Steel structures are designed to operate in an elastic domain, but sometimes plastic strains induce damage and fracture. Besides experimental investigation, a phase-field damage model (PFDM) emerged as a cutting-edge simulation technique for predicting damage evolution. In this paper, a von Mises metal plasticity model is modified and a coupling with PFDM is improved to simulate ductile behavior of metallic materials with or without constant stress plateau after yielding occurs. The proposed improvements are: (1) new coupling variable activated after the critical equivalent plastic strain is reached; (2) two-stage yield function consisting of perfect plasticity and extended Simo-type hardening functions. The uniaxial tension tests are conducted for verification purposes and identifying the material parameters. The staggered iterative scheme, multiplicative decomposition of the deformation gradient, and logarithmic natural strain measure are employed for the implementation into finite element method (FEM) software. The coupling is verified by the ‘one element’ example. The excellent qualitative and quantitative overlapping of the force-displacement response of experimental and simulation results is recorded. The practical significances of the proposed PFDM are a better insight into the simulation of damage evolution in steel structures, and an easy extension of existing the von Mises plasticity model coupled to damage phase-field.
Symmetry plays a key role in the study of stress and strain analysis of spherical tanks, as described in detail in the main text. The inherent geometric symmetry of a spherical tank–being uniform in all directions from its center–allows for significant simplification of finite element models. This radial symmetry means that the stress and strain fields under uniform internal pressure are also symmetrical, reducing the computational domain to a small, representative portion of the tank rather than the entire structure. By using these symmetry principles, the study not only ensures the accuracy of its predictions but also achieves a high degree of computational efficiency, making complex engineering problems easier and more accessible. The application of symmetry, therefore, is not just a theoretical concept but a practical tool that underlies the methodology and success of this analysis. This study investigates the mechanical behavior of a spherical tank subjected to internal fluid pressure, utilizing the finite element method (FEM) as a primary analytical tool. Spherical tanks are widely used for the storage of various fluids, including liquefied natural gas (LNG), compressed gases, and water. Their design is critical to ensure structural integrity and safety. This research aims to provide a comprehensive stress and strain analysis of a typical spherical tank, focusing on the hoop and meridian stresses, and their distribution across the tank’s geometry. A 3D finite element model of a spherical tank will be developed using commercial FEA software. The model will incorporate realistic material properties (e.g., steel alloy) and boundary conditions that simulate the support structure and internal fluid pressure. The analysis will consider both linear elastic and potentially non-linear material responses to explore the tank’s behavior under various operational and overpressure scenarios. The primary objectives of this study are as follows: (1) determine the maximum principal stresses and strains within the tank wall, (2) analyze the stress concentration at critical points, such as support connections and nozzle penetrations, and (3) validate the FEM results against classical analytical solutions for thin-walled spherical pressure vessels. The findings will provide valuable insights into the structural performance of these tanks, highlighting potential areas of concern and offering a robust numerical approach for design optimization and safety assessment. This research demonstrates the power and utility of FEM in engineering design, offering a more detailed and accurate analysis than traditional analytical methods.
The aluminum alloys (AA) are among the most utilized materials in engineering structures, which induces the need for careful investigation, testing, and possibilities for accurate simulation of the structure’s response. AA 5083-H111 specimens were used to investigate the possibility of employing a Phase-Field Damage Model (PFDM) for the simulation of AA structures’ behavior. The specimens were mechanically tested by uniaxial tensile loading tests. Based on the obtained results, the PFDM was employed with a von Mises plasticity model, implemented in the Finite Element Method software. The plasticity model was extended by modification of the hardening function defined in two-intervals: a linear hardening and a Simo-type hardening. An excellent superposition of the simulation and experimental force-displacement response was recorded. These findings suggest that the AA structures’ response can be successfully simulated in the elastic-plastic domain, as well as its failure by damage being controlled.
This paper presents the strain-smoothed element (SSE) method applied to the 4-node tetrahedral finite element. The unique characteristic of the SSE method represents constructing a smoothed strain field for the elements, rather than for the smoothing domains, whereby the constant strains of all adjacent elements are fully utilized for the strain smoothing of the target element. Consequently, a linear strain field within the 4-node tetrahedral finite element is constructed through four Gauss integration points. The method does not require any additional creation of the mesh, and a standard isoparametric formulation of the 4-node tetrahedral finite element is used to formulate it. A numerical example was used to demonstrate the stress prediction improvement achieved as regards the corrected element, as taken from Chaemin Lee and Phill-Seung Lee’s publication of the method itself, compared with the linear and quadratic tetrahedral finite elements, which are implemented within the PAK and Simcenter Nastran software packages. The numerical results show that stresses predicted by the strain-smoothed 4-node tetrahedral finite element are comparable to that of a 10-node tetrahedral finite element that incorporates an extrapolation process for the determination of nodal stress values.
Spherical tanks represent key infrastructure in the petrochemical industry, playing a vital role in the safe and efficient storage of a wide range of products. These products can range from highly volatile hydrocarbons such as liquefied petroleum gas (LPG) and liquefied natural gas (LNG) to various other chemicals essential for industrial processes. The very geometry of a sphere offers inherent advantages for such applications. Its uniform curvature allows for even distribution of internal pressure across the entire surface, making it an inherently strong and stable shape for containing pressurized fluids. This optimal stress distribution leads to the need for a thinner shell compared to other tank geometries for the same volume and pressure, potentially leading to material savings. Loads can arise from the internal pressure of the stored liquid, external factors such as wind and seismic activity, thermal gradients, and even localized loads at support points or connections. However, despite these advantages, spherical tanks are still susceptible to various external and internal loads that can cause stress and deformation.