and a moderate relationship with COD (R² = 0.52 to 0.64). The SRIs integrated with ANNs would be an efficient tool for estimating the investigated four WQPs in both calibration and validation datasets with acceptable accuracy. For examples, the five features of the SRIs involved in this model are of great significance for predicting TN. Its outputs showed high R² values of 0.92 and 0.84 for calibration and validation, respectively. The ANN-PO₄³⁻VI-17 was the highest accuracy model for predicting PO₄³⁻ with R² = 0.98 and 0.89 for calibration and validation, respectively. In conclusion, this research study demonstrated that NSRIs-3b, alongside a combined approach of ANNs models and SRIs, would be an effective tool for assessing WQPs of Lake Qaroun.

Precise and quick estimates of soil moisture content for the purpose of irrigation scheduling are fundamentally important. They can be accomplished through the continuous monitoring of moisture content in the root zone area, which can be accomplished through automatic soil moisture sensors. Commercial soil moisture sensors are still expensive to be used by famers, particularly in developing countries, such as Egypt. This research aimed to design and calibrate a locally manufactured low-cost soil moisture sensor attached to a smart monitoring unit operated by Solar Photo Voltaic Cells (SPVC). The designed sensor was evaluated on clay textured soils in both lab and controlled greenhouse environments. The calibration results demonstrated a strong correlation between sensor readings and soil volumetric water content (θ_V). Higher soil moisture content was associated with decreased sensor output voltage with an average determination coefficient (R²) of 0.967 and a root-mean-square error (RMSE) of 0.014. A sensor-to-sensor variability test was performed yielding a 0.045 coefficient of variation. The results obtained from the real conditions demonstrated that the monitoring system for real-time sensing of soil moisture and environmental conditions inside the greenhouse could be a robust, accurate, and cost-effective tool for irrigation management.

Accurately estimating crop performance under various fertilizer levels in a rapid and non-destructive manner has become a vital aspect of precision agriculture technology for both economic and environmental benefits. This study aimed to estimate different sugar beet parameters, such as total chlorophyll (Chlt), chlorophyll a (Chla), chlorophyll b (Chlb), root yield (RY), sugar yield (SY), and sugar content (SC) under five nitrogen (N) levels (0, 30, 60, 90, and 120 kg N ha⁻¹). This was achieved by using a combination of the gradient boosting regression (GBR) model with published and newly developed two- and three-band spectral indices (2D- and 3D-SRIs). The results showed that the N levels had the highest proportion of variations (80.4–92.9%) for all parameters, except for SC, which had more variation (59.9%) according to year than the N levels (37.2%). All parameters, except SC, showed a significant increase with gradually increasing N levels. Additionally, the N levels displayed linear and strong positive relationships with the chlorophyll parameters, and linear and strong negative relationships with SC, while these relationships were quadratic and strong with RY and SY. Several published and novel 3D-SRIs exhibited moderate to strong relationships (R² = 0.65–0.89) with all parameters. The newly developed 3D-SRIs, which involve wavelengths from the visible, near-infrared, and red-edge regions, such as NDI_{536, 538, 534}, NDI_{738, 750, 542}, and NDI_{448, 734, 398}, were effective in accurately estimating all parameters. Combining 2D-SRIs, 3D-SRIs, and the aggregate of all spectral indices (ASRIs) with GBR models could be a robust strategy for estimating the six observed parameters with reasonable precision. The GBR-ASF-6 SRIs and the GBR-ASF-7 SRIs models performed better in predicting Chl content and SC with R² values of 0.99 and 0.99 (RMSE = 0.073 and 1.568) for the training dataset and R² values of 0.65 and 0.78 (RMSE = 0.354 and 6.294) for the testing datasets, respectively. The obtained results concluded that published and newly developed 3D-SRIs, GBR based on 2D-SRIs or 3D-SRIs, and the aggregate of all ASRIs can be used in practice to accurately estimate the Chl content, production, and quality of sugar beet across a wide range of N levels under semiarid conditions.

The use of automatic systems in the agriculture sector enhances product quality and the country’s economy. The method used to sort fruits and vegetables has a remarkable impact on the export market and quality assessment. Although manual sorting and grading can be performed easily, it is inconsistent, time-consuming, expensive, and highly influenced by the surrounding environment. In this regard, this study aimed to design and optimize the performance of a low-cost, multi-purpose, automatic RGB color-based sensor for sorting fruits. The proposed automatic color sorting system consists of hardware components including a machine frame, belt and pulleys, conveyor belt, scanning zone, plastic boxes, electric components (stepper motors, RGB color sensors, Arduino Mega, motor drivers), and software components (Arduino IDE version 2.2.1 and C++). Calibration was performed for the light intensity sensor to measure the light intensity inside the scanning zone, the conveyor speed sensor, and the RGB color sensors by testing the RGB color channels. The sensor, the height, conveyor belt color, and light intensity should be carefully adjusted to ensure a high performance of the color-based sorting system. The results showed that the appropriate sensor height ranged from 15 to 30 mm, the optimum color of the conveyor belt was black, and scanning the objects at a light intensity of 25 lux achieved the best output signals. The RGB color sensors achieved an analytical performance similar to that obtained with manual sorting without requiring the use of computers for image processing like other automatic sorting systems do in order to gather RGB data.

Standard methods are limited for monitoring and managing water quality indicators (WQIs) in real-time and on a large scale. Consequently, there is an urgent need to use reliable, practical, swift, and cost-effective monitoring tools that can be easily deployed and assist decision makers in assessing key indicators relevant to surface water quality in a comprehensive manner. Surface water samples were collected and evaluated for water quality at 16 distinct sites across the Qaroun Lake in 2018 and 2019. Different WQIs, including total dissolved solids (TDS), transparency, total suspended solids (TSS), chlorophyll-a (Chl-a), and total phosphorus (TP), were tested for aquatic utilization. An integrated approach comprising WQIs, geospatial techniques, hyperspectral reflectance indices (SRIs) (commonly used SRIs, two-band and three-band SRIs (Spectral index calculated from water spectral reflectance of two or three wavelengths)), and partial least square regression (PLSR) models were used to assess the water quality of Qaroun Lake. According to the findings, the water quality attributes are polluted to varying degrees. The majority of commonly used SRIs presented moderately relationship with four WQIs (transparency, TSS, Chl-a, and TP) (R² = 0.45 to 0.64), while the majority of newly two-band SRIs (NSRIs-2b) indicated moderate to strong relationships with WQIs (R² = 0.51 to 0.74), and the majority of newly three band SRIs (NSRIs-3b) presented strong relationships with WQIs (R² = 0.67 to 0.81). Broadly, the highest coefficients of determination were noticed with the NSRIs-3b followed by the NSRIs-2b and then the commonly used SRIs. For example, the NSRIs-3b (NDSI_648,712,696) had stronger relationships with transparency, TSS, and Chl-a with R² = 0.77, 0.66, and 0.81, respectively, than other SRIs. In addition, the NSRIs-3b (NDSI_620,610,622) showed the highest R² of 0.73 with TSS. The NSRIs-3b coupling with PLSR predicted the WQIs with satisfactory accuracy in the calibration (reach up R² = 0.85) and validation (reach up R² = 0.81) datasets. The overall findings of this research study showed that deriving an optimized NSRIs-3b from spectrum region and combining it with PLSR model could be a practical tool for managing water quality of the Qaroun Lake by accurately, timely, and non-destructively monitoring the WQIs.

The current study aimed to design and test the accuracy of a variable-rate control metering mechanism (VRCMM) and a remote smart monitoring system (RSMS) for a precision sugarcane transplanter based on IoT technology. The VRCMM is used to operate the seedling metering device at different speeds using a stepper motor based on the travel speed, and the RSMS was employed to evaluate of the three basic parameters of seedling amount, optimum rate, and missed rate. Two types of sensors were used for detecting the sugarcane seedling (SS) and travel speed, including one ultrasonic sensor and one infrared RPM sensor. The study was performed at five travel speeds and four transplant spacings. The findings of laboratory tests showed that the mean record of the relative error between the desired stepper motor speed of the VRCMM and the real value was 3.39%, and it increased with increasing the travel speed. as Additionally, the speed regulation performance was in agreement with the transplanting index. The change in RSMS accuracy is obvious when the travel speed is high and the transplant spacing is small. The RSMS accuracy drops sharply, revealing a leaping change. In conclusion, the smart and intelligent designed sugarcane transplanter would be very useful in sugarcane production.