This paper proposes an all-in-one system for hyperloop that conducts propulsion, levitation, and guidance. Currently demand on high-speed long-distance transportation is increasing, so that hyperloop is getting attention and studied hard globally. Hyperloop is a new innovative transportation in which a levitated subsonic speed train travels through a vacuum cylindrical tube. Hyperloop needs functions of propulsion, levitation, and guidance for its service, and many devices are necessary for those functions. In the tube, a constrained space, many devices make the entire system complicated, and the size of the vehicle and tube are increased. Therefore, the costs of maintenance, manufacture, and construction are increased and control of each device becomes very difficult. But a non-symmetric double-sided linear induction motor (NSDLIM), the subject of this paper, is an all-in-one system that could conduct all functions. In this paper, the concept of NSDLIM was introduced and its possibility was suggested. Requirements of NSDLIM were investigated considering very high acceleration, velocity, and low air pressure. An NSDLIM model was designed and analyzed by using the finite-element method. Then, NSDLIM parameters that affect performance were investigated and adjusted to improve performance. The derived model performance was shown, and its possibility was considered.

This paper is a study on the application position of skew in order to reduce the cogging torque of a magnetic geared synchronous motor (MGM). The cogging torque affects the noise and vibration of the motor, so it should be reduced as much as possible. To solve this problem, a conventional permanent magnet (PM) synchronous motor is skewed to a PM. However, unlike other synchronous motors, the MGM has pole pieces (PPs), and a larger cogging torque is generated due to a larger reluctance difference. There have been few studies on the reduction of cogging torque of MGM, so it is essential to study the skew structure of MGM. Therefore, this paper has derived the optimum skew method by comparing and analyzing three models of MGM skewed to PM, PP, and PM and PP simultaneously.

This paper studies the output performance improvement of the spherical multi-degree-of-freedom (multi-DOF) motor. The multi-DOF motor is a motor that is designed to drive in multiple axes. Therefore, it is important that the shape of the motor should be fabricated to enable multi-axis driving when designing the multi-DOF motor. In addition, it is essential to consider the output density characteristics and stability characteristic analysis to reduce the volume of the multi-DOF motor and to operate of the motor in the stable range, respectively. In this paper, the structure and operating characteristics of the spherical multi-DOF motor with dual air gaps are described. In order to improve the output characteristics of the multi-DOF motor, characteristics analysis was performed according to the change of the number of the phases and pole pitch angles, and stability characteristic analysis for stable operation of the multi-DOF motor was performed.

According to International Electrotechnical Commission (IEC) 60034-1, in industrial applications not only efficiency but also power factors are important performance indexes. When comparing line motor to induction motor (IM), a line-start synchronous reluctance motor (LS-SynRM) has a high efficiency but a low power factor than that of IM. In this article, the analysis and design of LS-SynRM are carried out considering the rotor slot opening and bridges for improving the efficiency and power factor. The reference machine is selected with a 2.2 kW IM, and the performance of the reference model is analyzed based on finite element analysis (FEA). To analyze the effect of rotor slot opening and bridges, an optimal model of LS-SynRM is designed through a two-step design process. First, the design of rotor slot for synchronization is carried out, and second, the design of barriers using the response surface method (RSM) is carried out under the same conditions of the stator size of IM. Based on the basic model, the performances of LS-SynRM are analyzed according to the slot opening and bridges. Furthermore, the parametric analysis is carried out and the final model is designed considering the efficiency and power factor based on the design parameters. Finally, the final model is manufactured, and the experiment is carried out to verify the FEA result.

This paper describes a study on an design of IPMSM (Interior Permanent Magnet Synchronous Motor) for reliability of demagnetization characteristics-based rotor. The IPMSM in this paper is located at a lower part of a railway vehicle and has a totally enclosed type structure so heat does not circulate within it and its temperature rises high. In order to increase power density of the motor, a neodymium permanent magnet with high energy density is used. However, this neodymium permanent magnet has properties that demagnetization occurs at a high temperature or by a reverse magnetic field and that as a new demagnetization curve called a recoil line is drawn in the B-H characteristic curve, magnet becomes permanently demagnetized. This permanent demagnetization property decreases the torque characteristics of or power output of the motor, eventually making it impossible to drive the railway vehicle and also reducing its reliability. In order to prepare for these problems, it is definitely necessary to consider analysis of the demagnetization property in the analysis stage. Hence, this study aims to propose an analysis method of demagnetization characteristics by considering the recoil line and to establish a base capable of securing reliability of IPMSM for traction of and highlights the proposed analysis method through a performance test and temperature saturation test of the prototype.

The magnetic geared permanent magnet synchronous motor (MG-PMSM) is a PMSM that has two rotors with different rotation speeds and includes the function of magnetic gear. The design studies of the 45kW-class MG-PMSM are conducted for the application of the driving system for a tram. In this research, first, to derive the detailed model of the 45kW-class MG-PMSM for the tram, the analysis of the characteristics according to the stator winding method was performed. After selecting the winding method that can reduce the size of the MG-PMSM, two design topologies were applied to determine the number of stator poles, the number of outer rotor pole pieces, and the number of inner rotor poles of the MG-PMSM. A 45kW-class MG-PMSM detailed model was derived by applying a design topology that can minimize the size of the MG-PMSM, and it was confirmed that the required performance is satisfied through electromagnetic characteristics analysis. In addition, the 4.5kW-class small-scaled MG-PMSM prototype with concentrated winding was manufactured to verify the validity of the analytical model, and performance verification was performed.