In this study, the evaluation of the surface movements that took place after the completion of an earth fill dam constructed by staged construction have been evaluated by means of geodetic and geotechnical methods. Horizontal and vertical displacement measurements which were recorded between the years of 1987–1991 and 1991–1996 have been analyzed geodetically by using the Karlsruhe method. In both measurement periods, significant horizontal and vertical movements were found from adjustments and analyses of the measurements. The behavior of the dam and its foundation layers were analyzed by utilizing finite element method in two-dimensional plane-strain conditions to determine the horizontal and vertical surface movements. The results of geodetic measurements were compared with the results of the numerical analysis, and it is observed that there is a good agreement between the field measurements and computed values.
In today’s urbanizing world, home of 28 megacities, there is a growing need for tools to assess urban policies and support the design and implementation of effective development strategies. Unsustainable practices of urbanization bring major implications for land and environment, and cause a dramatic increase of urban vulnerability to natural hazards. In Istanbul megacity, disaster risk reduction represents a challenging issue for urban managers. In this paper, we show the relevance of the space-borne Differential SAR Interferometry (DInSAR) technique as a tool for supporting risk management, and thus contributing to achieve the urban sustainability. To this aim, we use a dataset of high resolution SAR images collected by the TerraSAR-X satellite that have been processed through the advanced (multi-temporal) Small BAseline Subset (SBAS)—DInSAR technique, thus producing spatially-dense deformation velocity maps and associated time-series. Results allow to depict an up-to-date picture of surface deformations occurring in Istanbul, and thus to identify urban areas subject to potential risk. The joint analysis of remotely sensed measurements and ancillary data (geological and urban development information) provides an opportunity for city planners and land professionals to discuss on the mutual relationship between urban development policies and natural/man-made hazards.
1 August 2007 in Journal of Geotechnical and Geoenvironmental Engineering
Alibey Dam is located near Istanbul in Turkey on the Alibey Stream, 4.5 km north of its point of confluence with Golden Horn, an ancient submerged river mouth. It was constructed as an earthfill dam over 30-m-thick soft valley sediments. Before the construction of the dam, field and laboratory tests were performed to determine the geotechnical characteristics of the foundation soils. During the construction and many years after the construction of the earthfill embankments, including the cofferdams and the intermediate fills, the response of the foundation soils was monitored by extensive field instrumentation generating a unique long-term (over 25 years) database. With proper instrumentation and careful monitoring of the collected data, field construction rates could be adjusted and the earth dam was safely constructed on the thick soft deposits. Approaches to settlement prediction were evaluated in a historical context, starting with the simplified one-dimensional approach available at the time of const...
Liquefaction occurs in saturated sandy and silty soils due to transient and repetitive seismic loads. The result is a loss of soil strength caused by increased pore pressure. In this study, the response of buried pipes in the Iskenderun region during the earthquakes centered in the subprovinces of Pazarcık and Elbistan in Kahramanmaraş, Turkey, on 6 February 2023, has been investigated utilizing numerical analyses using geological data from two different areas. The effects of shallow and deep rock layers, pipe diameter, burial depths, and boundary conditions have been evaluated. In the analyses, records from two stations located in Iskenderun during the Pazarcık, Kahramanmaraş earthquake have been utilized, taking into account records from shallow rock (station no. 3116) and thick soil layers (station no. 3115), as determined from shear wave velocities. Modeling conducted using station 3116 records has revealed the effect of shallow rock layers on pipe displacement, indicating less damage in areas where the rock layer is close to the surface. The pipe uplift risk is higher when the bedrock is deep, and the overlying soil layer is liquefiable (station no. 3115). It has been determined that depth to bedrock significantly influences upward movement of the pipe. In the areas where the bedrock is deep, expanding the boundary conditions has helped reduce the effects of settlements outside the pipe, preventing the occurrence of pipe uplift. Increasing the pipe diameter has increased the amount of uplift. The analysis results are consistent with field observations.
Freeze–thaw (F-T) cycles are one of the most important factors affecting the performance of silty soils with high kaolin content in seasonally freezing regions. This study investigates the improvement of a high-plasticity clayey silt soil (MH) with microencapsulated phase change material (mPCM) to prevent changes in mechanical properties when subjected to freeze–thaw cycles. Unconfined compression, one-dimensional compression, and freeze and thaw tests were performed to evaluate the behavior of treated soil under different freeze/thaw cycles and with different mPCM ratios. It has been observed that the mPCM additive decreased the unconfined compression strength (UCS); however, the strength of the soil held constant during the increasing F-T cycles, and the increase in the mPCM additive content increased the strength of the soil. The inclusion of mPCM affected the compression of the soil and increased settlement (∆H), although the settlement remained constant with increasing freeze–thaw cycles. It has been noted that the compression behavior, which is least affected by the unconfined compressive strength and freeze/thaw cycles, is achieved with the addition of 10% mPCM. As a result of the tests, it was determined that the most suitable additive mPCM ratio is 10% for the compression and strength behaviors.
1 July 2024 in Turkish Journal of Civil Engineering
Freeze-thaw cycles are prevalent climatic phenomena with substantial effects on soils, leading to alterations in soil strength, stiffness, and hydraulic properties due to disruptions in the soil structure. With the ongoing climate change, weather patterns have grown progressively erratic, resulting in more frequent occurrences of extreme weather events, including heavy snowfall, intense rainfall, and windstorms, even in regions characterized typically with mild climates across the globe. The climate change can potentially threat man-made infrastructure constructed within or upon local soils, regardless of their susceptibility to freezing in temperate climates. The principal objective of this study is to assess the influence of freeze-thaw cycles on the California Bearing Ratio (CBR %) across 12 distinct soils with variations in granulometry and mineralogy. The freeze-thaw cycles resulted in a notable decrease in CBR (%) within the range of 40% to 70%. A strong inverse correlation with D50 was observed regarding the decrease in CBR (%). Nevertheless, it was discerned that the decrease in CBR (%) subsequent to freeze-thaw cycles varied among soil samples sharing identical D50 and liquid limit characteristics. The aim of this study is to enhance our comprehension of how freeze-thaw cycles can impact the bearing capacity of these soils, thereby providing essential insights for predicting their behavior and potential influence on infrastructure in the context of climate change.