In this paper, a dual-mode dual-band filter based on half-mode substrate integrated waveguide (HMSIW) is presented. The proposed filter has the capability to tune the two pass-bands independently. The proposed filter consists of two HMSIW resonators coupled through a pair of E-shaped coupling slots. Two resonating modes (TE101 and TE102) are excited in each resonator. A varactor diode is used in the proposed filter for tuning purpose. The varactor diode is placed in the structure in such a way that both bands can be tuned independently. The lower passband can be tuned from 3.26 to 3.47 GHz with insertion loss of 0.2-2.9 dB. The higher passband can be tuned from 5.47 to 6.13 GHz with low insertion loss of 0.1-2.1 dB. The presented results show the flexibility of the filter to achieve desired responses and its suitability for integration with any tunable planar structure. A good agreement between the simulated and measured results is observed.

Fifth generation (5G) is a recent wireless communication technology in mobile networks. The key parameters of 5G are enhanced coverage, ultra reliable low latency, high data rates, massive connectivity and better support to mobility. Enhanced coverage is one of the major issues in the 5G and beyond 5G networks, which will be affecting the overall system performance and end user experience. The increasing number of base stations may increase the coverage but it leads to interference between the cell edge users, which in turn impacts the coverage. Therefore, enhanced coverage is one of the future challenging issues in cellular networks. In this survey, coverage enhancement techniques are explored to improve the overall system performance, throughput, coverage capacity, spectral efficiency, outage probability, data rates, and latency. The main aim of this article is to highlight the recent developments and deployments made towards the enhanced network coverage and to discuss its future research challenges.

In this paper, a long-range dual-band rectenna for harvesting ambient radio frequency (RF) energy from GSM/900 and GSM/1800 is presented. Theoretical analysis of the proposed dual-band impedance matching network (IMN) is conducted using a modified $\Pi $ –section matching network (MN). The RF-rectifier is integrated with a dual-band inverted-F monopole antenna. The rectenna circuit complexity is minimized by introducing a dual-band IMN, which plays a significant role in improving the harvester RF-to-dc power conversion efficiency (PCE). Measurement results of the proposed design achieved a peak RF-to-dc PCE of 12.93% and 8.0% for an input power of −30 dBm at 0.9 GHz, and 1.8 GHz, respectively. The RF harvester ambiance measurement attained an output dc voltage of 0.374 V. The circuit generates 0.747 V using a low-powered bq25504-674 evaluation module (EVM). Thus, adequate energy management of the proposed rectenna can be used to power many low-powered devices from the harvested ambient RF energy.

This paper proposes compact and planar substrate integrated waveguide (SIW) based filters for single and triple band operations using two quarter-mode SIW (QMSIW) cavities. Two miniaturized QMSIW cavity resonators (QMSIWCRs) are capacitively coupled. Miniaturization in the QMSIWCR is achieved by adding an arc-shaped slot and a rectangular openended stub at the closed-end of the QMSIWCR. In the triple band bandpass filter (BPF), a capacitor is added to the openended side of the stub to enhance impedance matching at the higher modes. It has the centre frequencies of 2.1, 3.98 and 6.6 GHz with an insertion losses (ILs) of 0.93, 0.98, and 1.2 dB at the lower, middle and upper passband, respectively. Moreover, the measured fractional bandwidths (FBWs) are 16.97, 8.77, and 8.42% at the lower, middle and upper passband, respectively. Two rectangular slots are etched on the upper layer of the cavity to suppress the second mode and reduce coupling of the third mode; this realizes a single-band filter with an improved upper stopband response. It has the centre frequency of 2.1 GHz with a wide upper stop-band response, having a rejection level of 20 dB up to 3.19fc. The operation of filter is additionally discussed and verified by means of a lumped element equivalent circuit model and experimental results. The proposed filters are suitable for integration with other planar radio-frequency (RF) components due to their compact sizes, low ILs, planar structures, multiple transmission zeros (TZs) and adequate bandwidths.

This review provides an overview of the technological advancements and miniaturization trends in Substrate Integrated Waveguide (SIW) filters. SIW is an emerging planar waveguide structure for the transmission of electromagnetic (EM) waves. SIW structure consists of two parallel copper plates which are connected by a series of vias or continuous perfect electric conductor (PEC) channels. SIW is a suitable choice for designing and developing the microwave and millimetre-wave (mm-Wave) radio frequency (RF) components: because it has compact dimensions, low insertion loss, high-quality factor (QF), and can easily integrate with planar RF components. SIW technology enjoys the advantages of the classical bulky waveguides in a planar structure; thus is a promising choice for microwave and mm-Wave RF components.

A tunable multilayer diplexer using substrate integrated waveguide (SIW) technology is proposed in this letter. A multilayer design is chosen to easily control the electric and magnetic coupling through circular slots in order to achieve a wide-stopband response. The proposed diplexer works at two unique frequencies (centered at 10.5 and 13.5 GHz) with high isolation (>42 dB) and a wide stopband (up to 21 GHz). A varactor diode is used in the proposed diplexer for tuning. The varactor diode is placed in the structure in such a way that both channels can be tuned independently without affecting one another. The results show the flexibility of the diplexer in achieving desired responses and its suitability for integration with any tunable component. Simulated and measured results obtained are in good agreement.