Reinforced concrete core walls serve as the primary lateral load-resisting system in mid- and high-rise buildings, providing stability against wind and earthquake forces. Many of these walls feature non-planar cross-sections that lead to complex deformation modes, which require discretizing the wall segments for accurate numerical simulation. This paper investigates the dynamic response of U-shaped RC core walls using state-of-the-practice micro- and macroscopic modeling techniques, namely: Three-dimensional solid elements, nonlinear Beam-Truss Models, the force–displacement version of the Multiple-Vertical-Line-Element-Model, and the Applied Element Method. These models are validated against newly obtained large-scale shake table test data, assessing both global and local structural responses. Key parameters, including displacements, shear forces, rotations, torque, strain distributions, and shear deformations, are analyzed to refine numerical modeling approaches. Findings highlight some of the limitations of the different modeling approaches and provide best-practice recommendations for engineers to improve predictive accuracy. This study advances the understanding of non-planar RC wall behavior, aiding in the development of more reliable seismic design methodologies.
19 September 2025 in Bulletin of Earthquake Engineering
The Applied Element Method (AEM) has in the recent years been increasingly employed to assess the failure mechanisms developed by structures subjected to dynamic loading. However, its use in the detailed estimation of local response parameters such as strains, curvature, and other localised deformations of reinforced concrete (RC) elements under seismic excitation, is not common. In this context, we explore the feasibility of using the AEM to reproduce, in blind-prediction fashion, the recent shake-table axial-flexural-torsional response of a 40-ton half-scale reinforced concrete U-shaped wall specimen. The accuracy of the adopted modelling approach in capturing the experimentally observed translational-torsional structural response of the tested structure is demonstrated through the comparison between numerical predictions, obtained before the publication of the test results (and thus without post-test model improvements), and the experimental measurements, considering both global and local response quantities. On a somewhat separate note, this study also examined the manner in which currently available formulations are capable of estimating residual drifts in RC walls, and proposes an updated equation that is shown to predict, with a good degree of accuracy, post-earthquake shaking residual displacements for this type of structures.