The field of visible light communications (VLC) has gained significant interest over the last decade, in both fibre and free-space embodiments. In fibre systems, the availability of low cost polymer optical fibre (POF) that is compatible with visible data communications has been a key enabler. In free-space applications, the availability of hundreds of THz of the unregulated spectrum makes VLC attractive for wireless communications. This paper provides an overview of the recent developments in VLC systems based on gallium nitride (GaN) light-emitting diodes (LEDs), covering aspects from sources to systems. The state-of-the-art technology enabling bandwidth of GaN LEDs in the range of >400 MHz is explored. Furthermore, advances in key technologies, including advanced modulation, equalisation, and multiplexing that have enabled free-space VLC data rates beyond 10 Gb s −1 are also outlined.
LED-based visible light communications can provide high data rates to users. This can be further increased by the use of wavelength division multiplexing using the different colours required to generate white light to transmit different data streams. In this paper, a trichromatic approach is described and the influence of colour combination on achievable data rate is analysed. A demonstration of LED-based communications which achieves a data rate of >10 Gb/s by using a rate adaptive orthogonal-frequency-division-multiplexing scheme is also reported.
28 February 2018 in Journal of Lightwave Technology
Visible light communications is an alternative method of indoor wireless communications that requires sensitive receivers. Ideally, single photon avalanche detectors (SPADs) could be used to create more sensitive receivers. However, the dead time, finite output pulse width, and photon detection efficiency of existing SPAD arrays limit their sensitivity and bandwidth. In this paper, an accurate equation for the impact of dead time on the sensitivity of a SPAD array is presented. In addition, the impact of the width of the output pulses on the on-off keying data rate is investigated. Finally, a comparison between receivers containing an avalanche photo-diode (APD) and a large array of SPADs shows that although the receiver containing the SPAD is more sensitive in the dark, the APD-based receiver is more sensitive in a normal operating condition. However, the models that predict the performance of both receivers suggest that newer SPAD arrays will enable significant improvements in receiver sensitivity.
A silicon photomultiplier (SiPM) could be used to create visible light communications receivers whose sensitivity is determined by shot-noise. However, its finite output pulse width will limit its bandwidth and its recovery time and dark count rate could limit its sensitivity. In this paper, a method of accurately determining the signal levels needed to transmit data in a shot-noise limited system using PAM is described. In addition, a method of estimating the additional power needed to use equalisation to overcome inter-symbol interference caused by the finite output pulse width of SiPMs is described. The best way to achieve more than 1 Gbps with this type of receiver and how to select the best available SiPM as a receiver are then discussed.
The limited bandwidth of white light emitting diode (LED) limits the achievable data rate in a visible light communication (VLC) system. A number of techniques including multiple-input-multiple-output (MIMO) system are investigated to improvements the data rate. The high-speed optical MIMO system suffers from both spatial and temporal cross-talks. Spatial cross-talk is often compensated by MIMO decoding algorithm while temporal cross-talk is mitigated using an equalizer. However, the LEDs has a non-linear transfer function and the performance of linear equalizers are limited. In this paper, we propose a joint spatial and temporal equalization using an artificial neural network (ANN) for a MIMO-VLC system. We demonstrate using a practical imaging/non-imaging optical MIMO link that the ANN-based joint equalization outperforms the joint equalization using a traditional decision feedback as ANN is able to compensate the non-linear transfer function as well as cross-talk.
In this work we report the design and implementation of a very high speed retro-reflective free space communication system between a ground station and a commercial unmanned aerial vehicle (UAV). The system uses a pixelated electro-absorption modulator (EAM) modulating retro-reflector (MRR) to establish a data link operating at 500 Mbps at a range of 560 m and a bit error rate (BER) of 7.6·10 −4 . The MRR provides an effective aperture of 11 mm and full field of view (FFOV) of 6.4°. To the best of our knowledge, this is the fastest demonstration of an outdoor link of this type. In this paper the design and implementation of the system is described, as well as results from experimental trials.