SURAJO MUHAMMAD

Mr. SURAJO MUHAMMAD

Multimedia University
+1
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2021 in IEEE Access
Verified
Journal Article
Open access
SURAJO MUHAMMADSURAJO MUHAMMAD
SURAJO MUHAMMAD
JTJun-Jiat Tiang
Jun-Jiat Tiang
SWSew Kin Wong
Sew Kin Wong
ASAMOR SMIDA
AMOR SMIDA
Ridha GhayoulaRidha Ghayoula
Ridha Ghayoula
AIAmjad Iqbal
Amjad Iqbal
In this paper, a long-range dual-band rectenna for harvesting ambient radio frequency (RF) energy from GSM/900 and GSM/1800 is presented. Theoretical analysis of the proposed dual-band impedance matching network (IMN) is conducted using a modified $\Pi $ –section matching network (MN). The RF-rectifier is integrated with a dual-band inverted-F monopole antenna. The rectenna circuit complexity is minimized by introducing a dual-band IMN, which plays a significant role in improving the harvester RF-to-dc power conversion efficiency (PCE). Measurement results of the proposed design achieved a peak RF-to-dc PCE of 12.93% and 8.0% for an input power of −30 dBm at 0.9 GHz, and 1.8 GHz, respectively. The RF harvester ambiance measurement attained an output dc voltage of 0.374 V. The circuit generates 0.747 V using a low-powered bq25504-674 evaluation module (EVM). Thus, adequate energy management of the proposed rectenna can be used to power many low-powered devices from the harvested ambient RF energy.

20 March 2022 in Electronics
Verified
Journal Article
Open access
PDF file
SURAJO MUHAMMADSURAJO MUHAMMAD
SURAJO MUHAMMAD
JTJun-Jiat Tiang
Jun-Jiat Tiang
SWSew Kin Wong
Sew Kin Wong
Ali Hanafiah RambeAli Hanafiah Rambe
Ali Hanafiah Rambe
Ismahayati AdamIsmahayati Adam
Ismahayati Adam
Mohd Najib Mohd YasinMohd Najib Mohd Yasin
Mohd Najib Mohd Yasin
The RFEH design challenges can be broadly classified into overall radio frequency direct current (RF-to-DC) power conversion efficiency (PCE), form factor, operational bandwidth (BW), and compactness. A detailed overview of the essential components of an RFEH system is presented in this paper. Various design approaches have been proposed for the realization of compact RFEH circuits that contribute immensely to mm-wave rectenna design. Effective mechanisms for configuring the rectenna modules based on the recommended spectrums for the RFEH system were also outlined. This study featured a conceptual viewpoint on design tradeoffs, which were accompanied by profound EH solutions perspectives for wireless power communications. The work covers some challenges attributed to 5G EH in mm-wave rectenna: from a controlled source of communication signals to distributed ambient EH and system level design. Conversely, the primary targets of this work are to: (I) examine a wide range of ambient RF sources and their performance with various antennae and RF-rectifier layouts; (II) propose unique rectenna design techniques suitable for current trends in wireless technology; (III) explore numerous approaches for enhancing the rectenna or RF-rectifier efficiency in a low-power ambient environment; and (IV) present the findings of a comprehensive review of the exemplary research that has been investigated. These are aimed toward addressing the autonomous system’s energy challenges. Therefore, with the careful management of the reported designs, the rectenna systems described in this study would influence the upcoming advancement of the low-power RFEH module.

1 October 2020 in Electronics
Verified
Journal Article
Open access
PDF file
SURAJO MUHAMMADSURAJO MUHAMMAD
SURAJO MUHAMMAD
JTJun-Jiat Tiang
Jun-Jiat Tiang
SWSew Kin Wong
Sew Kin Wong
AIAmjad Iqbal
Amjad Iqbal
Mohammad AlibakhshikenariMohammad Alibakhshikenari
Mohammad Alibakhshikenari
Ernesto LimitiErnesto Limiti
Ernesto Limiti
In this paper, a compact rectifier, capable of harvesting ambient radio frequency (RF) power is proposed. The total size of the rectifier is 45.4 mm × 7.8 mm × 1.6 mm, designed on FR-4 substrate using a single-stage voltage multiplier at 900 MHz. GSM/900 is among the favorable RF Energy Harvesting (RFEH) energy sources that span over a wide range with minimal path loss and high input power. The proposed RFEH rectifier achieves measured and simulated RF-to-dc (RF to direct current) power conversion efficiency (PCE) of 43.6% and 44.3% for 0 dBm input power, respectively. Additionally, the rectifier attained 3.1 V DC output voltage across 2 kΩ load terminal for 14 dBm and is capable of sensing low input power at −20 dBm. The work presents a compact rectifier to harvest RF energy at 900 MHz, making it a good candidate for low powered wireless communication systems as compares to the other state of the art rectifier.

5 December 2023 in IEEE Access
Verified
Journal Article
Open access
MWMohamed Waly
Mohamed Waly
ASAMOR SMIDA
AMOR SMIDA
NANasser Ali Aljarallah
Nasser Ali Aljarallah
Ridha GhayoulaRidha Ghayoula
Ridha Ghayoula
ANAhmed S. Negm
Ahmed S. Negm
AIAmjad Iqbal
Amjad Iqbal
This paper presents a unique antenna that is designed to be efficient, with improved gain and partial flexibility, for use in wearable biomedical telemetry applications. The antenna design utilizes a semi-flexible RO5880 substrate material (dielectric constant, ε r = 2.2, loss tangent, (tan δ) = 0.0009) with physical dimensions measuring 0.47λ g × 0.47λ g . The model involves the incorporation of rectangular inverted "C" slots, which effectively results in a reduction of the resonant frequency. Additionally, a distributed rectangular slot is introduced on the ground plane, contributing to the augmentation of the operational bandwidth. The operational frequency of the proposed antenna design is 2.40 GHz, accompanied by a bandwidth (BW) of 320 MHz at a -10 dB level. This equates to a fractional percentage bandwidth (FBW) of 13.33% centered around the frequency of 2.40 GHz. The antenna design presented in this work demonstrates the preservation of improved gain and efficiency, achieving values of 3.67 dBi and 94%, respectively, at a frequency of 2.40 GHz. The work demonstrates through simulation and experimental outcomes that the antenna exhibits minimal impact on parameters such as gain reflection coefficient (|S11|), BW, and bending efficiency. Furthermore, the antenna underwent simulation and experimental testing in close proximity to the human body, revealing favorable operational characteristics. The proposed antenna exhibits substantial potential as a viable option for wearable biomedical instruments. Thus, the proposed wearable antenna design in this study offers a wideband antenna for ISM band applications, expanding bandwidth without compromising performance. Bending the antenna minimally affects gain, bandwidth, and efficiency when worn on the body, making it suitable for wearables. It also maintains a reasonably low Specific Absorption Rate (SAR), reducing wave absorption by the body. Unique features like rectangular inverted "C" slots and a distributed rectangular slot on the ground plane enhance bandwidth while maintaining performance during bending.

27 September 2023 in Electronics
Verified
Journal Article
Open access
PDF file
SVSamrrithaa G. Veloo
Samrrithaa G. Veloo
JTJun-Jiat Tiang
Jun-Jiat Tiang
SURAJO MUHAMMADSURAJO MUHAMMAD
SURAJO MUHAMMAD
SWSew Kin Wong
Sew Kin Wong
This paper presents the deployment of a hybrid energy harvesting system that combines a wireless energy harvesting (EH) system and a 6 V, 170 mA monocrystalline solar energy derived from the Sun’s rays. The hybrid energy harvesting (HEH) system comprises the rectifier, the solar cell panel, the charging circuit, and the EM4325 embedded RFID tag. This study aims to design an efficient EH system capable of increasing the read range of an active RFID tag. The proposed approach integrates a meandered line radio frequency identification (RFID) tag with an EM4325 IC chip as the receiver antenna. A halfwave doubler RF rectifier circuit is connected to the antenna using a 50 Ω SMA connector to convert the captured RF waves into usable electrical power. A solar energy charging module equipped with a Maximum Power Point Tracking (MPPT) system, a rechargeable lithium-ion battery, and a DC-DC converter is configured to manage and store the harvested energy efficiently. The UHF tag antenna operates at 919 MHz, achieving a peak gain of 3.54 dB. The proposed rectenna achieves a maximum measured harvested power conversion efficiency (PCE) of 55.14% for an input power (Pin) of 15 dBm at a distance of 5.10 cm, while the solar cell panel realizes 3.92 W of power. Experimental results demonstrate the hybrid harvester system’s effectiveness, achieving a PCE of 86.49% at an output voltage (VDC) of 5.35 V. The main advantage of this approach is the creation of a compact hybrid RF and solar EH system by combining the solar cell panel with the antenna, thus enabling multi-functionality.

1 January 2021 in Computers, Materials & Continua
Verified
Journal Article
Open access
SURAJO MUHAMMADSURAJO MUHAMMAD
SURAJO MUHAMMAD
JTJun Jiat Tiang
Jun Jiat Tiang
SWSew Kin Wong
Sew Kin Wong
AIAmjad Iqbal
Amjad Iqbal
ASAmor Smida
Amor Smida
MAMohamed Karim Azizi
Mohamed Karim Azizi
This paper presents a compact multi-band rectifier with an improved impedance matching bandwidth. It uses a combination of –matching network (MN) at Port-1, with a parallel connection of three cell branch MN at Port-2. The proposed impedance matching network (IMN) is adopted to reduce circuit complexity, to improve circuit performance, and power conversion efficiency (PCE) of the rectifier at low input power. The fabricated rectifier prototype operates at 0.92, 1.82, 2.1, 2.46 and 2.65 GHz covering GSM/900, GSM/1800, UMTS2100, and Wi-Fi/2.45–LTE2600. The size of the compact rectifier on the PCB board is . The fabricated rectifier achieved an RF-to DC (radio frequency direct current) PCE of 31.8%, 24%, 22.7%, and 15%, and 14.1% for −20 dBm at the five respective measured operating frequencies. The circuit attains a peak RF-to-DC PCE of 82.3% for an input power of 3 dBm at 0.92 GHz. The proposed rectifier realizes an ambient output dc voltage of 454 mV for multi-tone input signals from the two ports. The rectifier drives a bq25504-674 power management module (PMM) to achieve 1.21 V from the two-port connection. The rectifier has the ability to exploit both frequency domain through the multi-band operation with good impedance bandwidth and a spatial domain using dual-port configuration. Hence, it is a potential candidate for various applications in radio frequency energy harvesting (RFEH) system.