Techniques based on plasmonic resonance can provide label-free, signal enhanced, and real-time sensing means for bioparticles and bioprocesses at the molecular level. With the development in nanofabrication and material science, plasmonics based on synthesized nanoparticles and manufactured nano-patterns in thin films have been prosperously explored. In this short review, resonance modes, materials, and hybrid functions by simultaneously using electrical conductivity for plasmonic biosensing techniques are exclusively reviewed for designs containing nanovoids in thin films. This type of plasmonic biosensors provide prominent potential to achieve integrated lab-on-a-chip which is capable of transporting and detecting minute of multiple bio-analytes with extremely high sensitivity, selectivity, multi-channel and dynamic monitoring for the next generation of point-of-care devices.

We proposed and demonstrated a novel tilted fiber Bragg grating (TFBG)-based surface plasmon resonance (SPR) label-free biosensor via a special boronic acid derivative to detect glycoprotein with high sensitivity and selectivity. TFBG, as an effective sensing element for optical sensing in near-infrared wavelengths, possess the unique capability of easily exciting the SPR effect on fiber surface which coated with a nano-scale metal layer. SPR properties can be accurately detected by measuring the variation of transmitted spectra at optical communication wavelengths. In our experiment, a 10° TFBG coated with a 50 nm gold film was manufactured to stimulate SPR on a sensor surface. To detect glycoprotein selectively, the sensor was immobilized using designed phenylboronic acid as the recognition molecule, which can covalently bond with 1,2- or 1,3-diols to form five- or six-membered cyclic complexes for attaching diol-containing biomolecules and proteins. The phenylboronic acid was synthetized with long alkyl groups offering more flexible space, which was able to improve the capability of binding glycoprotein. The proposed TFBG-SPR sensors exhibit good selectivity and repeatability with a protein concentration sensitivity up to 2.867 dB/ (mg/mL) and a limit of detection (LOD) of 15.56 nM.

The thickness of a transparent layer of oil upon the surface of water is measured as the distance between the surface of oil film and the interface of the oil with the water. Two experimental results have demonstrated that the interface can reflect a white-light beam well enough to form an interferogram, even if the light is subjected to oil-film dispersion. When a beam of white light is incident vertically onto the oil-film surface, a scanning white-light interferometer in the Michelson configuration is employed to locate two serial reflections, surface reflection and interface reflection. The thickness of the transparent oil film on water is calculated based on the separation of these two interferograms. A limitation thickness, ~250 μm with 1.25 μm resolution, is achieved under the condition that there is 50 nW of optical power incident onto the oil-film surface with a wavelength centered at 1310 nm.

The Brillouin optical time-domain analysis (BOTDA)-based optical fiber method has been proposed to measure strain variations caused by corrosion expansion. Spatial resolutions of 1 m can be achieved with this kind of Brillouin sensor for detecting the distributed strain. However, when the sensing fiber is wound around the steel rebar in a number of circles in a range of several meters, this spatial resolution still has limitations for corrosion monitoring. Here, we employed a low-coherent fiber-optic strain sensor (LCFS) to survey the performance of Brillouin sensors based on the fact that the deformation measured by the LCFS equals the integral of the strains obtained from Brillouin sensors. An electrochemical accelerated corrosion experiment was carried out and the corrosion expansion was monitored by both BOTDA and the LCFS. Results demonstrated that the BOTDA can only measure the expansion strain of about 1,000 με, which was generated by the 18 mm steel rebar corrosion, but, the LCFS had high sensitivity from the beginning of corrosion to the destruction of the structure, and no obvious difference in expansion speed was observed during the acceleration stage of the corrosion developed in the reinforced concrete (RC) specimens. These results proved that the BOTDA method could only be employed to monitor the corrosion inside the structure in the early stage.

A high performance humidity sensor using tilted fiber Bragg grating (TFBG) and functional graphene oxide (GO)/multi-walled carbon nanotubes (MWCNTs) hybrid nano-materials was proposed. The humidity-sensitive material with three-dimensional (3D) structure was synthesized by the MWCNTs and GOs. Comparing with traditional two dimensional (2D) GOs film, water molecules could be absorbed effectively due to the larger ripples and more holes in GO/MWCNTs layers. The water molecule will fill the entire space in the 3D structure instead of air, which further enhances the absorption efficiency of the hybrid nanomaterial. TFBG as a compact and robust surrounding complex dielectric constant sensing platform was utilized. The mode coupling coefficient or the amplitude of TFBG cladding mode will vary sharply with the imaginary part of permittivity of the hybrid nanomaterial, realizing the high performance RH sensing. In the experiments, we successfully demonstrated that this 3D structural nanomaterial composed by the MWCNTs and GOs has significant advantages for expanding the range of humidity detection (range from 30% to 90%) and enhancing the detection sensitivity (0.377 dB/% RH is twice more than humidity sensor with 2D GO film). The TFBG-based RH sensor also exhibits good repeatability and stability. Our proposed humidity sensor has potential application in environmental and healthy monitoring fields.