Microbial fuel cell (MFC) technology offers an alternative means for producing energy from waste products. In this review, several characteristics of MFC technology that make it revolutionary will be highlighted. First, a brief history presents how bioelectrochemical systems have advanced, ultimately describing the development of microbial fuel cells. Second, the focus is shifted to the attributes that enable MFCs to work efficiently. Next, follows the design of various MFC systems in use including their components and how they are assembled, along with an explanation of how they work. Finally, microbial fuel cell designs and types of main configurations used are presented along with the scalability of the technology for proper application. The present review shows importance of design and elements to reduce energy loss for scaling up the MFC system including the type of electrode, shape of the single reactor, electrical connection method, stack direction, and modulation. These aspects precede making economically applicable large-scale MFCs (over 1 m³ scale) a reality.

The green biosynthesis of zinc oxide nanoparticles (GBS ZnO NPs) using Ziziphus jujuba leaves extract assisted by ultrasonic irradiation was reported in this research work. The green biosynthesized ZnO NPs were characterized using different techniques and the results revealed the synthesis of hexagonal wurtzite crystal of GBS ZnO nanoparticles; per the XRD measurement, with average practice size of 90 ± 10 nm; based on both SEM and TEM images, and with specific surface area of 14.23 m²/g; per the nitrogen gas adsorption/desorption isotherms. The antibacterial activity of the prepared GBS ZnO NPs was explored against S. aureus and E. coli bacteria using different evaluation methods; disc diffusion, column (filter), and aqueous solution, and the results showed the effective antibacterial activities against S. aureus and E. coli bacteria, as the inhibition zones were 15 mm and 11 mm for the E. coli and S. aureus, respectively. Moreover, the anticancer activity of the green biosynthesized ZnO NPs was evaluated on two different cancer cells; human colon cancer cell lines (HCT-116) and the human liver cancer (HepG2) cells, and the experiments showed that GBS ZnO NPs had an outstanding cytotoxic effect on both cancer cell lines, as well as dose-dependent behavior, as the viability of the cancer cells decreased by using GBS ZnO NPs at concentrations of 10 and 20 µg/mL. Cell lines (HCT-116) and the human liver cancer (HepG2) cells, and the experiments showed that GBS ZnO NPs had an outstanding cytotoxic effect on both cancer cell lines, as the GBS ZnO NPs enhanced the cytotoxicity mechanism by generating ROS as the nanoparticles interact with cells, lower its cellular defense mechanism, and accordingly cause apoptosis to the cell.

The unique properties of NB, such as its nano-size effect and greater adsorption capacity, have the potential to mitigate ammonia (NH₃) emission, but may also pose threats to soil life and their associated processes, which are not well understood. We studied the influence of different NB concentrations on NH₃ emission, soil microbial biomass, nutrient mineralization, and corn nutrient uptake from farmyard manure (FM). Three different NB concentrations i.e., 12.5 (NB1), 25 (NB2), and 50% (NB3), alone and in a fertilizer mixture with FM, were applied to corn. NB1 alone increased microbial biomass in soil more than control, but other high NB concentrations did not influence these parameters. In fertilizer mixtures, NB2 and NB3 decreased NH₃ emission by 25% and 38%, respectively, compared with FM alone. Additionally, NB3 significantly decreased microbial biomass carbon, N, and soil potassium by 34%, 36%, and 14%, respectively, compared with FM. This toxicity to soil parameters resulted in a 21% decrease in corn K uptake from FM. Hence, a high NB concentration causes toxicity to soil microbes, nutrient mineralization, and crop nutrient uptake from the FM. Therefore, this concentration-dependent toxicity of NB to soil microbes and their associated processes should be considered before endorsing NB use in agroecosystems.

Platinum group elements (PGE) including Ru, Rh, Pt and Pd have been quantified in air particulate matter with an aerodynamic diameter equal or less than 10 microns (PM₁₀) using inductively coupled plasma mass spectrometry (ICP-MS). PM₁₀ aerosols have been collected from three sites representing various activities in Jeddah city, Saudi Arabia. These locations are residential site with heavy traffic, industrial site and heavy traffic and a light traffic site outside the city. To obtain reasonable data of the PGE concentrations, a group from 10 to 15 PM₁₀ samples were collected every month. The annual and seasonal variation of the mass concentration of the PGE were demonstrated. In all locations, Pt and Pd were relatively higher than Ru and Rh possibly because their main use is in automobile catalytic converters. Concentrations of observed PGE in PM₁₀ could be arranged in ascending order as: Rh < Ru < Pd < Pt. In case of Ru and Pt, there are clear similarities in terms of the overall mean concentrations at the sampling locations. Due to the high concentration of Ru, Rh and Pd at low traffic site, there are certainly other sources of these elements rather than vehicle catalytic converters. However, at the industrial/heavy traffic location, high concentrations of Ru were detected during February 2015. In addition, high Pt concentrations were also detected at the light traffic site during May 2015. Results indicate that Pt source in PM₁₀ is mainly the automobile catalytic converters.

High raw material prices and rivalry from the food industry have hampered the adoption of renewable resource-based goods. It has necessitated the investigation of cost-cutting strategies such as locating low-cost raw material supplies and adopting cleaner manufacturing processes. Exploiting waste streams as substitute resources for the operations is one low-cost option. The present study evaluates the environmental burden of biopolymer (polyhydroxyalkanoate) production from slaughtering residues. The sustainability of the PHA production process will be assessed utilising the Emergy Accounting methodology. The effect of changing energy resources from business as usual (i.e., electricity mix from the grid and heat provision utilising natural gas) to different renewable energy resources is also evaluated. The emergy intensity for PHA production (seJ/g) shows a minor improvement ranging from 1.5% to 2% by changing only the electricity provision resources. This impact reaches up to 17% when electricity and heat provision resources are replaced with biomass resources. Similarly, the emergy intensity for PHA production using electricity EU27 mix, coal, hydropower, wind power, and biomass is about 5% to 7% lower than the emergy intensity of polyethylene high density (PE-HD). In comparison, its value is up to 21% lower for electricity and heat provision from biomass.

The COVID-19 pandemic is responsible for an unprecedented disruption to the healthcare systems and economies of countries around the world. Developing novel therapeutics and a vaccine against SARS-CoV-2 requires an understanding of the similarities and differences between the various human coronaviruses with regards to their phylogenic relationships, transmission, and management. Phylogenetic analysis indicates that humans were first infected with SARS-CoV-2 in late 2019 and the virus rapidly spread from the outbreak epicenter in Wuhan, China to various parts of the world. Multiple variants of SARS-CoV-2 have now been identified in particular regions. It is apparent that MERS, SARS-CoV, and SARS-CoV-2 present with several common symptoms including fever, cough, and dyspnea in mild cases, but can also progress to pneumonia and acute respiratory distress syndrome. Understanding the molecular steps leading to SARS-CoV-2 entry into cells and the viral replication cycle can illuminate crucial targets for testing several potential therapeutics. Genomic and structural details of SARS-CoV-2 and previous attempts to generate vaccines against SARS-CoV and MERS have provided vaccine targets to manage future outbreaks more effectively. The coordinated global response against this emerging infectious disease is unique and has helped address the need for urgent therapeutics and vaccines in a remarkably short time.