The rationale of polarimetric optimization techniques is to enhance the phase quality of the interferograms by combining adequately the different polarization channels available to produce an improved one. Different approaches have been proposed for polarimetric persistent scatterer interferometry (PolPSI). They range from the simple and computationally efficient BEST, where, for each pixel, the polarimetric channel with the best response in terms of phase quality is selected, to those with high-computational burden like the equal scattering mechanism (ESM) and the suboptimum scattering mechanism (SOM). BEST is fast and simple, but it does not fully exploit the potentials of polarimetry. On the other side, ESM explores all the space of solutions and finds the optimal one but with a very high-computational burden. A new PolPSI algorithm, named coherency matrix decomposition-based PolPSI (CMD-PolPSI), is proposed to achieve a compromise between phase optimization and computational cost. Its core idea is utilizing the polarimetric synthetic aperture radar (PolSAR) coherency matrix decomposition to determine the optimal polarization channel for each pixel. Three different PolSAR image sets of both full- (Barcelona) and dual-polarization (Murcia and Mexico City) are used to evaluate the performance of CMD-PolPSI. The results show that CMD-PolPSI presents better optimization results than the BEST method by using either DA or temporal mean coherence as phase quality metrics. Compared with the ESM algorithm, CMD-PolPSI is 255 times faster but its performance is not optimal. The influence of the number of available polarization channels and pixel's resolutions on the CMD-PolPSI performance is also discussed.

Pixel selection is a crucial step of all advanced Differential Interferometric Synthetic Aperture Radar (DInSAR) techniques that have a direct impact on the quality of the final DInSAR products. In this paper, a full-resolution phase quality estimator, i.e., the temporal phase coherence (TPC), is proposed for DInSAR pixel selection. The method is able to work with both distributed scatterers (DSs) and permanent scatterers (PSs). The influence of different neighboring window sizes and types of interferograms combinations [both the single-master (SM) and the multi-master (MM)] on TPC has been studied. The relationship between TPC and phase standard deviation (STD) of the selected pixels has also been derived. Together with the classical coherence and amplitude dispersion methods, the TPC pixel selection algorithm has been tested on 37 VV polarization Radarsat-2 images of Barcelona Airport. Results show the feasibility and effectiveness of TPC pixel selection algorithm. Besides obvious improvements in the number of selected pixels, the new method shows some other advantages comparing with the other classical two. The proposed pixel selection algorithm, which presents an affordable computational cost, is easy to be implemented and incorporated into any advanced DInSAR processing chain for high-quality pixels' identification.

Underground coal fires have become a worldwide disaster, which brings serious environmental pollution and massive energy waste. Xinjiang is one of the regions that is seriously affected by the underground coal fires. After years of extinguishing, the underground coal fire areas in Xinjiang have not been significantly reduced yet. To extinguish underground coal fires, it is critical to identify and monitor them. Recently, remote sensing technologies have been showing great potential in coal fires’ identification and monitoring. The thermal infrared technology is usually used to detect thermal anomalies in coal fire areas, and the Differential Synthetic Aperture Radar Interferometry (DInSAR) technology for the detection of coal fires related to ground subsidence. However, non-coal fire thermal anomalies caused by ground objects with low specific heat capacity, and surface subsidence caused by mining and crustal activities have seriously affected the detection accuracy of coal fire areas. To improve coal fires’ detection accuracy by using remote sensing technologies, this study firstly obtains temperature, normalized difference vegetation index (NDVI), and subsidence information based on Landsat8 and Sentinel-1 data, respectively. Then, a multi-source information strength and weakness constraint method (SWCM) is proposed for coal fire identification and analysis. The results show that the proposed SWCM has the highest coal fire identification accuracy among the employed methods. Moreover, it can significantly reduce the commission and omission error caused by non-coal fire-related thermal anomalies and subsidence. Specifically, the commission error is reduced by 70.4% on average, and the omission error is reduced by 30.6%. Based on the results, the spatio-temporal change characteristics of the coal fire areas have been obtained. In addition, it is found that there is a significant negative correlation between the time-series temperature and the subsidence rate of the coal fire areas (R² reaches 0.82), which indicates the feasibility of using both temperature and subsidence to identify and monitor underground coal fires.

The collapse of open-pit coal mine slopes is a kind of severe geological hazard that may cause resource waste, economic loss, and casualties. On 22 February 2023, a large-scale collapse occurred at the Xinjing Open-Pit Mine in Inner Mongolia, China, leading to the loss of 53 lives. Thus, monitoring of the slope stability is important for preventing similar potential damage. It is difficult to fully obtain the temporal and spatial information of the whole mining area using conventional ground monitoring technologies. Therefore, in this study, multi-source remote sensing methods, combined with local geological conditions, are employed to monitor the open-pit mine and analyze the causes of the accident. Firstly, based on GF-2 data, remote sensing interpretation methods are used to locate and analyze the collapse area. The results indicate that high-resolution remote sensing can delineate the collapse boundary, supporting the post-disaster rescue. Subsequently, multi-temporal Radarsat-2 and Sentinel-1A satellite data, covering the period from mining to collapse, are integrated with D-InSAR and DS-InSAR technologies to monitor the deformation of both the collapse areas and the potential risk to dump slopes. The D-InSAR result suggests that high-intensity open-pit mining may be the dominant factor affecting deformation. Furthermore, the boundary between the collapse trailing edge and the non-collapse area could be found in the DS-InSAR result. Moreover, various data sources, including DEM and geological data, are combined to analyze the causes and trends of the deformation. The results suggest that the dump slopes are stable. Meanwhile, the deformation trends of the collapse slope indicate that there may be faults or joint surfaces of the collapse trailing edge boundary. The slope angle exceeding the designed value during the mining is the main cause of the collapse. In addition, the thawing of soil moisture caused by the increase in temperature and the reduction in the mechanical properties of the rock and soil due to underground voids and coal fires also contributed to the accident. This study demonstrates that multi-source remote sensing technologies can quickly and accurately identify potential high-risk areas, which is of great significance for pre-disaster warning and post-disaster rescue.

Landslides are one of the most common and dangerous threats in the world that generate considerable damage and economic losses. An efficient landslide monitoring tool is the Differential Synthetic Aperture Radar Interferometry (DInSAR) or Persistent Scatter Interferometry (PSI). However, landslides are usually located in mountainous areas and the area of interest can be partially or even heavily vegetated. The inherent temporal decorrelation that dramatically reduces the number of Persistent Scatters (PSs) of the scene limits in practice the application of this technique. Thus, it is crucial to be able to detect as much PSs as possible that can be usually embedded in decorrelated areas. High resolution imagery combined with efficient pixel selection methods can make possible the application of DInSAR techniques in landslide monitoring. In this paper, different strategies to identify PS Candidates (PSCs) have been employed together with 32 super high-spatial resolution (SHR) TerraSAR-X (TSX) images, staring-spotlight mode, to monitor the Canillo landslide (Andorra). The results show that advanced PSI strategies (i.e., the temporal sub-look coherence (TSC) and temporal phase coherence (TPC) methods) are able to obtain much more valid PSs than the classical amplitude dispersion ($D_A$) method. In addition, the TPC method presents the best performance among all three full-resolution strategies employed. The SHR TSX data allows for obtaining much higher densities of PSs compared with a lower-spatial resolution SAR data set (Sentinel-1A in this study). Thanks to the huge amount of valid PSs obtained by the TPC method with SHR TSX images, the complexity of the structure of the Canillo landslide has been highlighted and three different slide units have been identified. The results of this study indicate that the TPC approach together with SHR SAR images can be a powerful tool to characterize displacement rates and extension of complex landslides in challenging areas.

With the launch of the Sentinel-1 satellites, it becomes easy to obtain long time-series dual-pol (i.e., VV and VH channels) SAR images over most areas of the world. By combining the information from both VV and VH channels, the polarimetric persistent scatterer interferometry (PolPSI) techniques is supposed to achieve better ground deformation monitoring results than conventional PSI techniques (using only VV channel) with Sentinel-1 data. According to the quality metric used for polarimetric optimizations, the most commonly used PolPSI techniques can be categorized into three main categories. They are PolPSI-ADI (amplitude dispersion index as the phase quality metric), PolPSI-COH (coherence as the phase quality metric), and PolPSI-AOS (taking adaptive optimization strategies). Different categories of PolPSI techniques are suitable for different study areas and with different performances. However, the study that simultaneously applies all the three types of PolPSI techniques on Sentinel-1 PolSAR images is rare. Moreover, there has been little discussion about different characteristics of the three types of PolPSI techniques and how to use them with Sentinel-1 data. To this end, in this study, three data sets in China have been used to evaluate the three types of PolPSI techniques’ performances. Based on results obtained, the different characteristics of PolPSI techniques have been discussed. The results show that all three PolPSI techniques can improve the phase quality of interferograms. Thus, more qualified pixels can be used for ground deformation estimation by PolPSI methods with respect to the PSI technique. Specifically, this pixel density improvement is 50%, 12%, and 348% for the PolPSI-ADI, PolPSI-COH, and POlPSI-AOS, respectively. PolPSI-ADI is the most efficient method, and it is the first choice for the area with abundant deterministic scatterers (e.g., urban areas). Benefitting from its adaptive optimization strategy, PolPSI-AOS has the best performances at the price of highest computation cost, which is suitable for rural area applications. On the other hand, limited by the medium resolution of Sentinel-1 PolSAR images, PolPSI-COH’s improvement with respect to conventional PSI is relatively insignificant.