This paper presents a fully integrated piezoelectric energy harvesting interface without external components. Instead of relying on bulky external inductors with high quality factor as in the conventional parallel-synchronized-switch harvesting-on-inductor (P-SSHI) approach, we propose a flipping-capacitor rectifier (FCR) topology to achieve voltage inversion of the piezoelectric energy harvester through a reconfigurable capacitor array. This fundamentally preserves a fully integrated solution without inductors while achieving a high-energy extraction capability. Measurement results from FCR1 using discrete components shows an output power enhancement of up to 3.4 $\times $ , which is close to the theoretical prediction. We also fabricated a seven-phase FCR3 with four MIM capacitors and 21 switches using a 0.18- $\mu \text{m}$ 1.8/3.3/6 V CMOS process, occupying an active area of ~1.7 mm2. Additionally, we implemented an active rectifier based on a common-gate comparator with phase alignment to ensure high-speed operation while minimizing the diode voltage drop. A phase generate-and-combine circuit eliminates redundant switching activities. Systematic optimization of the three main energy loss mechanisms during the finite flip time: 1) phase offset; 2) incomplete charge transfer; and 3) reduced conduction time, is also introduced. Measurement results show that the output power enhancement can reach up to 4.83 $\times $ at an excitation frequency of 110 kHz.
7 May 2020 in IEEE Journal of Solid-State Circuits
This article proposes a split-phase flipping-capacitor rectifier (SPFCR) to resolve the hard tradeoff between the number of capacitors and the energy-extraction efficiency for capacitive piezoelectric energy-harvesting (PEH) interfaces. By splitting the capacitor usage into multiple phases, this article can achieve the most number of flipping phases using the same number of capacitors when compared with the state of the art. We also relaxed the implementation complexity by removing insignificant SFPCR flipping phases without sacrificing the energy-harvesting efficiency. To improve further the input power adaptation, the flipping capacitors are reconfigured as a multiple-voltage-conversion-ratio (MVCR) switched-capacitor dc-dc converter during the non-flipping period without using extra passives. Maximum-power-point tracking (MPPT) is also accomplished using the full-bridge rectifier (FBR) fractional open-circuit voltage (VOC, FBR) to relax the voltage-tolerance requirements. Fabricated in 0.18-μm CMOS, the proposed 21-phase SPFCR PEH interface demonstrates a measured maximum output power improving rate (MOPIR) of up to 9.3x with VD= 0.12 V (6.5x with VD= 0 V) when compared with the conventional FBR interface over an equivalent FBR input power range (Pin, FBR) from 0.15 to 5.57 μW.
8 January 2020 in IEEE Journal of Solid-State Circuits
This article presents a low-power multi-mode CMOS vision sensor with mixed-signal in-sensor computation capabilities targeting the next-generation wireless sensing applications. To support the always-on and scene-adaptive edge computing scenarios with low power and low bandwidth, the sensor is reconfigurable for three operation modes, namely: 1) motion sensing (MS); 2) object segmentation (OS); and 3) full imaging (FIM). A mixed-signal cooperative scheme of frame differencing (FD) and background subtraction (BS) is proposed to achieve high-accuracy MS with varying object sizes and speeds. The mixed-signal BS-based OS can minimize both object localizing and imaging efforts for object analysis upon motion triggering, while FIM enables complete scene recording for the identified object of interest. The complete CMOS vision sensor is implemented through reconfigurable and fully dynamic mixed-signal processing at both pixel and column levels cooperatively to achieve low power and compact area. Fabricated in a 0.18-μm CMOS, the 256 x 216 chip prototype achieves the cooperative MS with only 2.36 μW at 15 frames/s, when composed of 14 FD frames (147 nJ/frame) and 1 BS frame (302 nJ/frame). The OS mode consumes 1.44~2.04 μJ/frame at 0%~100% object occupancy, linearly corresponding to 41%~16% power saving when compared with the conventional digital OS. The FIM mode operates with only 1.41 μJ/frame for complete scene recording. The achieved energy efficiencies for all operation modes compare favorably with the state of the art.
This article presents an obfuscated-interconnection physical unclonable function (OIPUF) to resist modeling attacks. By introducing nonlinear operations through exploiting the random interconnections of delay stages, the proposed OIPUF can theoretically improve the PUF security while consuming the same hardware resources as the conventional XOR Arbiter PUF (XOR APUF). We further propose the metastability-detection (MD) arbiter to effectively improve the PUF reliability. Implemented on Xilinx Artix-7 FPGA, both the proposed (64,4)-and (64,8)-OIPUF demonstrate a good reliability and uniformity, with the proposed (64,8)-OIPUF showing a better uniqueness and strict avalanche criterion (SAC) performance. Measurement results also show that the proposed MD arbiter can reduce the bit error rate (BER) of the (64,4)-and (64,8)-OIPUF by.68 and.48 at up to 100.C, respectively. Evaluated using the Logistic Regression (LR), Artificial Neural Network (ANN), and Covariance Matrix Adaptation-Evolution Strategy (CMAES) machine learning (ML) algorithms, the proposed (64,4)-and (64,8)-OIPUF can achieve a worst case prediction accuracy of 61.47% and 50.59% with up to 10M CRPs as training set, respectively, demonstrating a significant improvement over similar prior arts.
30 July 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a switched capacitor network (SCN)-based bandgap voltage reference (BGR) circuit designed and implemented in a 65nm standard CMOS process with a wide temperature range, high precision, low supply voltage and low power consumption for IoT device application. The proposed BGR employs a 2x charge pump with ripple optimization design to supply the V_EB generator, which can relax V_DD from 0.9V to 0.5V.A proportional to absolute temperature (PTAT) current source is proposed to bias the PNP BJT in order to reduce the nonlinearity of V_EB. Moreover, a voltage divider SCN with low leakage consideration to form the complementary to absolute temperature (CTAT) voltage is designed to reduce the nonlinearity of its coefficient, while a series-parallel SCN with adjusted clock swing to form the PTAT voltage is designed to improve the line regulation of the BGR. The measurement result shows that the proposed BGR has a temperature coefficient (TC) of 42 ppm/°C at 0.5V supply within - 40 °C to 120 °C. The line regulation is 3.2mV/V or 0.64%/V from 0.5V to 1V. Based on 6-chip test result, it shows a 3σ /μ variation of 3.08% before trimming, while 0.36% after trimming.
5 September 2019 in IEEE Journal of Solid-State Circuits
This article presents an algebraic series-parallel (ASP) topology for fully integrated switched-capacitor (SC) dc-dc boost converters with flexible fractional voltage conversion ratios (VCRs). By elaborating the output voltage (VOUT) expression into a specific algebraic form, the proposed ASP can achieve improvements on both the charge sharing and bottom-plate-parasitic losses while maintaining the high topology and fractional VCR flexibility of conventional two-dimensional series-parallel (2DSP) converters. The proposed method consists of a generic ASP topology framework with systematic parameter determination for a precise converter implementation, and can theoretically surpass the power-conversion efficiency (PCE) of 2DSP converters. Fabricated in 65-nm bulk CMOS, we designed a fully integrated ASP-based SC rational boost converter by cascading with the Dickson topology, with a total of seven rational VCRs to boost an input voltage of 0.25-1 V to a 1-V output. Delivering a maximum loading power of 20.4 mW, the chip prototype achieves a peak efficiency of 80% at a power density of 22.7 mW/mm 2 .