This article presents an algebraic series-parallel (ASP) topology for fully integrated switched-capacitor (SC) dc-dc boost converters with flexible fractional voltage conversion ratios (VCRs). By elaborating the output voltage (VOUT) expression into a specific algebraic form, the proposed ASP can achieve improvements on both the charge sharing and bottom-plate-parasitic losses while maintaining the high topology and fractional VCR flexibility of conventional two-dimensional series-parallel (2DSP) converters. The proposed method consists of a generic ASP topology framework with systematic parameter determination for a precise converter implementation, and can theoretically surpass the power-conversion efficiency (PCE) of 2DSP converters. Fabricated in 65-nm bulk CMOS, we designed a fully integrated ASP-based SC rational boost converter by cascading with the Dickson topology, with a total of seven rational VCRs to boost an input voltage of 0.25-1 V to a 1-V output. Delivering a maximum loading power of 20.4 mW, the chip prototype achieves a peak efficiency of 80% at a power density of 22.7 mW/mm 2 .
27 September 2018 in IEEE Journal of Solid-State Circuits
We propose an algorithmic voltage-feed-in (AVFI) topology capable of systematic generation of any arbitrary buck-boost rational ratio with optimal conduction loss while achieving reduced topology-level parasitic loss among the state-of-the-art works. By disengaging the existing topology-level restrictions, we develop a cell-level implementation using the extracted Dickson cell (DSC) and charge-path-folding cell (QFC) to minimize the power-stage parasitic loss, exhibiting a Dickson-like switching pattern. The proposed partitionable main cell (MC) and auxiliary cell (AC) architecture achieves fined-grained voltage conversion ratio (FVCR) reconfiguration with optimal power cell utilization and reduced control complexity. Implemented in 65-nm bulk CMOS, the fully integrated switched-capacitor power converter (SCPC) using 10 MCs and 10 ACs executes a total of 24 VCRs (11 buck and 13 boost) with wide-range efficient buck-boost operations through the proposed reference-selective bootstrapping driver (RSBD). Based on the AVFI topology, the chip prototype reaches a measured peak efficiency of 84.1% at a power density of 13.4 mW/mm² over a wide range of input (0.22-2.4 V) and output (0.85-1.2 V).
Piezoelectric energy harvesters (PEH) exhibit promising features to scavenge the ambient vibration energy for ubiquitous miniaturized internet of things (IoT) devices. For the traditional PEH using a full-bridge rectifier (FBR), the inherent capacitance (C P ) limits the extractable AC-DC electrical power. By extending the damping duration, PEH interfaces employing non-linear techniques, such as the parallel-synchronized-switch harvesting-on-inductor (P-SSHI) [1], can increase the harvestable energy. However, they typically require bulky external high-Q inductors to enhance the extracted power. Recently, various inductor-less PEH interfaces exploiting only capacitors for flipping the PEH voltage during the zero-crossing of the PEH current (I P ) have been reported [2-4]. However, their achievable energy extraction improvement depends highly on the number of flipping phases. This work proposes a split-phase flipping-capacitor rectifier (SPFCR) implementation entailing only 4 capacitors, while achieving the highest number of phases (21) when compared to prior art [2-4]. To resolve the lack of input power (P in ) adaptability in [2-4], this work proposes a capacitor-reuse multiple voltage-conversion-ratio (VCR) switched-capacitor (SC) DC-DC converter to reduce the charge redistribution loss. Maximum power point tracking (MPPT) is also accomplished using the fractional FBR open circuit voltage (V OC,FBR ) for relaxed voltage tolerance, while raising the PEH extracted energy. This work demonstrates a measured 9.3× energy-extraction improvement when compared to a conventional FBR interface.
The advancement in Power Management Integrated Circuit (PMIC) has driven the DC-DC conversion technology into a System-on-Chip (SoC) solutions, leveraging CMOS technology scaling from 180nm to 22nm and on-chip passive element integration. Concurrently, as the applications demand smaller form factor solution towards device portability with optimized power qualities, switched-capacitor-inductor hybrid architectures with fully-integrated passives have become a popular choice for a compact and high efficiency converter solution, in contrast to bulky and discrete component based alternatives. This article reviews the latest advancements in hybrid dc-dc topologies, specifically for low-power applications to address the downsides such as charge sharing loss, high current ripple, limited conversion ratio, low power density and efficiency. An overview of capacitor and inductor technology is discussed in terms of on-chip parasitic losses, and miniaturization. A comprehensive comparison in the state-of-the-art hybrid dc-dc converter work is tabulated with power density and efficiency as the primary performance metrics, highlighting their operability in low-power applications. Moreover, a discussion is included with quantified benchmarks to justify the viability of converters, along with the future recommendation of realizing ultra-high switching frequency for smaller footprint inductor and design approach to resolve the current tradeoff bottlenecks.
1 October 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents an amplifier-chain-based XOR physical unclonable function (AC-XOR PUF), with the process- and/or bias-dependent voltage and amplification information of two identical amplifier chains serving as the entropy sources. The current-biased PUF cell using only 4 NMOS transistors achieves a small area with reduced temperature and supply sensitivity. Optimization on both the stage gain and stage number can reduce the input-referred noise (IRN) and improve the PUF reliability. We further employ an XOR gate to process the amplifier-chain outputs for the final response to improve the energy efficiency and uniqueness. The process- and bias-dependent stage amplification and the nonlinear amplifier-chain multiplication, which can significantly increase the number of modeling parameters and introduce a complex decision boundary respectively, can effectively resist machine learning (ML) modeling attacks. Fabricated in standard 65nm CMOS, the proposed AC-XOR PUF occupies an active area of $6845\mu \text{m}^{2}$ . Without discarding any challenge-response pairs (CRPs), this work features a measured worst case bit error rate (BER) of 5.70% across $1.06\sim 1.55V$ and $- 30\sim 125^{\circ }\text{C}$ , while demonstrating a reliability (intra-die HD) and uniqueness (inter-die HD) of 0.58% and 49.92%, respectively. It also achieves a ML prediction accuracy of 50.72% using $80\times 80\times 80$ artificial neural network (ANN) with 1M CPRs as training set.
10 April 2020 in IEEE Transactions on Electron Devices
This brief reports a small size single-photon avalanche diode (SPAD) in baseline 65-nm CMOS suitable for low-cost time-of-flight application with high spatial resolution. By exploiting the less-doped n-well region to surround the vertical p-well/deep-n-well multiplication region, the electric field at the SPAD periphery can be reduced without process modifications while avoiding premature lateral breakdown. Validated using TCAD simulations, the fabricated 4-μm diameter SPAD device exhibits a compact device size with a low dark count (73 cps/μm² at 20°C) and a high fill factor (17.7%) using 65-nm baseline CMOS, while demonstrating competitive performance when compared with the state of the art.