Andrei Olisov

Mr. Andrei Olisov

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 November 2020 in Fibers
Verified
Journal Article
Open access
PDF file
AAAfonso Azevedo
Afonso Azevedo
Sergey V. KlyuevSergey V. Klyuev
Sergey V. Klyuev
MARKSSUEL TEIXEIRA MARVILAMARKSSUEL TEIXEIRA MARVILA
MARKSSUEL TEIXEIRA MARVILA
Nikolai Ivanovich VatinNikolai Ivanovich Vatin
Nikolai Ivanovich Vatin
NANataliya Alfimova
Nataliya Alfimova
AOAndrei Olisov
Andrei Olisov
Curauá is a bromeliad of Amazonian origin, present in some states in the northern region of Brazil and in other countries in South America. Its natural fibers have several technological advantages for application in composite materials. The objective of this research was to investigate the potential of using the fiber of Curauá as a reinforcement element in mortars for wall covering. Mortars were made with a 1:1:6 ratio (cement:lime:sand) in relation to their mass, evaluating the effect of adding 1%, 2% and 3% of Curauá fiber natural and fiber treated in NaOH solution in relation to the mass of cement, compared to the reference mixture (0%). Technological properties such as consistency, water retention and incorporated air content, compressive strength, water absorption and durability in wetting and drying cycles were evaluated. The results showed that the addition of the Curauá fiber causes an improvement in the mechanical properties of mortars, and at levels of addition 3% or more, it causes problems of workability and incorporation of air into the dough, thus, the fiber addition in 2% presented better results for application in coating mortars, in relation a Brazilian norm, even improving the durability of external coatings.

2 November 2020 in Fibers
Verified
Journal Article
Open access
PDF file
Makhmud KharunMakhmud Kharun
Makhmud Kharun
Sergey V. KlyuevSergey V. Klyuev
Sergey V. Klyuev
Dmitry KoroteevDmitry Koroteev
Dmitry Koroteev
PCPaschal Chiadighikaobi
Paschal Chiadighikaobi
Roman FediukRoman Fediuk
Roman Fediuk
NANataliya Alfimova
Nataliya Alfimova
Expanded clay concrete (ECC) is a promising structural material for buildings due to its light weight and heat- and sound-insulating properties. Adding basalt fibers (BFs) in ECC reduces its brittleness and enhances its mechanical properties. The heat treatment (HT) of BF-reinforced ECC can significantly accelerate the strength growth during cast-in-situ construction, which allows the reduction of the turnover of the formwork and the construction period, as well as leading to lower construction costs. This paper presents an HT technology for load-bearing structures, containing a BF-reinforced ECC mix and using infrared rays for cast-in-situ construction. The issue of the strength growth of BF-reinforced ECC during HT has been studied. Microsilica and fly ash were added to the ECC mix to obtain a compressive strength of more than 20 MPa. Four different mixes of ECC with chopped BFs in the ratios of 1:0, 1:0.0045, 1:0.009 and 1:0.012 by weight of cement were studied. Test specimens were heated by infrared rays for 7, 9, 11, 13, 16 and 24 h. Then, the heat-treated specimens were tested for compressive strength after 0.5, 4, 12 and 24 h cooling periods. The analysis and evaluation of the experimental data were carried out based on probability theory and mathematical statistics. Mathematical models are proposed for forecasting the strength growth of BF-reinforced ECC during cast-in-situ construction.

21 December 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
EEEgor Alekseevich Efremenkov
Egor Alekseevich Efremenkov
Nikita MartyushevNikita Martyushev
Nikita Martyushev
Vadim SkeebaVadim Skeeba
Vadim Skeeba
MGMaria V. Grechneva
Maria V. Grechneva
AOAndrei Olisov
Andrei Olisov
AEAnatoly D. Ens
Anatoly D. Ens
Purpose: In the present work, different combinations of fits and accuracies, in relation to the profiles of mating parts, have been analysed in order to assess the degree of the engagement of transmissions that contain intermediate rolling elements. The aim of this work is to determine which fits have decreased accuracy, but nevertheless provide a minimum manufacturing clearance for the transmission engagement in order to reduce the cost of parts production. Methods and materials: Considering the normal probabilistic distribution law in relation to the obtained dimensions of the manufacturing equipment, a combination of fits were selected using the incomplete interchangeability method, taking into account the peculiarities of the cycloid engagement in transmissions with intermediate rolling elements (IRE). Results: Having studied various combinations of fits of parts that are engaged in transmissions with intermediate rolling elements and a free cage (IREFC), a combination of fits for a “ring, rolling-element cam” were determined, in which a technological clearance of 3 µm is formed in the engagement. At the same time, cycloid disk profiles are manufactured according to the 9th tolerance grade, which reduces the laboriousness and cost of the production. Discussion. When reducing the manufacturing accuracy of cycloid disks, it is possible to obtain both very ample clearances and significant negative allowances. For example, having manufactured a ring with the H9 fit, rolling elements with h6 and a cam with js9, the maximum manufacturing clearance can reach 0.086 mm, while the clearance limits vary from 0.025 mm to 0.061 mm. Additionally, if mating parts are manufactured using a combination of K9-h6-js9 fits, a negative allowance varying from 0.014 mm to 0.026 mm will emerge in the engagement. Both described cases are unacceptable because both ample clearances and large negative allowances will negatively influence the working capacity of the mechanism. However, it is possible to select a combination of fits using the 9th tolerance grade of the basic parts, by which the parts will contact in the range from a small negative allowance of 1 µm to a clearance of 3–4 µm. Furthermore, if this is considered, taking into account the machine settings, it is possible to obtain parts according to the 9th accuracy tolerance grade and, at the same time, provide a clearance in the engagement that is almost equal to zero. Moreover, such a combination of fits is relevant for any transmission with IRE. This is a positive result because it reduces the laboriousness when manufacturing parts and, at the same time, provides high accuracy of the mechanism. Conclusions: It has been established that when lowering the accuracy of manufacturing transmission parts with IRE, both clearances and negative allowances may occur in the engagement, depending on the combination of fits. At the same time, it is possible to select such a combination of fits, by which the parts manufactured according to the 9th tolerance grade, will provide almost zero clearance of the engagement of the transmission. In this way, it is possible to reduce the cost of manufacturing the parts for gears with intermediate rolling elements and, at the same time, maintain a high accuracy of the transmission mechanism.

23 November 2018 in Materials
Verified
Journal Article
Open access
PDF file
VPVladimir Promakhov
Vladimir Promakhov
AZAlexander Zhukov
Alexander Zhukov
YDYana Dubkova
Yana Dubkova
IZIlya Zhukov
Ilya Zhukov
SKSergey Kovalchuk
Sergey Kovalchuk
NSNadezhda Savkina
Nadezhda Savkina
This investigation focused on obtaining samples from ceramic composite materials, based on the ZrO2–20%Al2O3 system, using the additive layer-by-layer fusion technology for thermoplastic systems. The structure and phase composition of the initial powders were studied, experimental samples were produced, and the structure and properties of the experimental samples that were obtained using additive technologies were analysed. The measured static bending strength of the samples was 450 ± 70 MPa, microhardness was 14 GPa, and the elasticity modulus was 280 ± 25 GPa. The strength of these samples are slightly inferior to that of similar materials, obtained using Ceramic Injection Molding technology because our samples were characterised by the residual porosity of about 15%.

9 March 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
VPVladimir Promakhov
Vladimir Promakhov
AMAlexey Matveev
Alexey Matveev
NSNikita Schulz
Nikita Schulz
MGMikhail Grigoriev
Mikhail Grigoriev
AOAndrei Olisov
Andrei Olisov
VKViktor A. Klimenko
Viktor A. Klimenko
Currently, metal–matrix composite materials are some of the most promising types of materials, and they combine the advantages of a metal matrix and reinforcing particles/fibres. Within the framework of this article, the high-temperature synthesis of metal–matrix composite materials based on the (Ni-Ti)-TiB2 system was studied. The selected approaches make it possible to obtain composite materials of various compositions without contamination and with a high degree of energy efficiency during production processes. Combustion processes in the samples of a 63.5 wt.% NiB + 36.5 wt.% Ti mixture and the phase composition and structure of the synthesis products were researched. It has been established that the synthesis process in the samples proceeds via the spin combustion mechanism. It has been shown that self-propagating high-temperature synthesis (SHS) powder particles have a composite structure and consist of a Ni-Ti matrix and TiB2 reinforcement inclusions that are uniformly distributed inside it. The inclusion size lies in the range between 0.1 and 4 µm, and the average particle size is 0.57 µm. The obtained metal-matrix composite materials can be used in additive manufacturing technologies as ligatures for heat-resistant alloys, as well as for the synthesis of composites using traditional methods of powder metallurgy.

10 September 2019 in Russian Physics Journal
Verified
Journal Article
Closed access
PDF file
VPVladimir Promakhov
Vladimir Promakhov
AZAlexander Zhukov
Alexander Zhukov
AVAlexander Vorozhtsov
Alexander Vorozhtsov
NSN. A. Schults
N. A. Schults
SKSergey Kovalchuk
Sergey Kovalchuk
VKViktor A. Klimenko
Viktor A. Klimenko