To achieve the greenhouse gas reduction targets formulated in the European Green Deal, energy- and resource-intensive industries such as the steel industry will have to adapt or convert their production. In the long term, new technologies are promising. However, carbon capture storage and utilization solutions could be considered as short-term retrofitting solutions for existing steelworks. In this context, this paper presents a first experimental demonstration of an approach to the utilization of process off-gases generated in a steelworks by producing methane and methanol in hydrogen-intensified syntheses. Specifically, the integration of two methane synthesis reactors and one methanol synthesis reactor into a steel plant is experimentally simulated. An innovative monitoring and control tool, namely, a dispatch controller, simulates the process off-gas production using a digital twin of the steel plant and optimizes its distribution to existing and new consumers. The operating states/modes of the three reactors resulting from the optimization problem to be solved by the dispatch controller are distributed in real time via an online OPC UA connection to the corresponding experimental plants or their operators and applied there in a decentralized manner. The live coupling test showed that operating values for the different systems can be distributed in parallel from the dispatch controller to the test rigs via the established communication structure without loss. The calculation of a suitable control strategy is performed with a time resolution of one minute, taking into account the three reactors and the relevant steelworks components. Two of each of the methane/methanol synthesis reactors were operated error-free at one time for 10 and 7 h, respectively, with datasets provided by the dispatch controller. All three reactor systems were able to react quickly and stably to dynamic changes in the load or feed gas composition. Consistently high conversions and yields were achieved with low by-product formation.

This work investigates the cost-efficient integration of renewable hydrogen into steelworks for the production of methane and methanol as an efficient way to decarbonize the steel industry. Three case studies that utilize a mixture of steelworks off-gases (blast furnace gas, coke oven gas, and basic oxygen furnace gas), which differ on the amount of used off-gases as well as on the end product (methane and/or methanol), are analyzed and evaluated in terms of their economic performance. The most influential cost factors are identified and sensitivity analyses are conducted for different operating and economic parameters. Renewable hydrogen produced by PEM electrolysis is the most expensive component in this scheme and responsible for over 80% of the total costs. Progress in the hydrogen economy (lower electrolyzer capital costs, improved electrolyzer efficiency, and lower electricity prices) is necessary to establish this technology in the future.

This article focuses on fuel quality in biomass power plants and describes an online prediction method based on image analysis and regression modeling. The main goal is to determine the mixture fraction from blends of two wood chip species with different qualities and properties. Starting from images of both fuels and different mixtures, we used two different approaches to deduce feature vectors. The first one relied on integral brightness values while the latter used spatial texture information. The features were used as input data for linear and non-linear regression models in nine training classes. This permitted the subsequent prediction of mixture ratios from prior unknown similar images. We extensively discuss the influence of model and image selection, parametrization, the application of boosting algorithms and training strategies. We obtained models featuring predictive accuracies of R² > 0.9 for the brightness-based model and R² > 0.8 for the texture based one during the validation tests. Even when reducing the data used for model training down to two or three mixture classes—which could be necessary or beneficial for the industrial application of our approach—sampling rates of n < 5 were sufficient in order to obtain significant predictions.