The AnyBody Modeling System™ (AMS) is a musculoskeletal software simulation solution using inverse dynamics analysis. It enables the determination of muscle and joint forces for a given bodily motion. The recording of the individual movement and the transfer into the AMS is a complex and protracted process. Researches indicated that the contactless, visual Leap Motion Controller (LMC) provides clinically meaningful motion data for hand tracking. Therefore, the aim of this study was to integrate the LMC hand motion data into the AMS in order to improve the process of recording a hand movement. A Python-based interface between the LMC and the AMS, termed ROSE Motion, was developed. This solution records and saves the data of the movement as Biovision Hierarchy (BVH) data and AnyScript vector files that are imported into the AMS simulation. Setting simulation parameters, initiating the calculation automatically, and fetching results is implemented by using the AnyPyTools library from AnyBody. The proposed tool offers a rapid and easy-to-use recording solution for elbow, hand, and finger movements. Features include animation, cutting/editing, exporting the motion, and remote controlling the AMS for the analysis and presentation of musculoskeletal simulation results. Comparing the motion tracking results with previous studies, covering problems when using the LMC limit the correctness of the motion data. However, fast experimental setup and intuitive and rapid motion data editing strengthen the use of marker less systems as the herein presented compared to marker based motion capturing.
The climate impact of aviation can be reduced using powertrains based on hydrogen fuel cells and batteries. Combining both technologies in a direct-hybrid without a DC/DC converter is a promising approach for light-weight systems. Depending on the power demand, both the fuel cell and battery are used to provide power or only the fuel cell is connected to the powertrain. The system voltage in a direct-hybrid is determined by the fuel cell and battery, but the performance of fuel cells is affected by low-ambient pressure at high altitudes and the battery voltage is affected by state of charge and discharge rate. Taking this into account, the presented work demonstrates how a direct-hybrid system must be designed based on a scaled mission profile of a 40-seater aircraft. The fuel cell and battery are configured and sized according to the power demand in different flight phases while considering voltage limits given by the powertrain. The energy requirement from the fuel cell and the battery is calculated for a flight based on a realistic mission profile and different battery and fuel cell configurations are evaluated. By optimizing the battery and fuel cell size, the energy required from the battery was reduced by 57% and the total weight of the fuel cell and battery was reduced by 11%.
Hybrid electric aircraft with a powertrain based on fuel cells and batteries can reduce climate-active emissions in aviation. In a direct hybrid powertrain, the fuel cell and the battery are connected in parallel, without a DC/DC converter balancing their voltage levels. Switches make it possible to select different operational modes (fuel cell only, hybrid or battery charging) depending on the power demand during different flight phases. To exploit the high specific energy of hydrogen, the system should change from Hybrid Mode during take-off to Fuel Cell Mode in cruise. During descent, the battery can be charged if Charging Mode is selected. To avoid voltage and current peaks and consequent damage to components when switching between modes, certain conditions must be fulfilled. Those switching conditions were defined, and switching procedures for changing from one mode to the other during flight were developed and tested in a lab system. In a direct hybrid, the system voltage depends on the required power. When switching from Hybrid Mode to Fuel Cell Mode, a short reduction in power of 65% is necessary for the examined system to meet the switching requirements. It is also shown how this power loss can be reduced to 25% by distributed propulsion with a second powertrain or even eliminated by a change in the hybrid ratio.