Recent advances in aircraft materials and their manufacturing technologies have enabled progressive growth in innovative materials such as composites. Al-based, Mg-based, Ti-based alloys, ceramic-based, and polymer-based composites have been developed for the aerospace industry with outstanding properties. However, these materials still have some limitations such as insufficient mechanical properties, stress corrosion cracking, fretting wear, and corrosion. Subsequently, extensive studies have been conducted to develop aerospace materials that possess superior mechanical performance and are corrosion-resistant. Such materials can improve the performance as well as the life cycle cost. This review introduces the recent advancements in the development of composites for aircraft applications. Then it focuses on the studies conducted on composite materials developed for aircraft structures, followed by various fabrication techniques and then their applications in the aircraft industry. Finally, it summarizes the efforts made by the researchers so far and the challenges faced by them, followed by the future trends in aircraft materials.

In the last three decades, smart materials have become popular. The piezoelectric materials have shown key characteristics for engineering applications, such as in sensors and actuators for industrial use. Because of their excellent mechanical-to-electrical and vice versa energy conversion properties, piezoelectric materials with high piezoelectric charge and voltage coefficient have been tested in renewable energy applications. The fundamental component of the energy harvester is the piezoelectric material, which, when subjected to mechanical vibrations or applied stress, induces the displaced ions in the material and results in a net electric charge due to the dipole moment of the unit cell. This phenomenon builds an electric potential across the material. In this review article, a detailed study focused on the piezoelectric energy harvesters (PEH’s) is reported. In addition, the fundamental idea about piezoelectric materials, along with their modeling for various applications, are detailed systematically. Then a summary of previous studies based on PEH’s other applications is listed, considering the technical aspects and methodologies. A discussion has been provided as a critical review of current challenges in this field. As a result, this review can provide a guideline for the scholars who want to use PEH’s for their research.

With the breadth of applications and analysis performed over the last few decades, it would not be an exaggeration to call piezoelectric materials “the top of the crop” of smart materials. Piezoelectric materials have emerged as the most researched materials for practical applications among the numerous smart materials. They owe it to a few main reasons, including low cost, high bandwidth of service, availability in a variety of formats, and ease of handling and execution. Several authors have used piezoelectric materials as sensors and actuators to effectively control structural vibrations, noise, and active control, as well as for structural health monitoring, over the last three decades. These studies cover a wide range of engineering disciplines, from vast space systems to aerospace, automotive, civil, and biomedical engineering. Therefore, in this review, a study has been reported on piezoelectric materials and their advantages in engineering fields with fundamental modeling and applications. Next, the new approaches and hypotheses suggested by different scholars are also explored for control/repair methods and the structural health monitoring of engineering structures. Lastly, the challenges and opportunities has been discussed based on the exhaustive literature studies for future work. As a result, this review can serve as a guideline for the researchers who want to use piezoelectric materials for engineering structures.

Metal foams possess remarkable properties, such as lightweight, high compressive strength, lower specific weight, high stiffness, and high energy absorption. These properties make them highly desirable for many engineering applications, including lightweight materials, energy-absorption devices for aerospace and automotive industries, etc. For such potential applications, it is essential to understand the mechanical behaviour of these foams. Producing metal foams is a highly challenging task due to the coexistence of solid, liquid, and gaseous phases at different temperatures. Although numerous techniques are available for producing metal foams, fabricating foamed metal still suffers from imperfections and inconsistencies. Thus, a good understanding of various processing techniques and properties of the resulting foams is essential to improve the foam quality. This review discussed the types of metal foams available in the market and their properties, providing an overview of the production techniques involved and the contribution of metal foams to various applications. This review also discussed the challenges in foam fabrications and proposed several solutions to address these problems.

The present study aims to develop a biodegradable polymer blend that is environmentally friendly and has comparable tensile and thermal properties with synthetic plastics. In this work, microcrystalline cellulose (MCC) extracted from bamboo-chips-reinforced poly (lactic acid) (PLA) and poly (butylene succinate) (PBS) blend composites were fabricated by melt-mixing at 180 °C and then hot pressing at 180 °C. PBS and MCC (0.5, 1, 1.5 wt%) were added to improve the brittle nature of PLA. Field emission scanning electron microscopy (FESEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscope (FTIR), thermogravimetric analysis (TGA), differential thermogravimetry (DTG), differential scanning calorimetry (DSC)), and universal testing machine were used to analyze morphology, crystallinity, physiochemical, thermal, and tensile properties, respectively. The thermal stability of the PLA-PBS blends enhanced on addition of MCC up to 1wt % due to their uniform dispersion in the polymer matrix. Tensile properties declined on addition of PBS and increased with MCC above (0.5 wt%) however except elongation at break increased on addition of PBS then decreased insignificantly on addition of MCC. Thus, PBS and MCC addition in PLA matrix decreases the brittleness, making it a potential contender that could be considered to replace plastics that are used for food packaging.