Eun Sung Lee

Mr. Eun Sung Lee

Rocket Propulsion Laboratory, Department of Aerospace Engineering, Pusan National University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2021 in Energies
Verified
Journal Article
Open access
PDF file
HHHyung-Seok Han
Hyung-Seok Han
ELEun Sung Lee
Eun Sung Lee
Jeong-Yeol ChoiJeong-Yeol Choi
Jeong-Yeol Choi
A small rotating detonation engine (RDE) model and the corresponding experimental setup were constructed for the experimental investigation of the detonation propagation characteristics and thrust performance of a circular RDE. Experiments were conducted at a range of 0.3–2.5 equivalence ratio with a total mass flow rate of less than 180.0 g/s using a C2H4/O2 mixture. Irregularly unstable detonative combustion occurs immediately after the detonation initiation, which includes initiation, propagation, decaying, and the merging of detonation waves. Following this, periodically unsteady detonative combustion occurs in the circular channel, resulting in the stable operation of the RDE. During stable operation, two detonation waves are predominant, rotating along the wall at a speed lower than the Chapman–Jouguet (CJ) detonation speed. The characteristic velocity efficiency is approximately 73% on average. The low characteristic velocity efficiency is presumed to be caused by the unoptimized combustion channel and the poor mixing efficiency owing to the two-dimensional injector configuration. The effect of the RDE component design and the RDE flow field characteristics need to be further investigated for improving the performance of the RDE.

28 April 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
JLJae-Hyuk Lee
Jae-Hyuk Lee
ELEun Sung Lee
Eun Sung Lee
HHHyung-Seok Han
Hyung-Seok Han
MKMinsu Kim
Minsu Kim
Jeong-Yeol ChoiJeong-Yeol Choi
Jeong-Yeol Choi
Vitiation air heater (VAH) combustion characteristics for a direct-connect scramjet combustor (DCSC) were experimentally studied. The VAH consists of a head, modular chamber, and circular-to-rectangular shape transition (CRST) nozzle. The CRST nozzle transforms the circular cross-sectioned rocket-type VAH into a rectangular cross-sectioned scramjet combustor. The CRST nozzle exit Mach numbers at the top, middle, and bottom were measured using a tungsten wedge. The oblique shock formed by the wedge was captured using Schlieren visualization and recorded with a high-speed camera. The θ-β-M relation showed that the exit Mach number was 2.04 ± 0.04 with a chamber pressure of 1.685 ± 0.07 MPa. With the VAH design point verified, preliminary scramjet combustor ignition tests were conducted. As the fuel was not auto-ignited by the vitiated air, the forced ignition method, in which VAH ignition flame ignites the scramjet fuel, was used. The Schlieren images showed that a cavity shear layer combustion mode was formed and also showed that the forced ignition method could be used as a reference model for the ignitor-ignition method.

28 December 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
JLJae-Hyuk Lee
Jae-Hyuk Lee
JRJaehoon Ryu
Jaehoon Ryu
ELEun Sung Lee
Eun Sung Lee
HHHyung-Seok Han
Hyung-Seok Han
Jeong-Yeol ChoiJeong-Yeol Choi
Jeong-Yeol Choi
A noncircular engine cross-section could provide great flexibility in the integration of propulsion into the airframe. In this work, a tri-arc RDE was constructed and tested as an example of noncircular cross-sectioned RDE. The operational characteristics of detonation wave propagation and thrust performance were investigated and compared with an equivalent circular RDE under the same operating conditions. High-speed camera images, short-time Fourier transform (STFT), and fast Fourier transform (FFT) were used for the investigation. The tri-arc RDE showed very similar characteristics to the circular RDE but exhibited slightly better stability and propulsion performance than the circular RDE. We consider that repeated curvature changes positively affect the stability of detonation wave propagation. The experimental data show contradicting results from the numerical analysis with a homogeneous mixture assumption in which the detonation pressures at the convex corner were greater than those at the concave corner. It is reasoned that the tri-arc injector design provides a non-uniform mixture composition, resulting in a strong detonation at the convex corner. Overall, the noncircular RDE of a tri-arc shaped cross-section is demonstrated, one which performs slightly better than an ordinary circular-shaped RDE both in detonation stability and performance.

11 August 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
MKMinsu Kim
Minsu Kim
IKIn-Hoi Koo
In-Hoi Koo
KLKeon-Hyeong Lee
Keon-Hyeong Lee
ELEun Sung Lee
Eun Sung Lee
HHHyung-Seok Han
Hyung-Seok Han
Jeong-Yeol ChoiJeong-Yeol Choi
Jeong-Yeol Choi
This experimental investigation focused on the ignition and combustion characteristics of a tandem cavity-based scramjet combustor with side-by-side identical cavities. This study utilized the Pusan National University-direct connect scramjet combustor (PNU-DCSC), which was capable of simulating flight conditions at Mach number 4.0–5.0 and altitudes of 20–25 km using the vitiated air heater (VAH). The combustion tests were conducted under off-design point conditions corresponding to low inlet enthalpy. It is a condition in which self-ignition does not occur, and a micro pulse detonation engine (μPDE) ignitor is used. The results revealed that as the injection pressure of the gaseous hydrogen fuel (GH2) and the corresponding equivalence ratio increased, the combustion mode transitioned from the cavity-shear layer flame to the jet-wake flame. Furthermore, the measured wall static pressure profiles along the isolator and scramjet combustor indicated that the region of elevated pressure distribution caused by the shock train expanded upstream with higher equivalence ratios. When ignited from the secondary cavity, the combustion area did not extend to the primary cavity at lower equivalence ratios, while it expanded upstream faster with higher equivalence ratios. Therefore, the combustion characteristics of the tandem cavity were found to vary based on the overall equivalence ratio of the main fuel (GH2) and ignition position.