This work proposes a new strategy for the improvement of the out of band response of rectangular waveguide inductive bandpass filters. The strategy consists of selecting non-uniform coupling window thicknesses along the filter structure. The basic idea is that irises of different thicknesses can produce the same coupling values in the passband but have different loading effects in the harmonic resonances. To further increase the level of spurious rejection, the above technique is combined with the use of resonators of different widths. To demonstrate the effectiveness of the proposed idea, the design of a fifth order, non-uniform Tchebyshev bandpass filter is fully described showing how the technique presented in this paper indeed results in an important improvement of the out of band performance with respect to conventional inductive filters.
This paper presents for the first time the design of manifold multiplexers in waveguide technology using all-inductive dual-mode channel filters. It is shown that very complex transfer functions can be implemented for the channels, using simple structures that can be analyzed and manufactured with increased simplicity as compared to other commercial solutions. In this paper we adapt a standard design technique for manifold multiplexers to the new proposed technology. The paper is illustrated with the design of two triplexers, using H-type and E-type waveguide manifolds, with filters implementing two transmission zeros in the insertion loss response for maximum isolation between channels. Results show that the procedure is indeed effective and can be used for the design of practical multiplexer configurations.
A refinement for the computation of the rigorous part of the multi-level fast multipole method (MLFMM) of analyzing volumetric objects is presented. A scheme based on the fast Fourier technique (FFT) is proposed with the objective of reducing the computational resources required to accurately analyze large homogeneous and non-homogeneous dielectric volumes. In order to reduce the memory requirements, the storage of the near-field terms of the method of moments (MoM) matrix is performed only for the positions corresponding to a parallelepiped with the size of the level 1 block of the MLFMM, computed with the vacuum permittivity, taking advantage of the Toeplitz symmetry present in regular hexahedral meshes. The FFT avoids applying the near-field MoM matrix in the iterative solution process. The application of this approach results in huge improvements in terms of memory usage, but also a speeds up the iterative solution process because the use of three-dimensional (3D) FFTs is very efficient for computing convolutions when the number of unknowns of the problems becomes very large as happens in volumetric problems. We also propose a new approach for the numerical treatment of the transition of the dielectric permittivity between different dielectrics or between a dielectric and a free space. To validate the computation technique, the radar cross section (RCS) of several dielectric bodies is computed using the classical MLFMM approach and it is compared with the presented FFT-based-MLFMM solution. The results demonstrate that the efficient memory and computation time usage of the proposed approach.
In this contribution, the design and manufacturing of an all-metal coaxial-line X-band bandpass filter is discussed. The device is 3D-printed as a self-supported structure without any dielectric inside the coaxial. The mechanical support between the inner and outer coaxial-line conductors is provided by means of λ/4 short-circuited stubs, which are also used in the bandpass filter design. The real transmission zeros (TZs) produced by the short-circuited stubs are responsible for a high filter selectivity. In order to enhance the filter performance, a second stage consisting in a coaxial-line stepped-impedance low-pass filter is integrated in the design to provide the rejection level required for the out-of-band behaviour. Following our design method, the bandpass and low-pass filters are designed separately, and a final matching step is performed to connect both and to achieve the aimed frequency specifications. In this way, a monoblock coaxial filter with very good in-band and out-of-band performance can by obtained by using an additive manufacturing (AM) procedure. Only the input/output (I/O) coaxial connectors will need to be assembled to the filter to perform the frequency measurements. The filters in this work can be seen as a first proposal towards more complex multi-functional monoblock structures using additively-manufactured coaxial technology, for highly-integrated RF chains. Other expected benefits beyond the compactness or lightweight are an increased RF shielding, electrostatic discharge risk reduction, and Passive Intermodulation (PIM) protection. In the paper, a prototype with a passband between 8 and 12 GHz is designed and manufactured, using a bandpass filter with three stubs and an integrated 15th-order low-pass filter, providing rejection for spurious frequencies up to 30 GHz. The filter is manufactured using Selective Laser Melting (SLM) and measurements show an excellent agreement with the simulations.
23 April 2018 in International Journal of Circuit Theory and Applications