The expansion of the electric vehicle market is driving the request for efficient and reliable power electronic systems for electric energy conversion and processing. The efficiency, size, and cost of a power system is strongly related to the performance of power semiconductor devices, where massive industrial investments and intense research efforts are being devoted to new wide bandgap (WBG) semiconductors, such as silicon carbide (SiC) and gallium nitride (GaN). The electrical and thermal properties of SiC and GaN enable the fabrication of semiconductor power devices with performance well beyond the limits of silicon. However, a massive migration of the power electronics industry towards WBG materials can be obtained only once the corresponding fabrication technology reaches a sufficient maturity and a competitive cost. In this paper, we present a perspective of power electronics based on WBG semiconductors, from fundamental material characteristics of SiC and GaN to their potential impacts on the power semiconductor device market. Some application cases are also presented, with specific benchmarks against a corresponding implementation realized with silicon devices, focusing on both achievable performance and system cost.

This brief presents an energy-efficient level shifter (LS) able to convert extremely low level input voltages to the nominal voltage domain. To obtain low static power consumption, the proposed architecture is based on the single-stage differential-cascode-voltage-switch scheme. Moreover, it exploits self-adapting pull-up networks to increase the switching speed and to reduce the dynamic energy consumption, while a split input inverting buffer is used as the output stage to further improve energy efficiency. When implemented in a commercial 180-nm CMOS process, the proposed design can up-convert from the deep subthreshold regime (sub-100 mV) to the nominal supply voltage (1.8 V). For the target voltage level conversion from 0.4 to 1.8 V, our LS exhibits an average propagation delay of 31.7 ns, an average static power of less than 60 pW, and an energy per transition of 173 fJ, as experimentally measured across the test chips.

We use mixed device-circuit simulations to predict the performance of 6T static RAM (SRAM) cells implemented with tunnel-FETs (TFETs). Idealized template devices are used to assess the impact of device unidirectionality, which is inherent to TFETs and identify the most promising configuration for the access transistors. The same template devices are used to investigate the V _DD range, where TFETs may be advantageous compared to conventional CMOS. The impact of device ambipolarity on SRAM operation is also analyzed. Realistic device templates extracted from experimental data of fabricated state-of-the-art silicon pTFET are then used to estimate the performance gap between the simulation of idealized TFETs and the best experimental implementations.

Random telegraph noise (RTN) is an important intrinsic phenomenon of any logic or memory device that is indicative of the reliability and stochastic variability in its performance. In the context of the resistive random access memory (RRAM), RTN becomes a key criterion that determines the read disturb immunity and memory window between the low (LRS) and high resistance states (HRS). With the drive towards ultra-low power memory (low reset current) and aggressive scaling to 10 × 10 nm ² area, contribution of RTN is significantly enhanced by every trap (vacancy) in the dielectric. The underlying mechanisms governing RTN in RRAM are yet to be fully understood. In this study, we aim to decode the role of conductance fluctuations caused by oxygen vacancy transport and inelastic electron trapping and detrapping processes. The influence of resistance state (LRS, shallow and deep HRS), reset depth and reset stop voltage (VRESET-STOP) on the conductance variability is also investigated.

In this paper, we identify the level shifter (LS) for voltage up-conversion from the ultralow-voltage regime as a key application domain of tunnel FETs (TFETs). We propose a mixed TFET-MOSFET LS design methodology, which exploits the complementary characteristics of TFET and MOSFET devices. Simulation results show that the hybrid LS exhibits superior dynamic performance at the same static power consumption compared with the conventional MOSFET and pure TFET solutions. The advantage of the mixed design with respect to the conventional MOSFET approach is emphasized when lower voltage signals have to be up-converted, reaching an improvement of the energy-delay product up to three decades. When compared with the full MOSFET design, the mixed TFET-MOSFET solution appears to be less sensitive toward threshold voltage variations in terms of dynamic figures of merit, at the expense of higher leakage variability. Similar results are obtained for four different LS topologies, thus indicating that the hybrid TFET-MOSFET approach offers intrinsic advantages in the design of LS for voltage up-conversion from the ultralow-voltage regime compared with the conventional MOSFET and pure TFET solutions.