The ongoing deployment of smart meters and different commercial devices has made electricity disaggregation feasible in buildings and households, based on a single measure of the current and, sometimes, of the voltage. Energy disaggregation is intended to separate the total power consumption into specific appliance loads, which can be achieved by applying Non-Intrusive Load Monitoring (NILM) techniques with a minimum invasion of privacy. NILM techniques are becoming more and more widespread in recent years, as a consequence of the interest companies and consumers have in efficient energy consumption and management. This work presents a detailed review of NILM methods, focusing particularly on recent proposals and their applications, particularly in the areas of Home Energy Management Systems (HEMS) and Ambient Assisted Living (AAL), where the ability to determine the on/off status of certain devices can provide key information for making further decisions. As well as complementing previous reviews on the NILM field and providing a discussion of the applications of NILM in HEMS and AAL, this paper provides guidelines for future research in these topics.

Over the years, several QRS complex detection algorithms have been proposed with different features, but the remaining problem is their implementation in low-cost portable platforms for real-time applications, where hardware resources are limited, still providing the accuracy level required for medical applications. The proposed algorithm copes at the same time with both requirements: 1) accuracy and 2) low resource consumption. In this paper, a real-time QRS complex detector is proposed. This algorithm is based on a differentiation at the pre-processing stage combined with a dynamic threshold to detect R peaks. The thresholding stage is based on a finite-state machine, which modifies the threshold value according to the evolution of the signal and the previously detected peak. It has been evaluated on several databases, including the standard ones, thus resulting sensitivities and positive predictivities better than 99.3%. In order to analyze the computational complexity of the algorithm, it has been compared with the well-known Pan and Tompkins' algorithm. As a result, the proposed detector achieves a reduction in processing time of almost 50% by using only the 25% of hardware resources (memory, adders, and multipliers).

Inertial motion analysis is having a growing interest during the last decades due to its advantages over classical optical systems. The technological solution based on inertial measurement units allows the measurement of movements in daily living environments, such as in everyday life, which is key for a realistic assessment and understanding of movements. This is why research in this field is still developing and different approaches are proposed. This presents a systematic review of the different proposals for inertial motion analysis found in the literature. The search strategy has been carried out in eight different platforms, including journal articles and conference proceedings, which are written in English and published until August 2022. The results are analyzed in terms of the publishers, the sensors used, the applications, the monitored units, the algorithms of use, the participants of the studies and the validation systems employed. In addition, we delve deeply into the machine learning techniques proposed in recent years and in the approaches to reduce the estimation error. In this way, we show an overview of the research carried out in this field, going into more detail in recent years, and providing some research directions for future work.

This work proposes the use of a hybrid acoustic and optical indoor positioning system for the accurate 3D positioning of Unmanned Aerial Vehicles (UAVs). The acoustic module of this system is based on a Time-Code Division Multiple Access (T-CDMA) scheme, where the sequential emission of five spread spectrum ultrasonic codes is performed to compute the horizontal vehicle position following a 2D multilateration procedure. The optical module is based on a Time-Of-Flight (TOF) camera that provides an initial estimation for the vehicle height. A recursive algorithm programmed on an external computer is then proposed to refine the estimated position. Experimental results show that the proposed system can increase the accuracy of a solely acoustic system by 70–80% in terms of positioning mean square error.

Acoustic local positioning systems (ALPSs) are an interesting alternative for indoor positioning due to certain advantages over other approaches, including their relatively high accuracy, low cost, and room-level signal propagation. Centimeter-level or fine-grained indoor positioning can be an asset for robot navigation, guiding a person to, for instance, a particular piece in a museum or to a specific product in a shop, targeted advertising, or augmented reality. In airborne system applications, acoustic positioning can be based on using opportunistic signals or sounds produced by the person or object to be located (e.g., noise from appliances or the speech from a speaker) or from encoded emission beacons (or anchors) specifically designed for this purpose. This work presents a review of the different challenges that designers of systems based on encoded emission beacons must address in order to achieve suitable performance. At low-level processing, the waveform design (coding and modulation) and the processing of the received signal are key factors to address such drawbacks as multipath propagation, multiple-access interference, near-far effect, or Doppler shifting. With regards to high-level system design, the issues to be addressed are related to the distribution of beacons, ease of deployment, and calibration and positioning algorithms, including the possible fusion of information obtained from maps and onboard sensors. Apart from theoretical discussions, this work also includes the description of an ALPS that was implemented, installed in a large area and tested for mobile robot navigation. In addition to practical interest for real applications, airborne ALPSs can also be used as an excellent platform to test complex algorithms (taking advantage of the low sampling frequency required), which can be subsequently adapted for other positioning systems, such as underwater acoustic systems or ultrawideband radio-frequency (UWB RF) systems.

The aim of this work is to propose an alternative way for wine classification and prediction based on an electronic nose (e-nose) combined with Independent Component Analysis (ICA) as a dimensionality reduction technique, Partial Least Squares (PLS) to predict sensorial descriptors and Artificial Neural Networks (ANNs) for classification purpose. A total of 26 wines from different regions, varieties and elaboration processes have been analyzed with an e-nose and tasted by a sensory panel. Successful results have been obtained in most cases for prediction and classification.