This work proposes the use of a hybrid acoustic and optical indoor positioning system for the accurate 3D positioning of Unmanned Aerial Vehicles (UAVs). The acoustic module of this system is based on a Time-Code Division Multiple Access (T-CDMA) scheme, where the sequential emission of five spread spectrum ultrasonic codes is performed to compute the horizontal vehicle position following a 2D multilateration procedure. The optical module is based on a Time-Of-Flight (TOF) camera that provides an initial estimation for the vehicle height. A recursive algorithm programmed on an external computer is then proposed to refine the estimated position. Experimental results show that the proposed system can increase the accuracy of a solely acoustic system by 70–80% in terms of positioning mean square error.

Acoustic local positioning systems (ALPSs) are an interesting alternative for indoor positioning due to certain advantages over other approaches, including their relatively high accuracy, low cost, and room-level signal propagation. Centimeter-level or fine-grained indoor positioning can be an asset for robot navigation, guiding a person to, for instance, a particular piece in a museum or to a specific product in a shop, targeted advertising, or augmented reality. In airborne system applications, acoustic positioning can be based on using opportunistic signals or sounds produced by the person or object to be located (e.g., noise from appliances or the speech from a speaker) or from encoded emission beacons (or anchors) specifically designed for this purpose. This work presents a review of the different challenges that designers of systems based on encoded emission beacons must address in order to achieve suitable performance. At low-level processing, the waveform design (coding and modulation) and the processing of the received signal are key factors to address such drawbacks as multipath propagation, multiple-access interference, near-far effect, or Doppler shifting. With regards to high-level system design, the issues to be addressed are related to the distribution of beacons, ease of deployment, and calibration and positioning algorithms, including the possible fusion of information obtained from maps and onboard sensors. Apart from theoretical discussions, this work also includes the description of an ALPS that was implemented, installed in a large area and tested for mobile robot navigation. In addition to practical interest for real applications, airborne ALPSs can also be used as an excellent platform to test complex algorithms (taking advantage of the low sampling frequency required), which can be subsequently adapted for other positioning systems, such as underwater acoustic systems or ultrawideband radio-frequency (UWB RF) systems.

The aim of this work is to propose an alternative way for wine classification and prediction based on an electronic nose (e-nose) combined with Independent Component Analysis (ICA) as a dimensionality reduction technique, Partial Least Squares (PLS) to predict sensorial descriptors and Artificial Neural Networks (ANNs) for classification purpose. A total of 26 wines from different regions, varieties and elaboration processes have been analyzed with an e-nose and tasted by a sensory panel. Successful results have been obtained in most cases for prediction and classification.

This work analyses the effect of the receiver movement on the detection by pulse compression of different families of codes characterizing the emissions of an Ultrasonic Local Positioning System. Three families of codes have been compared: Kasami, Complementary Sets of Sequences and Loosely Synchronous, considering in all cases three different lengths close to 64, 256 and 1,024 bits. This comparison is first carried out by using a system model in order to obtain a set of results that are then experimentally validated with the help of an electric slider that provides radial speeds up to 2 m/s. The performance of the codes under analysis has been characterized by means of the auto-correlation and cross-correlation bounds. The results derived from this study should be of interest to anyone performing matched filtering of ultrasonic signals with a moving emitter/receiver.

The task of determining the physical coordinates of a target in indoor environments is still a key factor for many applications including people and robot navigation, user tracking, location-based advertising, augmented reality, gaming, emergency response or ambient assisted living environments. Among the different possibilities for indoor positioning, Acoustic Local Positioning Systems (ALPS) have the potential for centimeter level positioning accuracy with coverage distances up to tens of meters. In addition, acoustic transducers are small, low cost and reliable thanks to the room constrained propagation of these mechanical waves. Waveform design (coding and modulation) is usually incorporated into these systems to facilitate the detection of the transmitted signals at the receiver. The aperiodic correlation properties of the emitted signals have a large impact on how the ALPS cope with common impairment factors such as multipath propagation, multiple access interference, Doppler shifting, near-far effect or ambient noise. This work analyzes three of the most promising families of codes found in the literature for ALPS: Kasami codes, Zadoff-Chu and Orthogonal Chirp signals. The performance of these codes is evaluated in terms of time of arrival accuracy and characterized by means of model simulation under realistic conditions and by means of experimental tests in controlled environments. The results derived from this study can be of interest for other applications based on spreading sequences, such as underwater acoustic systems, ultrasonic imaging or even Code Division Multiple Access (CDMA) communications systems.