This brief presents an energy-efficient level shifter (LS) able to convert extremely low level input voltages to the nominal voltage domain. To obtain low static power consumption, the proposed architecture is based on the single-stage differential-cascode-voltage-switch scheme. Moreover, it exploits self-adapting pull-up networks to increase the switching speed and to reduce the dynamic energy consumption, while a split input inverting buffer is used as the output stage to further improve energy efficiency. When implemented in a commercial 180-nm CMOS process, the proposed design can up-convert from the deep subthreshold regime (sub-100 mV) to the nominal supply voltage (1.8 V). For the target voltage level conversion from 0.4 to 1.8 V, our LS exhibits an average propagation delay of 31.7 ns, an average static power of less than 60 pW, and an energy per transition of 173 fJ, as experimentally measured across the test chips.
28 May 2021 in IEEE Journal of Solid-State Circuits
This article introduces a compact NMOS-only voltage reference that is able to operate down to a 0.25-V supply voltage and 5.4-pW power consumption. This allows reliable generation of a stable output voltage even in harvested systems under highly uncertain environmental conditions. At the system level, pW-power, 0.25–1.8-V operation, and a competitive power supply rejection ratio (PSRR) relax or eliminate the need for intermediate power conversion and supply regulation for additional power and cost reductions. The proposed voltage reference is based on a body biasing scheme assisted by replica well biasing to compensate voltage and temperature fluctuations. A 180-nm test chip shows that the proposed reference occupies an area of $2200~\mu \text{m}^{2}$ , while providing 91.4-mV output voltage with 0.51-mV (0.56%) standard deviation, $24.2~\mu \text{V}/^{\circ }\text{C}$ (265 ppm/°C) temperature coefficient, and $144.5~\mu \text{V}$ /V (0.16%/V) line sensitivity across 30 dice from the same manufacturing lot. The resulting absolute output voltage accuracy without any trimming is 2.8 mV at 3- $\sigma $ variations, 0.3-V fluctuation, and temperature change by 50 °C, improving on prior art by 1.4– $19.7\times $ . Overall, the capability of reliable operating down to ultralow voltages, pW-power, and the inherently small footprint make the proposed reference well suited for low-cost tightly constrained systems.
This paper introduces the concept of spin–orbit-torque-magnetic random access memory (SOT-MRAM) based physical unclonable function (PUF). The secret of the PUF is stored into a random state of a matrix of perpendicular SOT-MRAMs. Here, we show experimentally and with micromagnetic simulations that this random state is driven by the intrinsic nonlinear dynamics of the free layer of the memory excited by the SOT. In detail, a large enough current drives the magnetization along an in-plane direction. Once the current is removed, the in-plane magnetic state becomes unstable evolving toward one of the two perpendicular stable configurations randomly. In addition, we propose a hybrid CMOS/spintronics model to simulate a PUF realized by an array of 16 × 16 SOT-MRAM cells and evaluate the electrical characteristics. Hardware authentication based on this PUF scheme has several characteristics, such as CMOS-compatibility, non-volatility (no power consumption in standby mode), reconfigurability (the secret can be reprogrammed), and scalability, which can move a step forward the design of spintronic devices for application in security.
11 August 2017 in IEEE Transactions on Electron Devices
The aim of this paper is to introduce a compact model for perpendicular spin-transfer torque (STT)-magnetic tunnel junctions (MTJs) implemented in Verilog-A to assure easy integration with electrical circuit simulators. It takes into account the effects of voltage-dependent perpendicular magnetic anisotropy, temperature-dependent parameters, thermal heating/cooling, MTJ process variations, and the spin-torque asymmetry of the Slonczewski spin-polarization function in the switching process. This translates into a comprehensive modeling that was adopted to investigate the writing performance under voltage scaling of a $256\times256$ STT- magnetic random access memory array implemented at three different technology nodes. Obtained results show that scaling from 30- to 20-nm node allows a write energy saving of about 43%, while the supply voltage that assures the minimum-energy write operation increases.
31 October 2017 in IEEE Transactions on Circuits and Systems I: Regular Papers
In this paper, a variation-aware simulation framework for hybrid circuits comprising MOS transistors and magnetic tunnel junction (MTJ) devices is presented. The framework is based on one-time characterization via micromagnetic multi-domain simulations, overcoming the inaccuracies introduced by single-domain analysis, which most of the existing frameworks are based on. As further distinctive capability, non-Gaussian stochastic variations of the MTJ write switching time are explicitly modeled through a Skew Normal distribution, making the model suitable for low-power and low-voltage designs. The framework involves the use of a Verilog-A look-up table-based model, which assures easy integration with commercial design tools. Our strategy is evaluated on a spin-transfer torque-magnetoresistive random access memory (MRAM) working in RAM and true random number generator (TRNG) modes. In RAM mode, while the commonly-used approach based on Gaussian-distributed switching statistics tends to underestimate the pulse width required for a write error rate of 10⁻⁶ by about 20%, our Skew Normal-based strategy allows tracking reference micromagnetic results with an average error less than 4%. In TRNG mode, our approach also allows a better tracking of the reference 50%-switching probability contour with an error less than 1%. However, the incorporation of the Skew Normal distribution in our Verilog-A model results in an increase of the CPU time by 50% on average as compared with the use of the built-in statistical functions.
27 February 2017 in Progress in Photovoltaics: Research and Applications