Owing to the significant number of hybrid generation systems (HGSs) containing various energy sources, coordination between these sources plays a vital role in preserving frequency stability. In this paper, an adaptive coordination control strategy for renewable energy sources (RESs), an aqua electrolyzer (AE) for hydrogen production, and a fuel cell (FC)-based energy storage system (ESS) is proposed to enhance the frequency stability of an HGS. In the proposed system, the excess energy from RESs is used to power electrolysis via an AE for hydrogen energy storage in FCs. The proposed method is based on a proportional-integral (PI) controller, which is optimally designed using a grey wolf optimization (GWO) algorithm to estimate the surplus energy from RESs (i.e., a proportion of total power generation of RESs: Kn). The studied HGS contains various types of generation systems including a diesel generator, wind turbines, photovoltaic (PV) systems, AE with FCs, and ESSs (e.g., battery and flywheel). The proposed method varies Kn with varying frequency deviation values to obtain the best benefits from RESs, while damping the frequency fluctuations. The proposed method is validated by considering different loading conditions and comparing with other existing studies that consider Kn as a constant value. The simulation results demonstrate that the proposed method, which changes Kn value and subsequently stores the power extracted from the RESs in hydrogen energy storage according to frequency deviation changes, performs better than those that use constant Kn. The statistical analysis for frequency deviation of HGS with the proposed method has the best values and achieves large improvements for minimum, maximum, difference between maximum and minimum, mean, and standard deviation compared to the existing method.

Recently, electric vehicles (EVs) have proven remarkable impacts on reducing pollution and their suitability for utilizing renewable energy sources (RESs) instead of fossil fuels. The continuously increasing number of installed EVs has encouraged their employment for performing additional functionalities in utility grids. This paper provides study for the impacts of EV integration approaches on enhancing the operation of utility grids. The proposed study considers the targeted renewable energy powered utility grids with installed energy storage devices. Wind energy has been utilized as a case study for the RES with considering its stochastic characteristics and its continuous fluctuations with wind speed. Additionally, the superconducting magnetic energy storage system (SMES) device is chosen due to its promising long-life operation. The various aspects of point of common coupling (PCC) voltage fluctuations, reactive power support, leveling active power of the on-peak period, and power losses are considered in the proposed study. Moreover, fuzzy logic controller (FLC) systems have been proposed for controlling EVs and the SMES device. The energy management between the installed EVs, SMES, wind, and utility grid side is achieved through the coordination of the FLC systems. The results show that reduced peak and mean values of total power losses and line active power are obtained by the proposed coordination method. Moreover, improved profiles of the PCC voltage, reactive power support, active power leveling, and sustainable and reliable power supply are obtained by the proposed method for wide operating ranges and modes of operation.

This paper describes the integration of a photovoltaic (PV) renewable energy source with a superconducting magnetic energy storage (SMES) system. The integrated system can improve the voltage stability of the utility grid and achieve power leveling. The control schemes employ model predictive control (MPC), which has gained significant attention in recent years because of its advantages such as fast response and simple implementation. The PV system provides maximum power at various irradiation levels using the incremental conductance technique (INC). The interfaced grid side converter of the SMES can control the grid voltage by regulating its injected reactive power to the grid, while the charge and discharge operation of the SMES coil can be managed by the system operator to inject/absorb active power to/from the grid to achieve the power leveling strategy. Simulation results based on MATLAB/Simulink® software prove the fast response of the system control objectives in tracking the setpoints at different loading scenarios and PV irradiance levels, while the SMES injects/absorbs active and reactive power to/from the grid during various events to improve the voltage response and achieve power leveling strategy.

This paper presents a new grid-forming strategy for hybrid AC/DC microgrids using bidirectional virtual inertia support designed to address weak grid conditions. The stability of hybrid AC/DC microgrids heavily relies on the AC mains frequency and the DC-link voltage, and deviations in these factors can lead to undesirable outcomes such as load curtailments and power system congestions and blackouts. This paper introduces a unique approach that leverages bidirectional virtual inertia support to enhance the stability and reliability of hybrid AC/DC microgrids under weak grid conditions. The proposed strategy employs virtual inertia as a buffer to mitigate rapid changes in DC-link voltage and AC frequency, thereby enhancing system stability margins. This strategy significantly contributes to a more stable and reliable grid operation by reducing voltage and frequency fluctuations. A standard hybrid AC/DC microgrid configuration is used to implement the bidirectional virtual inertia support, where a bidirectional interlinking converter control is adjusted to deliver inertia support to both the AC and DC subgrids. This converter utilizes the DC grid voltage and AC grid frequency as inputs, effectively managing active power balance and implementing auxiliary functions. Extensive simulations are conducted under weak grid conditions and standalone mode to validate the effectiveness of the proposed strategy. The simulation results demonstrate a remarkable improvement in frequency nadir, rate-of-change-of-frequency (RoCoF), and DC bus voltage deviation in the hybrid AC/DC microgrids. The bidirectional virtual inertia support substantially reduces voltage and frequency fluctuations, enhancing the microgrid stability and resilience. There is an improvement of over 45% and 25% in the frequency deviation and voltage deviation, respectively, achieved through implementing the proposed control strategy.