Prior to the application of any persistent scatterer interferometry (PSI) technique for the monitoring of terrain displacement phenomena, an adequate pixel selection must be carried out in order to prevent the inclusion of noisy pixels in the processing. The rationale is to detect the so-called persistent scatterers, which are characterized by preserving their phase quality along the multi-temporal set of synthetic aperture radar (SAR) images available. Two criteria are mainly available for the estimation of pixels’ phase quality, i.e., the coherence stability and the amplitude dispersion or permanent scatterers (PS) approach. The coherence stability method allows an accurate estimation of the phase statistics, even when a reduced number of SAR acquisitions is available. Unfortunately, it requires the multi-looking of data during the coherence estimation, leading to a spatial resolution loss in the final results. In contrast, the PS approach works at full-resolution, but it demands a larger number of SAR images to be reliable, typically more than 20. There is hence a clear limitation when a full-resolution PSI processing is to be carried out and the number of acquisitions available is small. In this context, a novel pixel selection method based on exploiting the spectral properties of point-like scatterers, referred to as temporal sublook coherence (TSC), has been recently proposed. This paper seeks to demonstrate the advantages of employing PSI techniques by means of TSC on both orbital and ground-based SAR (GB-SAR) data when the number of images available is small (10 images in the work presented). The displacement maps retrieved through the proposed technique are compared, in terms of pixel density and phase quality, with traditional criteria. Two X-band datasets composed of 10 sliding spotlight TerraSAR-X images and 10 GB-SAR images, respectively, over the landslide of El Forn de Canillo (Andorran Pyrenees), are employed for this study. For both datasets, the TSC technique has showed an excellent performance compared with traditional techniques, achieving up to a four-fold increase in the number of persistent scatters detected, compared with the coherence stability approach, and a similar density compared with the PS approach, but free of outliers.

Landslides are one of the most common and dangerous threats in the world that generate considerable damage and economic losses. An efficient landslide monitoring tool is the Differential Synthetic Aperture Radar Interferometry (DInSAR) or Persistent Scatter Interferometry (PSI). However, landslides are usually located in mountainous areas and the area of interest can be partially or even heavily vegetated. The inherent temporal decorrelation that dramatically reduces the number of Persistent Scatters (PSs) of the scene limits in practice the application of this technique. Thus, it is crucial to be able to detect as much PSs as possible that can be usually embedded in decorrelated areas. High resolution imagery combined with efficient pixel selection methods can make possible the application of DInSAR techniques in landslide monitoring. In this paper, different strategies to identify PS Candidates (PSCs) have been employed together with 32 super high-spatial resolution (SHR) TerraSAR-X (TSX) images, staring-spotlight mode, to monitor the Canillo landslide (Andorra). The results show that advanced PSI strategies (i.e., the temporal sub-look coherence (TSC) and temporal phase coherence (TPC) methods) are able to obtain much more valid PSs than the classical amplitude dispersion ($D_A$) method. In addition, the TPC method presents the best performance among all three full-resolution strategies employed. The SHR TSX data allows for obtaining much higher densities of PSs compared with a lower-spatial resolution SAR data set (Sentinel-1A in this study). Thanks to the huge amount of valid PSs obtained by the TPC method with SHR TSX images, the complexity of the structure of the Canillo landslide has been highlighted and three different slide units have been identified. The results of this study indicate that the TPC approach together with SHR SAR images can be a powerful tool to characterize displacement rates and extension of complex landslides in challenging areas.

Urban subsidence and landslides are among the greatest hazards for people and infrastructure safety and they require an especial attention to reduce their associated risks. In this framework, ground-based synthetic aperture radar (SAR) interferometry (GB-InSAR) represents a cost-effective solution for the precise monitoring of displacements. This work presents the application of GB-InSAR techniques, particularly with the RiskSAR sensor and its processing chain developed by the Remote Sensing Laboratory (RSLab) of the Universitat Politècnica de Catalunya (UPC), for the monitoring of two different types of ground displacement. An example of urban subsidence monitoring over the village of Sallent, northeastern of Spain, and an example of landslide monitoring in El Forn de Canillo, located in the Andorran Pyrenees, are presented. In this framework, the key processing particularities for each case are deeply analyzed and discussed. The linear displacement maps and time series for both scenarios are showed and compared with in-field data. For the study, fully polarimetric data acquired at X-band with a zero-baseline configuration are employed in both scenarios. The displacement results obtained demonstrate the capabilities of GB-SAR sensors for the precise monitoring of ground displacement phenomena.

This work addresses the suitability of using X-band Synthetic Aperture Radar (SAR) data for operational geotechnical monitoring of site scale slow moving landslides, affecting urban areas and infrastructures. The scale of these studies requires high resolution data. We propose a procedure for the practical use of SAR data in geotechnical landslides campaigns, that includes an appropriate dataset selection taking into account the scenario characteristics, a visibility analysis, and considerations when comparing advanced differential SAR interferometry (A-DInSAR) results with other monitoring techniques. We have determined that Sentinel-2 satellite optical images are suited for performing high resolution land cover classifications, which results in the achievement of qualitative visibility maps. We also concluded that A-DInSAR is a very powerful and versatile tool for detailed scale landslide monitoring, although in combination with other instrumentation techniques.

In recent years, drone-based Synthetic Aperture Radar (SAR) systems have emerged as flexible and cost-efficient solutions for detecting changes in the Earth’s surface, retrieving topographic data, or detecting ground displacement processes in localized areas, among other applications. These systems offer a unique combination of short and versatile revisit times and flexible acquisition geometries that are not achievable with space-borne, airborne, or ground-based SAR sensors. However, due to platform limitations and flight stability issues, they also present significant challenges regarding instrument design and data processing, particularly when generating interferometric repeat-pass datasets. This paper demonstrates the feasibility of repeat-pass interferometry using a Ku-band drone-based SAR system. The system integrates a dual-channel Ku-band Frequency Modulated Continuous Wave (FMCW) radar with cross-track single-pass interferometric capabilities, mounted on a drone platform. The proposed repeat-pass interferometric processing chain leverages an accurate Digital Elevation Model (DEM), generated from the single-pass interferograms, to precisely coregister the entire stack of acquisitions, thereby producing repeat-pass interferograms free from residual motion errors. The results underscore the potential of this system and the processing chain proposed for generating multi-temporal repeat-pass stacks suitable for repeat-pass applications.

Accurate flight trajectory knowledge is crucial for airborne and drone-borne repeat-pass Synthetic Aperture Radar (SAR) interferometry. Given that Global Navigation Satellite System (GNSS) inaccuracies are comparable to typical radar wavelengths, especially at high-frequency bands (X-band and higher), estimating the Residual Motion Error (RME) is essential to ensure precise coregistration of Single-Look Complex (SLC) stacks and to generate high-quality repeat-pass interferograms. In this framework, traditional RME estimation techniques, such as the multisquint algorithm, often suffer performance degradation under large errors and high-decorrelation conditions, as they rely heavily on the quality of uncoregistered interferograms. To address this limitation, this paper introduces an enhanced version of the multisquint technique that solves the estimation of RME using a minimization strategy in the complex domain and uses the retrieved RMEs of the entire interferometric dataset to refine the estimates. This approach improves RME estimation robustness against large errors and decorrelation artifacts, particularly in high-frequency airborne and drone-borne SAR datasets. The proposed method is validated using a real dataset acquired with a Ku-band drone-borne SAR system, demonstrating significant improvements in coregistration accuracy. Quantitative evaluations based on interferometric coherence and phase fringe frequency metrics confirm its effectiveness, establishing the proposed refinement as a robust solution for high-precision interferometric applications.