For managing the freshwater in the worldwide coastal aquifers, it is imperative to understand the hydrogeochemical processes and flow patterns in the mixing freshwater/saltwater zone. The Egyptian Nile Delta aquifer is a typical example. The management of seawater intrusion (SWI) requires detailed investigations of the intrusion wedge and the dynamic processes in the mixing zone. Thus, a multidisciplinary approach was applied based on holistic hydrogeochemical, statistical analysis, and DC resistivity measurements to investigate the lateral and vertical changes in groundwater characteristics undergoing salinization stressor. The results of cross plots and ionic deviations of major ions, hydrochemical facies evolution diagram (HFE-D), and seawater mixing index (SMI) were integrated with the resistivity results to show the status of the SWI where the intrusion phase predominates in ~2/3 of the study are (~70 km radius) and the compositional thresholds of Na, Mg, Cl, and SO₄ are 600, 145, 1200, and 600 mg/L, respectively, indicating that the wells with higher concentrations than these thresholds are affected by SWI. Moreover, the results demonstrate the efficiency of combining hydrogeochemical facies from heatmap and resistivity investigations to provide a large-scale characterization of natural and anthropogenic activities controlling aquifer salinization to support decision-makers for the long-term management of coastal groundwater.

Among all geophysical techniques, electrical resistivity and magnetic surveying as an integrative approach has been used widely for archaeological prospection at different scales of investigations. In this study, DC resistivity (1D vertical sounding and/2D/3D ERT) and magnetic surveys (total and gradient) as a multi-scale approach was applied in a highly terraneous archaeological site (Tell) with a case study to characterize and image the various archaeological assets at different depths with different spatial resolutions. Four critical zones of great interest within the considered Tell were surveyed. At the heart of the study area, three layers were depicted clearly from 1D resistivity sounding. A thick conductive zone of mostly clay is sandwiched between two resistive layers. The topmost layer contains construction debris (dated back to the Islamic Era), whereas the deeper layer could be related to Gezira sand on which the probable Pharaonic temple was constructed. A long 2D ERT profile using Wenner Beta (WB) and Dipole–Dipole (DD) arrays with a 5-m electrode spacing identified shallow high resistivity anomalies that could be related to construction ruins from fired bricks. Additionally, it succeeded in imaging the turtleback-shaped deeper resistive layer of mostly sand. At an elevated rim to the east and west of the Tell, total and vertical magnetic gradient maps clearly delineated different archaeological structures: the walls of the rooms of ancient Islamic settlers and the walls of water tanks from the Byzantine Era. Magnetic modeling assuming 2.5-dimensional magnetic models constrained by the 2D ERT inversion models could be used to create a realistic representation of the buried structures. Toward the northern part of the Tell, the joint application of the quasi-3D ERT inversion scheme and the magnetic survey revealed an anomaly of a well-defined geometric shape of an archaeological interest thought to be a crypt or water cistern based on nearby archaeological evidence. The overall results of the geophysical survey integrated with the image of some partially excavated parts provided the archaeologists with a comprehensive and realistic view of the subsurface antiquities at the study area.

The estimation of the Curie point depth (CPD) and heat flow (HF) from magnetic data is useful for geothermal and tectonic studies. However, the methodology of estimating these values is still controversial as numerous studies have used different types of transformed magnetic data. Most studies utilize the total magnetic intensity (TMI) or the reduced to the pole (RTP) data, and since shallow magnetic bodies may affect the final CPD values, low-pass (LP) wavelength filtering has also been used to estimate the CPD. In this study, the two-dimensional radially averaged spectral analysis was applied to the land-based magnetic data from the Sinai Peninsula. TMI and RTP data were both analyzed, using different LP filtered wavelengths, and the final CPD and HF values were compared. The cut-off wavelength parameter was selected in terms of the geologic complexity. The results show that the estimated CPD values are well correlated regardless of whether the magnetic data were either TMI or RTP. The RTP data produced a spatial shift in the CPD smaller than the window size being used. Additionally, the centroid method is primarily dependent on the wavenumber, which varied slightly on applying the RTP. There were slight differences in the estimated CPDs when a short LP filter (e.g., 20 km) was applied, whereas increasing the wavelength (e.g., 40 km) caused the CPD values to increase exceeding the plausible depth limits, and the associated spatial trends varied when compared to the other methods. In areas where the basement rocks were shallow or exposed, a LP filter can be applied with short cut-off wavelength. The estimated CPDs were discussed in the context of seismicity data, gravity-based Moho depths, and HF measurements.

Tell Dibgou, northeastern Nile Delta (Egypt), is a typical type of complex archaeological site that contains ruins from different chronological periods (Pharaonic, Byzantine, Greece-Roman and Islamic), as evidenced by the findings of pottery kilns, pottery shards, fired brick and colored glass. This study aims to image the topmost archaeological layer of Islamic architecture using electrical resistivity tomography and land-based magnetic surveys. Two nearby areas in the northern part of Tell Dibgou were investigated; the first was surveyed using resistivity tomography and magnetics, and the second used total-field and vertical magnetic gradients. Several electrode arrays (dipole–dipole, Wenner Beta, Wenner Schlumberger and pole–dipole) were tested to select the one that provides better resolution. Two inversion schemes were applied where the smoothness-constrained inversion smeared and blurred the archaeological boundaries, and the robust inversion produced models with well-defined and sharp edges. The vertical extent of the topmost archaeological layer of Islamic settlers was imaged using the electrical resistivity tomography; however, the presence of slag debris, collapsed bricks, and pottery shards at shallow depths complicated the discrimination of the closest walls. The interpretation of magnetic data (total and vertical gradients) in terms of depth and geometry was executed using semi-automated techniques such as three-dimensional, Euler deconvolution and tilt angle derivative. The geometry of archaeological targets is interpreted to be closed rooms, water tanks and corridors constructed from fired brick walls filled with clay sediments. The depths yielded from both techniques are comparable and range from >1 m to up to 2 m.