Curauá is a bromeliad of Amazonian origin, present in some states in the northern region of Brazil and in other countries in South America. Its natural fibers have several technological advantages for application in composite materials. The objective of this research was to investigate the potential of using the fiber of Curauá as a reinforcement element in mortars for wall covering. Mortars were made with a 1:1:6 ratio (cement:lime:sand) in relation to their mass, evaluating the effect of adding 1%, 2% and 3% of Curauá fiber natural and fiber treated in NaOH solution in relation to the mass of cement, compared to the reference mixture (0%). Technological properties such as consistency, water retention and incorporated air content, compressive strength, water absorption and durability in wetting and drying cycles were evaluated. The results showed that the addition of the Curauá fiber causes an improvement in the mechanical properties of mortars, and at levels of addition 3% or more, it causes problems of workability and incorporation of air into the dough, thus, the fiber addition in 2% presented better results for application in coating mortars, in relation a Brazilian norm, even improving the durability of external coatings.

The engineering application of natural lignocellulosic fibers (NLFs) has been intensifying all over the world due to their low cost and abundance, as well as their being eco-friendly and presenting favorable technological properties in polymeric and cementitious composites. Brazil, especially the Amazon region, owing to its climate and geographic position, has an abundant variety of NLFs that are still unexplored with great potential for use in various composite materials and applications such as civil construction, automobile parts and armor. Therefore, this review aims to establish a parallel between the technological properties of cementitious composites reinforced with Amazon NLFs, both in fresh and hardened states, and to analyze, compare results and contribute to a better understanding of the similarities and differences between the types of reinforcements. A relevant contribution of this review is the possibility of improving knowledge about Amazon NLFs, showing their potential for application in eco-friendly materials, in addition to contributing to studies with new NLFs not yet applied in composite. For this, it was necessary to carry out a literature survey on the physical, chemical and mechanical properties of cementitious composites reinforced with NLFs, in addition to analyzing case studies involving fibers such as curaua, açai, bamboo, jute and sisal. It can be concluded that the physical and chemical characteristics of the Amazon NLFs directly influence the technological properties of cementitious compounds, such as mechanical strength and water absorption. However, there might be a need for surface treatment aimed at improving adhesion and durability of the cementitious composite. Finally, some suggestions for future research work are highlighted in order to show the need to continue investigations on the application of Amazon NLFs in cementitious composites.