Rapid disaster assessment is critical for public security and rescue. As a secondary disaster of large-scale meteorological disasters, power outages cause severe outcomes and thus need to be monitored efficiently and without being costly. Power outage detection from space-borne remote sensing imagery offers a broader coverage and is more temporally sensitive than ground-based surveys are. However, it is challenging to determine the affected area accurately and quantitatively evaluate its severity. Therefore, a new method is proposed to solve the above problems by building a power outage detection model (PODM) and drawing a power outage spatial distribution map (POSDM). This paper takes the winter storm Uri, of 2021, as the meteorological disaster background and Harris County, Texas, which was seriously affected, as the research object. The proposed method utilises the cloud-free VIIRS DNB nadir and close nadir images (<60 degrees) collected during the 3 months before and 15 days after Uri. The core idea beneath the proposed method is to compare the radiance difference in the affected area before and after the disaster, and a large difference in radiance indicates the happening of power outages. The raw radiance of night light measurement is first corrected to remove lunar and atmospheric effects to improve accuracy. Then, the maximum and minimum pixels in the target area of the image are considered outliers and iteratively eliminated until the standard deviation change before and after elimination is less than 1% to finalize the outlier removals. The case study results in Harris show that the PODM detects 28% of outages (including traffic area) compared to 17% of outages (living area only) reported by ground truth data, indicating general agreement with the proposed method.

The Sustainable Development Goals Science Satellite-1 (SDGSAT-1) Glimmer Imager for Urbanization (GIU) data is very sensitive to low radiation and capable of detecting weak light sources from vessels at night while significantly improving the spatial resolution compared to similar products. Most existing methods fail to use the relevant characteristics of vessels effectively, and it is difficult to deal with the complex shape of vessels in high-resolution Nighttime Light (NTL) data, resulting in unsatisfactory detection results. Considering the overall sparse distribution of vessels and the light source diffusion phenomenon, a novel vessel detection method is proposed in this paper, utilizing the high spatial resolution of the SDGSAT-1. More specifically, noise separation is completed based on a local contrast-weighted RPCA. Then, artificial light sources are detected based on a density clustering algorithm, and an inter-cluster merging method is utilized to realize vessel detection further. We selected three research areas, namely, the Bohai Sea, the East China Sea, and the Gulf of Mexico, to establish a vessel dataset and applied the algorithm to the dataset. The results show that the total detection accuracy and the recall rate of the detection algorithm in our dataset are 96.84% and 96.67%, which is significantly better performance than other methods used for comparison in the experiment. The algorithm overcomes the dataset’s complex target shapes and noise conditions and achieves good results, which proves the applicability of the algorithm.

Detecting small targets in infrared images presents significant challenges due to their tiny size and complex backgrounds, making this task a hotspot for research. Traditional methods rely on assumption-based modeling and manual design, struggling to handle the variability of real-world scenarios. Although convolutional neural networks (CNNs) increase robustness to diverse scenes with a data-driven paradigm, many CNN-based methods are insufficient in capturing fine-grained details necessary for small targets and are less effective during multi-scale feature fusion. To overcome these challenges, we propose the novel Wide-scale Gated Fully Fusion Network (WGFFNet) in this article, which contributes to infrared small-target detection (IRSTD). WGFFNet uses a classic encoder–decoder structure, where the designed stepped fusion block (SFB) embedded in the feature extraction stage captures finer local context across multiple scales during encoding, and along the decoding path, the multi-level features are progressively integrated by a Fully Gated Interaction (FGI) Module to enhance feature representation. The inclusion of a boundary difference loss further optimizes the edge details of targets. We conducted comprehensive experiments on two public infrared small-target datasets: SIRST-V2 and IRSTD-1k. Quantitative and qualitative results demonstrate that our WGFFNet outperforms representative methods when considering various evaluation metrics together, achieving an improved detection performance and computational efficiency for detecting small targets in infrared images.

Field calibration is a feasible way to evaluate space-borne optical sensor observations via natural or artificial sites on Earth’s surface with the aid of synchronous surface and atmospheric characteristic data. Since field calibration is affected by the coupled effects of surface and atmospheric characteristics, the single calibration results acquired under different surface and atmospheric conditions have different biases and different uncertainties, making it difficult to determine the consistency of these multiple calibration results. In view of this, by assuming that the radiometric performance is invariant during field calibration and the calibration samples are independent of each other, the surface–atmosphere invariant Key Comparison Reference Value (KCRV) is essentially derived from various calibration results. As the number of calibration samples increases, the uncertainty in the KCRV should decrease, and the KCRV should approach the “true” value. This paper addresses a novel method for estimating a weighted average value from multiple calibration results that can be used to compare each calibration result, and this value is accepted as the KCRV. Furthermore, this method is preliminarily applied to the field calibration of the Multispectral Instrument (MSI) onboard the Sentinel-2B satellite via the desert target at the Baotou site, China. After employing a chi-squared test to verify that 12 calibration samples are independent from each other, the KCRV of the 12 calibration samples at the Baotou site is derived, which exhibits much lower uncertainty than a single sample. The results show that the KCRVs of the relative differences between the simulated and observed at-sensor reflectance are 3.75%, 5.11%, 6.09%, and 5.03% for the four bands of Sentinel-2B/MSI, respectively, and the corresponding uncertainties are 1.84%, 1.87%, 1.90%, and 1.93%. It is noted that the KCRV uncertainty obtained with only 12 calibration samples is reduced significantly, and in the future, more samples in other instrumented sites will be used to validate this method thoroughly.

Nighttime PM_2.5 detection by remote sensing can expand understanding of PM_2.5 spatiotemporal patterns due to wider coverage compared to ground monitors and by supplementing traditional daytime detection. However, using remote sensing data to invert PM_2.5 at night is still challenging. Compared with daytime detection, which operates on sunlight, nighttime detection operates on much weaker moonlight and artificial light sources, complicating signal extraction. Moreover, as the attempts to sense PM_2.5 remotely using satellite data are relatively recent, the existing nighttime models are still not mature, overlooking many important factors such as stray light, seasonality in meteorological effects, and observation angle. This paper attempts to improve the accuracy of nighttime PM_2.5 detection by proposing an inversion model that takes these factors into consideration. The Visible Infrared Imaging Radiometer Suite/Day/Night Band (VIIRS/DNB) on board the polar-orbiting Suomi National Polar-orbiting Partnership (Suomi NPP) and National Oceanic Atmospheric Administration-20 (NOAA-20) was used to establish a nighttime PM_2.5 inversion model in the Beijing area from 1 March 2018 to 28 February 2019. The model was designed by first studying the effects of these factors through a stepwise regression, then building a multivariate regression model to compensate for these effects. The results showed that the impact of satellite viewing zenith angle (VZA) was strongest, followed by seasonality and moonlight. Total accuracy was measured using correlation coefficient (R) compared to ground measurements, achieving 0.87 over the urban area and 0.74 over the suburbs. Specifically, the proposed method works efficiently at subsatellite points, which in this case correspond to VZA from 0 and 5°. In spring, summer, autumn, and winter, the R reached 0.95, 0.93, 0.94, and 0.97 at subsatellite points in the urban area, while it was 0.88, 0.82, 0.85, and 0.77 in the suburbs.

Cultivated land is a vital resource that underpins human survival and sustainable social development. With the widespread use of high-resolution remote sensing imagery, conventional change detection methods often suffer from limited accuracy due to pseudo-changes and insufficient feature representation when dealing with complex land structures and significant seasonal variations. To address the challenges of representing multi-scale structures, mitigating pseudo-change interference, and accurately delineating boundaries in cultivated land change detection, this study proposes a diffusion-guided change detection network—FarmChanger. The network is designed based on the principles of adaptive feature extraction and diffusion-inspired feature refinement. These components are further integrated through cross-feature guidance to enhance spatial details, forming an end-to-end detection framework. Comprehensive evaluations on the CLCD and Peixian benchmark datasets demonstrate that FarmChanger achieves comparable or superior performance to mainstream models across multiple evaluation metrics, verifying its high accuracy and robustness in cultivated land dynamic monitoring tasks.