Due to its manufacturing and size tailoring ease, porous anodic alumina (PAA) templates are an elegant physical-chemical nanopatterning approach and an emergent alternative to more sophisticated and expensive methods currently used in nanofabrication. In this review, we will describe the ground work on the fabrication methods of PAA membranes and PAA-based nanostructures. We will present the specificities of the electrochemical growth processes of multifunctional nanomaterials with diversified shapes (e.g., nanowires and nanotubes), and the fabrication techniques used to grow ordered nanohole arrays. We will then focus on the fabrication, properties and applications of magnetic nanostructures grown on PAA and illustrate their dependence on internal (diameter, interpore distance, length, composition) and external (temperature and applied magnetic field intensity and direction) parameters. Finally, the most outstanding experimental findings on PAA-grown nanostructures and their trends for technological applications (sensors, energy harvesting, metamaterials, and biotechnology) will be addressed.

Ordered arrays of CoxNi1$-${}x nanowires (0<x<1) were fabricated by a template-assisted method using electrodeposition into anodic aluminum oxide membranes. Tuning of the Co-alloy composition by changing the Ni content enables control of the effective anisotropy axis, which is determined by the balance between the hcp and fcc magnetocrystalline and shape anisotropies. We report on the nanowires' structural and magnetic properties (e.g., hysteresis curves and their parameters as well as first-order reversal curve analysis), paying particular attention to their angular dependence. It is confirmed that the crystal phase of nanowires with length 2.5 $\mu${}m and diameter 35 nm shifts from hcp to fcc as the Ni content increases. That results in a significant modification of the magnetization process and, accordingly, of the magnetic properties of the array. Analytical calculations of the angular dependence of the coercivity allow us to confirm that the magnetization reversal is mostly ascribed to the propagation of a transverse domain wall. Fitting of the experiment to these calculations indicates the presence of a transverse crystalline anisotropy (ascribed to the hcp phase) in Co wires, while this changes to an axial anisotropy (fcc phase) as the Ni content increases.

Ultrasensitive magnetic field sensors envisaged for applications on biomedical imaging require the detection of low-intensity and low-frequency signals. Therefore linear magnetic sensors with enhanced sensitivity low noise levels and improved field detection at low operating frequencies are necessary. Suitable devices can be designed using magnetoresistive sensors, with room temperature operation, adjustable detected field range, CMOS compatibility and cost-effective production. The advent of spintronics set the path to the technological revolution boosted by the storage industry, in particular by the development of read heads using magnetoresistive devices. New multilayered structures were engineered to yield devices with linear output. We present a detailed study of the key factors influencing MR sensor performance (materials, geometries and layout strategies) with focus on different linearization strategies available. Furthermore strategies to improve sensor detection levels are also addressed with best reported values of ∼40 pT/√Hz at 30 Hz, representing a step forward the low field detection at room temperature.

Magnetoresistive (MR) sensors have been successfully applied in many technologies, in particular readout electronics and smart systems for multiple signal addressing and readout. When single sensors are used, the requirements relate to spatial resolution and localized field sources. The integration of MR sensors in adaptable media (e.g. flexible, stretchable substrates) offers the possibility to merge the magnetic detection with mechanical functionalities. In addition, the precision of a micrometric needle can benefit greatly from the integration of MR sensors with submicrometric resolution. In this paper, we demonstrate through several detailed examples how advanced MR sensors can be integrated with the systems described above, and also with microfluidic technologies. Here, the challenges of handling liquids over a chip combine with those for miniaturization of microelectronics for MR readout. However, when these are overcome, the result is an integrated system with added functionalities, capable of answering the demand in biomedicine and biochemistry for lab-on-a-chip devices.

Investigation of the effect of Ti surface roughness on the formation, organization, hexagonal arrangement and length of TiO₂NTs.