Transistors operating at high frequencies are the basic building blocks of millimeter-wave communication and sensor systems. The high charge-carrier mobility and saturation velocity in graphene can open way for ultra-fast field-effect transistors with a performance even better than what can be achieved with III-V-based semiconductors. However, the progress of high-speed graphene transistors has been hampered by fabrication issues, influence of adjacent materials, and self-heating effects. Here, we report on the improved performance of graphene field-effect transistors (GFETs) obtained by using a diamond substrate. An extrinsic maximum frequency of oscillation ${f}_{{\mathrm {max}}}$ of up to 54 GHz was obtained for a gate length of 500 nm. Furthermore, the high thermal conductivity of diamond provides an efficient heat-sink, and the relatively high optical phonon energy of diamond contributes to an increased charge-carrier saturation velocity in the graphene channel. Moreover, we show that GFETs on diamond exhibit excellent scaling behavior for different gate lengths. These results promise that the GFET-on-diamond technology has the potential of reaching sub-terahertz frequency performance.
The stability of valley polarized electron states is crucial for the development of valleytronics. A long relaxation time of the valley polarization is required to enable operations to be performed on the polarized states. Here, we investigate the stability of valley polarized states in diamond, expressed as relaxation time. We have found that the stability of the states can be extremely long when we consider the electron-phonon scattering processes allowed by symmetry considerations. We determine electron-phonon coupling constants by Time-of-Flight measurements and Monte Carlo simulations and use these data to map out the relaxation time temperature dependency. The relaxation time for diamond can be microseconds or longer below 100 K and 100 V/cm due to the strong covalent bond, which is highly encouraging for future use in valleytronic applications.
The mobility-lifetime ( ) product is an important parameter that determines the performance of electronic and photonic devices. To overcome the previously reported difficulties in measuring the product at cryogenic temperatures, we implement a time-resolved cyclotron resonance method to determine the carrier lifetime τ. After clarifying the difference between the AC and DC mobilities measured by cyclotron resonance and time-of-flight methods, respectively, we demonstrate an inverse temperature dependence of the product. The highest recorded product of 0.2 cm2/V, which is approximately 100 times the room-temperature value, was obtained at 2 K for chemical-vapor-deposition diamond of the highest currently available purity.
1 November 2020 in Advanced Theory and Simulations
A method based on the scaling properties of the Boltzmann transport equation is proposed to identify the dominant scattering mechanisms that affect charge transport in a semiconductor. This method uses drift velocity data of mobile charges at different lattice temperatures and applied electric fields and takes into account the effect of carrier heating. By performing time‐of‐flight measurements on single‐crystalline diamond, hole and electron drift velocities are measured under low‐injection conditions within the temperature range 10–300 K. Evaluation of the data using the proposed method identifies acoustic phonon scattering as the dominant scattering mechanism across the measured temperature range. The exception is electrons at 100–200 K where conduction‐band valley repopulation has a prominent effect. At temperatures below ≈80 K, where valley polarization is observed for electrons, transport dominated by acoustic phonon scattering is observed in different valleys separately. The scaling model is additionally tested on data from highly resistive gallium arsenide samples to demonstrate the versatility of the method. In this case, impurity scattering can be ruled out as the dominant scattering mechanism in the samples for the temperature range 80–120 K.