15 January 2024 in IEEE Access
This paper introduces an optimal bi-objective optimization methodology customized for microgrid systems, encompassing economic, technological, and environmental considerations. The framework portrays the objectives of an intelligent microgrid, aiming to minimize operational costs, CO2 emissions, peak-to-average ratio (PAR), and energy consumption while concurrently enhancing user comfort (UC). A scheduled power allocation strategy is formulated to efficiently cater to the energy needs of residential loads. The stochastic nature of wind and solar resources is characterized by modeling wind speed and solar radiation intensity using a beta probability density function (PDF). The non-dominated sorting genetic algorithm II (NSGA-II) is employed to address optimization challenges. A decision-making process is implemented to select the optimal solution from the non-dominated alternatives. The study presents three scenarios illustrating the optimal operational values for various parameters and energy consumption, providing a comprehensive analysis of the proposed algorithm’s efficacy. Leveraging the NSGA-II algorithm, coupled with renewable energy resources and optimal energy storage system scheduling, yielded significant reductions in overall expenses, PAR, CO2 emissions, user discomfort, and energy consumption. MATLAB simulations were conducted to substantiate the efficacy of our proposed approach. The obtained results underscore the effectiveness and productivity of our devised NSGA-II-based approach. Notably, the proposed algorithm demonstrated a substantial reduction in electricity costs by 19.0%, peak-to-average ratio (PAR) by 30.7%, and carbon emissions by 21.7% in scenario-3, as evidenced by a comparative analysis with the unscheduled case.
28 December 2022 in IEEE Access
MMMohd Amrallah Bin Mustafa
Mohd Amrallah Bin Mustafa
Context: Denial-of-Service Attack countermeasure techniques (DoS A-CTs) evaluation is a multi-criteria decision-making (MCDM) problem based on different MPSoCs of IoT platform design, performance, and design overhead. Therefore, the Fermatean by fuzzy decision opinion score method (F-FDOSM) for prioritizing the powerful countermeasure technique against Denial-of-Service (DoS) attack is the best approach because it employs the most efficient MCDM ranking technique. Nonetheless, the FDOSM method needs to weigh the criteria before being submitted for the ranking process. In order to address this theoretical challenge, the Criteria-importance through inter-criteria correlation (CRITIC) technique can be applied as an effective MCDM weighting technique to offer an explicit weight for a set of criteria with no inconsistency based on the standard deviation, which uses correlation analysis to determine the relevance of each criterion. Objectives: This research proposes a Fermatean-FDOSM framework for evaluating DoS A-CTs in the context of MPSoCs-based IoT and CRITIC techniques to weight the criteria. Methods: The methodology is presented in three phases. Firstly, a proposed countermeasure techniques dataset was collected that included eighteen defense approaches (e.g., Sniffer, SeRA, and RLAN) based on thirteen criteria (e.g., size, power, latency, and effectiveness ... etc.). Then, the decision matrix was built based on an intersection of the countermeasure techniques as an alternative and MPSoC design and performance criteria. Then, the multi-criteria decision-making methods were integrated. The CRITIC method for criteria weighting was followed by the development of the Fermatean-FDOSM method for ranking. Results: (1) CRITIC weighting shows that MPSoC NoC Routing Algorithm (XY and YX) is the highest weight criterion, whereas latency (clock/cycle) is the less weight criterion. (2) The Fermatean-FDOSM-based group ranking shows that the Collision Point Router Detection (CPRD) countermeasure technique is the first-ranked alternative compared to the Secure Model Checkers (SMCs) approach. (3) The DoS A-CTs priority ranks were subjected to a systematic ranking that was confirmed by solid correlation results throughout thirteen criterion weight values. A comparison with recent studies confirmed the feasibility of the proposed framework. Conclusion: The results of this research are expected to provide a specific understanding and guide for those who want to engage in MPSoCs-based IoT and NoC communication security research with decision theory.
1 February 2023 in International Journal of Electrical and Computer Engineering (IJECE)
The 5G system-based cognitive radio network is promised to meet the requirements of huge data applications with spectrum. However, the M-ary effect on the detection has not been thoroughly investigated. In this paper, an M-ary of quadrature amplitude modulation detection system is studied. Many rates are used in this study 4, 16, 64, and 256 constellation points. The detection system is applied to cooperative spectrum sensing to enhance the performance of detection for various rates of M-ary with low signal-to-noise ratio (SNR). Further, three kinds of signals based 5G system are sensed: filtered-orthogonal frequency division multiplexing (F-OFDM), filter bank multi-carrier (FBMC), and universal filtered multi-carrier (UFMC). The best detection performance is obtained when the M-ary=4 and number of SUs=50 user, whereas the worst detection performance is obtained when the M-ary=256 and number of SUs=10 user, as revealed in the simulation results. In addition, the detection performance for the F-OFDM signal is better than that of UFMC and FBMC signals for SNR <0 dB.
1 September 2024 in International Journal of Advances in Applied Sciences
This paper is on a microcontroller-based camera controller with sound source localization (SSL). With the rising frequency of highway accidents in Malaysia, there is a pressing need for a reliable detection system. The current approach, involving fixed-angled cameras, necessitates constant human monitoring, proving inefficient. To address this, the study introduces a hybrid camera system incorporating a camera for image capture and a microphone to detect collision sounds. By integrating a pan-tilt (PT) camera controller driven by time difference of arrival (TDOA) inputs, the system can swiftly move toward accident locations. The TDOA method is employed to convert sound arrival time differences into camera angles. The accuracy of the PT camera's rotation angle was analyzed based on the original sound source angle. As a result, this project produced an automated highway monitoring camera system that uses sound SSL to detect car crash sounds on highways. Its PT feature will help cover a large highway area and eliminate blind spots to capture possible accident scenes. The average inaccuracy of the experimental test of the pan and tilt angle of the camera is 19 and 23%, respectively. The accuracy of the pan tilt angle can be increased by adding more analog acoustic sensors.