Mutual coupling (MC) between elements in an antenna array could significantly affect antenna performance, but this effect has rarely been reported for circularly polarized (CP) antennas. Therefore, this paper investigates a wideband CP multiple-input-multiple-output (MIMO) antenna operating between 1.8 and 2.6 GHz. A line patch was introduced between closely placed radiating elements (0.3λ) to produce a high isolation between elements in the proposed antenna. The designed MIMO antenna has a wide impedance bandwidth, a wide axial ratio (AR) bandwidth, a very low MC (S21 <; -25 dB), a low envelop correlation coefficient (ECC <; 0.01), a high diversity gain (DG ~ 10 dB), and a realized gain of above 2 dB over the entire frequencies. The prototype of the proposed antenna geometry was fabricated and measured. A good agreement between the simulated and measured results was observed.

This paper presents a hybrid mutual coupling reduction technique applied onto a dual-band textile MIMO antenna for wireless body area network and 5G applications. The MIMO antenna consists of two hexagonal patch antennas, each integrated with a split-ring (SR) and a bar slot to operate in dual-band mode at 2.45 GHz and 3.5 GHz. Each patch is dimensioned at $47.2 \times 31$ mm ² . This hybrid technique results in a simple structure, while enabling significant reduction of mutual coupling (MC) between the closely spaced patches (up to $0.1\lambda$ ). This technique combines a line patch and a patch rotation technique, explained as follows. First, a line patch is introduced at an optimized distance to enable operation with a broad impedance bandwidth at both target frequencies. One of the patches is then rotated by 90° at an optimized distance, resulting in a significant MC suppression while maintaining the dual and broad impedance bandwidth. The proposed MIMO antenna is further evaluated under several bending configurations to assess its robustness. A satisfactory agreement between simulated and measured results is observed in both planar and bending conditions. Results show that the MIMO antenna achieves an impedance bandwidth of 4.3 % and 6.79 % in the 2.45 GHz and 3.5 GHz band, respectively. Moreover, very low MC ( $S_{21} < -30$ dB) is achieved, with a low (< 0.002) envelop correlation coefficient, and about 10 dB of diversity gain at both desired frequencies using this technique. Even when bent at an angle of 50° at the $x$ - and $y$ -axes, the antenna bent maintained a realized gain of 1.878 dBi and 4.027 dBi in the lower and upper band, respectively. A robust performance is offered by the antenna against the lossy effects of the human body with good agreements between simulated and measured results.

The RFEH design challenges can be broadly classified into overall radio frequency direct current (RF-to-DC) power conversion efficiency (PCE), form factor, operational bandwidth (BW), and compactness. A detailed overview of the essential components of an RFEH system is presented in this paper. Various design approaches have been proposed for the realization of compact RFEH circuits that contribute immensely to mm-wave rectenna design. Effective mechanisms for configuring the rectenna modules based on the recommended spectrums for the RFEH system were also outlined. This study featured a conceptual viewpoint on design tradeoffs, which were accompanied by profound EH solutions perspectives for wireless power communications. The work covers some challenges attributed to 5G EH in mm-wave rectenna: from a controlled source of communication signals to distributed ambient EH and system level design. Conversely, the primary targets of this work are to: (I) examine a wide range of ambient RF sources and their performance with various antennae and RF-rectifier layouts; (II) propose unique rectenna design techniques suitable for current trends in wireless technology; (III) explore numerous approaches for enhancing the rectenna or RF-rectifier efficiency in a low-power ambient environment; and (IV) present the findings of a comprehensive review of the exemplary research that has been investigated. These are aimed toward addressing the autonomous system’s energy challenges. Therefore, with the careful management of the reported designs, the rectenna systems described in this study would influence the upcoming advancement of the low-power RFEH module.

This paper analysed the effects of bending on the performance of a textile antenna wherein the antenna under test was made of felt substrate for both industrial, scientific, and medical (ISM) band and WBAN applications at 2.45GHz. Moreover, the conductive material was used for the patch, and the ground plane used a 0.17mm Shieldit textile. Meanwhile, the antenna structure was in the form of rectangular, with a line patch in between elements to abate the mutual coupling effect. The measured operating frequency range of the antenna spanned from 2.33GHz to 2.5GHz with a gain of 4.7 dBi at 2.45GHz. In this paper, the antenna robustness was examined by bending the structure on different radii and degrees along both X- and Y-axis. Next, the effects on return loss, bandwidth, isolation, and radiation characteristics were analysed. This paper also discovered that the antennas performance remained acceptable as it was deformed, and the measured results agreed well with the simulation.