Bioethanol, as a renewable energy source, has been widely used in the energy sector, particularly in replacing traditional petroleum energy, and holds great potential. This study involves a whole life cycle assessment of bioethanol production and the co-production of high-value by-products—xylose, lignin, and steam—using three types of waste biomass: corn cobs, corn straw, and wheat straw as feedstocks by chopping, pretreatment, hydrolysis, fermentation, and distillation methods. Secondly, the benefits of three raw materials are compared for preparing bioethanol, and their impact on the environment and energy production is analyzed. The comparison indicates that corn cobs offer the best overall benefits, with a net energy balance (NEB) of 6902 MJ/Mg of ethanol and a net energy ratio (NER) of 1.30. The global warming potential (GWP) is 1.75 × 10⁻², acidification potential (AP) is 1.02 × 10⁻², eutrophication potential (EP) is 2.63 × 10⁻⁴, photochemical ozone creation potential (POCP) is 3.19 × 10⁻⁸, and human toxicity potential (HTP) is 1.52 × 10⁻⁴. This paper can provide a theoretical reference and data supporting the green refining of bioethanol and the high-value utilization of by-products, and broaden its application prospects.

Replacing fossil fuels with bioenergy is crucial to achieving sustainable development and carbon neutrality. To determine the priorities and developing trends of bioenergy technology, related publications from 2000 to 2020 were analyzed using bibliometric method. Results demonstrated that the number of publications on bioenergy increased rapidly since 2005, and the average growth rate from 2005 to 2011 reached a maximum of 20% per year. In terms of publication quantity, impact, and international collaboration, the USA had been leading the research of bioenergy technology, followed by China and European countries. Co-occurrence analysis using author keywords identified six clusters about this topic, which are “biodiesel and transesterification”, “biogas and anaerobic digestion”, “bioethanol and fermentation”, “bio-oil and pyrolysis”, “microalgae and lipid”, and “biohydrogen and gasification or dark fermentation”. Among the six clusters, three of them relate to liquid biofuel, attributing that the liquid products of biomass are exceptional alternatives to fossil fuels for heavy transportation and aviation. Lignocellulose and microalgae were identified as the most promising raw materials, and pretreating technologies and efficient catalysts have received special attention. The sharp increase of “pyrolysis” and “gasification” from 2011 to 2020 suggested that those technologies about thermochemical conversion have been well studied in recent years. Some new research trends, such as applying nanoparticles in transesterification, and hydrothermal liquefaction in producing bio-oil from microalgae, will get a breakthrough in the coming years.

The thermo-chemical conversion of biomass wastes is a practical approach for the value-added reclamation of bioenergy in large quantities, and pyrolysis plays a core role in this process. In this work, poplar (PR) and cedar (CR) were used as staple wood biomasses to investigate the apparent kinetics of TG/DTG at different heating rates. Secondly, miscellaneous wood chips (MWC), in which PR and CR were mixed in equal proportion, were subjected to comprehensive investigations on their pyrolysis behavior and product evolution in a fixed bed reactor with pyrolysis temperature, catalyst, and the flow rate H₂O steam as influencing factors. The results demonstrated that both PR and CR underwent three consecutive pyrolysis stages, the TG/DTG curves shifted to higher temperatures, and the peak temperature intervals also enhanced as the heating rate increased. The kinetic compensation effect expression and apparent reaction kinetic model of CR and PR pyrolysis were obtained based on the law of mass action and the Arrhenius equation; the reaction kinetic parameter averages of Ea and A of its were almost the same, which were about 72.38 kJ/mol and 72.36 kJ/mol and 1147.11 min⁻¹ and 1144.39 min⁻¹, respectively. The high temperature was beneficial for the promotion of the pyrolysis of biomass, increased pyrolysis gas yield, and reduced tar yield. This process was strengthened in the presence of the catalyst, thus significantly increasing the yield of hydrogen-rich gas to 117.9 mL/g_-biomass. It was observed that H₂O steam was the most effective activator for providing a hydrogen source for the whole reaction process, promoted the reaction to proceed in the opposite direction of H₂O steam participation, and was beneficial to the production of H₂ and other hydrocarbons. In particular, when the flow rate of H₂O steam was 1 mL/min, the gas yield and hydrogen conversion were 76.94% and 15.90%, and the H₂/CO was 2.07. The yields of H₂, CO, and CO₂ in the gas formation were significantly increased to 107.35 mL/g_-biomass, 53.70 mL/g_-biomass, and 99.31 mL/g_-biomass, respectively. Therefore, H₂ was the most dominant species among gas products, followed by C-O bond-containing species, which provides a method for the production of hydrogen-rich gas and also provides ideas for compensating or partially replacing the fossil raw material for hydrogen production.

Soil water erosion is considered to be a major threat to ecosystems and an important environmental problem. Aggravation of soil and water loss in the Three-River Headwaters Region (TRHR) is a prominent problem in China. In this research, the Revised Universal Soil Loss Equation (RUSLE) was applied to evaluate annual soil loss caused by water erosion in the TRHR from 2000 to 2020. Spatiotemporal patterns of soil water erosion were analyzed and the main driving factors of rainfall erodibility and vegetation coverage were investigated using ArcGIS spatial analysis. The results revealed that during the study period, soil erosion in the TRHR averaged 10.84 t/hm²/a, and values less than 25 t/hm²/a were characterized as micro and mild erosion. The soil erosion modulus observed a slightly increasing trend over the past decade. The changing trends in the Yangtze, Huanghe, and Lancang river source regions (YRSR, HRSR, and LRSR) were 0.03, 0.07, and 0.03 t/hm²/a, respectively. Both rainfall erodibility and vegetation coverage observed a growing trend, with slopes of 6.78 MJ·mm/(t·hm²·a) and 0.12%/a, respectively. In general, variation of rainfall erodibility showed a relatively higher contribution to soil erosion than vegetation coverage. Findings of this study could provide information for sustainable vegetation restoration, soil conservation, and water management at a regional scale.

Multi-stage A/O-MBR processes were designed to improve wastewater treatment efficiency; three different designs were carried out and compared in this study. The 2(A/O)-MBR process, i.e., with two sets of anoxic/oxic tanks in series, showed better effluent quality than A/O-MBR and 3(A/O)-MBR processes. The removal rates of COD, NH${}_4^{+}$-N, TP and TN were 95.29%, 89.47%, 83.55% and 78.58%, respectively, complying satisfactorily with China’s urban sewage treatment plant pollutant discharge standards. In terms of membrane fouling, the 3(A/O)-MBR process demonstrated the lowest fouling propensity. The microbial community structure in each bioreaction tank was analyzed, the results from which matched with the process efficiency and fouling behavior.

Antibiotic residues lead to the risk of resistance gene enrichment, which is the main reason why penicillin mycelial dreg (PMD) is defined as hazardous waste. Hydrothermal treatment (HT) is an effective method to treat penicillin mycelial dreg, but the degradation mechanism of penicillin is unclear. In the study, we researched the effects of pH (4–10) at 80–100 °C and metal ions (Mn²⁺, Fe²⁺, Cu²⁺, and Zn²⁺) at several concentrations on the HT of penicillin, identified the degradation products (DPs) under different conditions, and evaluated the antibacterial activity of hydrothermally treated samples. The results show that penicillin degradation kinetics highly consistent with pseudo-first-order model (R² = 0.9447–0.9999). The degradation rates (k) at pH = 4, 7, and 10 were 0.1603, 0.0039, and 0.0485 min⁻¹, indicating acidic conditions were more conducive to penicillin degradation. Among the four tested metal ions, Zn²⁺ had the most significant catalytic effect. Adding 5 mg·L⁻¹ Zn²⁺ caused 100% degradation rate at pH = 7 after HT for 60 min. Six degradation products (DPs) with low mass-to-charge (m/z ≤ 335) were detected under acidic condition. However, only two and three DPs were observed in the samples catalyzed by Zn²⁺ and alkali, respectively, and penilloic acid (m/z = 309) was the main DPs under these conditions. Furthermore, no antibacterial activity to Bacillus pumilus was detected in the medium with up to 50% addition of the treated samples under acidic condition. Even though acid, alkali, and some metal ions can improve the degradation ability of penicillin, it was found that the most effective way for removing its anti-bacterial activity was under the acidic condition. Therefore, resistance residue indicates the amount of additive in the process of resource utilization, and avoids the enrichment of resistance genes.