Although solution processed metal nanowire (NW) percolation networks are a strong candidate to replace commercial indium tin oxide, their performance is limited in thin film device applications due to reduced effective electrical areas arising from the dimple structure and percolative voids that single size metal NW percolation networks inevitably possess. Here, we present a transparent electrode based on a dual-scale silver nanowire (AgNW) percolation network embedded in a flexible substrate to demonstrate a significant enhancement in the effective electrical area by filling the large percolative voids present in a long/thick AgNW network with short/thin AgNWs. As a proof of concept, the performance enhancement of a flexible phosphorescent OLED is demonstrated with the dual-scale AgNW percolation network compared to the previous mono-scale AgNWs. Moreover, we report that mechanical and oxidative robustness, which are critical for flexible OLEDs, are greatly increased by embedding the dual-scale AgNW network in a resin layer.
28 January 2014 in ACS Applied Materials & Interfaces
The lithium-ion battery (LIB) is a promising energy storage system that has dominated the energy market due to its low cost, high specific capacity, and energy density, while still meeting the energy consumption requirements of current appliances. The simple design of LIBs in various formats—such as coin cells, pouch cells, cylindrical cells, etc.—along with the latest scientific findings, trends, data collection, and effective research methods, has been summarized previously. These papers addressed individual design parameters as well as provided a general overview of LIBs. They also included characterization techniques, selection of new electrodes and electrolytes, their properties, analysis of electrochemical reaction mechanisms, and reviews of recent research findings. Additionally, some articles on computer simulations and mathematical modeling have examined the design of full-cell LIBs for power grid and electric vehicle applications. To fully understand LIB operation, a simple and concise report on design parameters and modification strategies is essential. This literature aims to summarize the design parameters that are often overlooked in academic research for the development of full-cell LIBs.
22 March 2022 in ACS Applied Materials & Interfaces
Organic-inorganic hybrid perovskite materials have attracted tremendous attention as a key material in various optoelectronic devices. Distinctive optoelectronic properties, such as a tunable energy band position, long carrier diffusion lengths, and high charge carrier mobility, have allowed rapid progress in various perovskite-based optoelectronic devices (solar cells, photodetectors, light emitting diodes (LEDs), and lasers). Interestingly, the developments of each field are based on different characteristics of perovskite materials which are suitable for their own applications. In this review, we provide the fundamental properties of perovskite materials and categorize the usages in various optoelectronic applications. In addition, the prerequisite factors for those applications are suggested to understand the recent progress of perovskite-based optoelectronic devices and the challenges that need to be solved for commercialization.
We demonstrate ZnO nanowire based UV sensor by laser‐induced hydrothermal growth of ZnO nanowire. By inducing a localized temperature rise using focused laser, ZnO nanowire array at ~15 μm size consists of individual nanowires with ~8 μm length and 200~400 nm diameter is readily synthesized on gold electrode within 30 min at the desired position. The laser‐induced growth process is consecutively applied on two different points to bridge the micron gap between the electrodes. The resultant photoconductive ZnO NW interconnections display 2~3 orders increase in the current upon the UV exposure at a fixed voltage bias. It is also confirmed that the amount of photocurrent can be easily adjusted by changing the number of ZnO NW array junctions. The device exhibits clear response to the repeated UV illumination, suggesting that this process can be usefully applied for the facile fabrication of low‐cost UV sensor array.