Improving the antibacterial activity of biodegradable materials is crucial for combatting widespread drug-resistant bacteria and plastic pollutants. In this work, we studied polyaniline (PANI)-functionalized zinc oxide nanoparticles (ZnO NPs) to improve surface charges. A PANI-functionalized ZnO NP surface was prepared using a simple impregnation technique. The PANI functionalization of ZnO successfully increased the positive surface charge of the ZnO NPs. In addition, PANI-functionalized ZnO improved mechanical properties and thermal stability. Besides those properties, the water permeability of the bionanocomposite films was decreased due to their increased hydrophobicity. PANI-functionalized ZnO NPs were applied to thermoplastic starch (TPS) films for physical properties and antibacterial studies using Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The PANI-functionalized ZnO bionanocomposite films exhibited excellent antibacterial activity for both E. coli (76%) and S. aureus (72%). This result suggests that PANI-functionalized ZnO NPs can improve the antibacterial activity of TPS-based bionanocomposite films.

In this study, a comparative life cycle assessment of three different products with reusable and single-use packaging for fresh food distribution was conducted. For the reusable packaging, one utilized a vacuum insulation panel (VIP) box made of recycled polyethylene terephthalate (r-PET), while the other employed expanded polyethylene (EPE). For comparison, a disposable box made of widely used expanded polystyrene (EPS) was selected. We analyzed the environmental impacts of production, transportation, reprocessing (reused boxes), and disposal in 18 impact categories. As a result of analyzing the actual reuse of 300 rounds of fresh food, the cumulative global warming potential (GWP) values of the VIP and EPE box were 136.58 kg carbon dioxide (CO₂) eq and 281.72 kg CO₂ eq, respectively, 87% and 74% lower than those of the EPS box. Additionally, the GWP values were the same as those of the EPS boxes when the VIP and EPE boxes were reused 7 and 12 times, respectively. The best-case scenario was revealed when the reusable packaging with the r-PET VIP was compared with the EPE and EPS boxes. In conclusion, reusable packaging is expected to contribute to the reduction in the environmental burden and better suit global environmental requirements for sustainable food distribution and related industries. In addition, our findings can inform policy and industry decisions to promote more sustainable practices in the food industry, contributing to the advancement of sustainability in this field.

One of the key factors of supporting the rapidly expanding seafood product industry in terms of quality control is the utilization of active packaging materials. Microorganisms are primarily responsible for the perishability and rapid disintegration of seafood. The incorporation of an inorganic compound, such as silica-based diatomaceous earth (DE), and a metal oxide, such as zinc oxide (ZnO), is proposed to develop active packaging materials with excellent antibacterial activity, minimized fishy odor, and brittleness at subzero temperatures. The mechanical, morphological, and physicochemical properties of these materials were investigated. The results show that the addition of DE/ZnO improved the antibacterial activity of high-density polyethylene (HDPE) samples by up to approximately 95% against both gram-positive and -negative bacteria. Additionally, it enhanced the Izod strength and stability at subzero temperatures of the samples. The odor evaporation test revealed that trimethylamine can be minimized in proportion to increasing DE/ZnO composite concentration. As a result, the development of active packaging materials from DE/ZnO composites is an emerging polymeric packaging technology for seafood products, wherein packaging and seafood quality are linked.

This research developed a biodegradable absorbent pad using polybutylene adipate terephthalate (PBAT) and thermoplastic starch (TPS) films, combined with hairy basil (Ocimum basilicum) seed powder (HBP) to extend the shelf life of fresh pork during cold storage. To form the biocomposite film, PBAT was blended with TPS in ratios of 100:0, 90:10, 70:30, and 50:50. The PBAT:TPS ratio of 70:30 (PB7T3) was the most suitable in terms of mechanical properties and water permeation. Therefore, PB7T3 was selected to fabricate the absorbent pad for extending the shelf life of fresh pork during cold storage. For the storage test, 100 g of pork pieces was placed in PET trays (12 cm × 12 cm), each containing a different absorbent: the control (no pad), a commercial absorbent pad, and the PB7T3 absorbent pad. The pork samples were stored at 4 °C for 8 days and analyzed for color change, total plate count (TPC), total volatile basic nitrogen (TVB-N), pH, and drip loss on days 0, 2, 4, 6, and 8. The results indicated that the PB7T3 absorbent pad effectively extended the shelf life of fresh pork compared to the control, with no significant difference compared to the commercial absorbent pad made from plastic. This research opens new avenues for developing sustainable absorbent pads, contributing to reduced reliance on conventional non-biodegradable plastics.

The fisheries industry encounters distinct packaging challenges, including the need to protect perishable seafood from rapid spoilage caused by UV radiation while allowing for reuse. This study tackles these issues by introducing advanced high-density polyethylene (HDPE) composites enhanced with a UV stabilizer and inorganic fillers, such as diatomaceous earth/zinc oxide (DZ). Our investigation explores the transformative effects of weathering on these pioneering composites, evaluating shifts in mechanical, physical, thermal properties, and sub-zero temperature stability. Incorporating a UV stabilizer alongside DZ within the HDPE matrix significantly enhances mechanical performance and weathering resilience. These enhancements extend the longevity of seafood packaging while preserving product quality. Moreover, our findings reveal a substantial breakthrough in antimicrobial properties. The inclusion of DZ, with or without a UV stabilizer, results in an impressive up to 99% enhancement in antibacterial activity against both Gram-positive and Gram-negative bacteria. This discovery not only bolsters the protective attributes of HDPE packaging but also presents a compelling case for the development of active packaging materials derived from DE/ZnO composites. This study bridges the gap between packaging and seafood quality, introducing advanced polymeric packaging technology for seafood products. It highlights the mutually beneficial link between packaging improvements and ensuring seafood quality, meeting industry needs while promoting sustainability.

The colorimetric sensor array (CSA) is a simple, rapid, and cost-effective system widely used in food science to assess food quality by identifying undesirable volatile organic compounds. As a prospective alternative to conventional techniques such as total volatile basic nitrogen, peroxide value, and thiobarbituric acid reactive substance analysis, the CSA system has garnered significant attention. This study evaluated the quality of edible-coated food products using both conventional and CSA methods in order to demonstrate that the CSA approach is a feasible alternative to conventional methods. Boiled-dried anchovies (BDA) were selected as the model food product, and the sample’s quality was assessed as a function of storage temperature and incubation period using conventional techniques and the CSA system. The surface of BDA was coated with an edible alginate film to form the surface-modified food product. The conventional methods revealed that an increase in storage temperature and incubation time accelerated the lipid oxidation process, with the uncoated BDA undergoing lipid oxidation at a faster rate than the coated BDA. Utilizing multivariate statistical analysis, the CSA approach essentially yielded the same results. In addition, the partial least square regression technique revealed a strong correlation between the CSA system and conventional methods, indicating that the CSA system may be a feasible alternative to existing methods for evaluating the quality of food products with surface modifications.