Compounding natural additives with synthetic polymers allows developing more eco-friendly materials with enhanced biodegradability. The composite films based on low-density polyethylene (PE) with different content of natural rubber (NR) (10–30 wt%) were investigated. The influence of NR content on structural features, water absorption and mechanical properties of the composites were studied. The 70PE/30NR composite is characterized by the uniform distribution and the smallest size of NR domains (45 ± 5 μm). A tensile test was satisfied by the mechanical properties of the biocomposites, caused by elasticity of NR domains. The tensile strength of 70PE/30NR composite film is 5 ± 0.25 MPa. Higher water absorption of PE/NR composites (1.5–3.7 wt%) compared to neat PE facilitates penetrating vital activity products of microorganisms. Mycological test with mold fungi and full-scale soil test detected the composite with 30 wt% of NR as the most biodegradable (mass loss was 7.2 wt% for 90 days). According to infrared spectroscopy and differential scanning calorimetry analysis, NR consumption and PE structural changes in the biocomposites after exposure to soil occurred. The PE/NR composites with enhanced biodegradability as well as satisfied mechanical and technological properties have potential applications in packaging and agricultural films.

Due to the current environmental situation, biopolymers are replacing the usual synthetic polymers, and special attention is being paid to poly-3-hydroxybutyrate (PHB), which is a biodegradable polymer of natural origin. In this paper, the rate of biodegradation of films and fibers based on PHB was compared. The influence of exposure to soil on the structure and properties of materials was evaluated using methods of mechanical analysis, the DSC method and FTIR spectroscopy. The results showed rapid decomposition of the fibrous material and also showed how the surface of the material affects the rate of biodegradation and the mechanical properties of the material. It was found that maximum strength decreased by 91% in the fibrous material and by 49% in the film. Additionally, the DSC method showed that the crystallinity of the fiber after exposure to the soil decreased. It was established that the rate of degradation is influenced by different factors, including the surface area of the material and its susceptibility to soil microorganisms. The results obtained are of great importance for planning the structure of features in the manufacture of biopolymer consumer products in areas such as medicine, packaging, filters, protective layers and coatings, etc. Therefore, an understanding of the biodegradation mechanisms of PHB could lead to the development of effective medical devices, packaging materials and different objects with a short working lifespan.

Recently, environmental problems caused by the overproduction and consumption of synthetic polymer materials led to an urgent need to develop efficient methods for processing plastics. The accumulation of polymer waste for their subsequent incineration does not solve the problem due to the limited areas of landfills for waste storage. In addition, the incineration of polymer waste can cause toxic air pollution, which, in turn, does not contribute to an improvement in the environmental situation. Recycling plastics, although a more environmentally friendly waste disposal method, requires significant labor and energy costs and can be performed a limited number of times. Thus, the most promising solution to this problem is the creation of biodegradable polymers capable of degradation with the formation of simpler chemical structures (water, carbon dioxide, biomass, etc.), which are easily included in the metabolic processes of natural biological systems. The article provides an overview of the main trends in the creation of biodegradable composites for the needs of agriculture. Also, the article proposes a new composition based on polyethylene with natural rubber that surpasses existing biodegradable materials in a number of physical and mechanical characteristics and has the ability to complete biodegradation in 60 months. It is shown that the studies carried out to date indicate that these composites are highly promising for the creation of biodegradable packaging materials with good performance characteristics. Thus, it was concluded that further research on composites based on polyethylene and natural rubber is important.

Electrospun fabrics have unique properties due to their uniform morphology and high surface area to volume ratio. Ultrathin nonwoven fabrics are produced for many applications: biomedical, nanosensors, tissue engineering and filtration systems. In this work, nonwoven polylactide, polylactide/natural rubber, poly-3-hydroxybutyrate, and poly-3-hydroxybutyrate/nitrile butadiene rubber fabrics were prepared by electrospinning methods. The obtained fabric samples were used as substrates for the growth of winter wheat seeds “Yubileinaya 100” (Triticum aestivum L.). The stimulating effect of polymer substrates on seed germination and plant growth was shown. The structure and properties of nonwoven agromaterials were controlled by differential scanning calorimetry, IR-spectroscopy, and optical microscopy. The mechanical properties of the obtained fabrics before and after their utilization as substrates were studied. After the wheat growing experiment, the degree of crystallinity of PHB and PHB/NBR samples decreased by 12% and they completely lost their mechanical properties. It is shown that the main factors providing the efficiency of seed growth technology on polymer substrates are the chemical nature and structure of the biodegradable matrix.

The effect of the hemin (Hmi) on the structure and properties of nanocomposite electrospun materials based on poly-3-hydroxybutyrate (PHB) is discussed in the article. The additive significantly affected the morphology of fibers allowed to produce more elastic material and provided high antimicrobial activity. The article considers also the impact of the hemin on the biocompatibility of the nonwoven material based on PHB and the prospects for wound healing.

The creation of innovative fibrous materials based on biodegradable semicrystalline polymers and modifying additives is an urgent scientific problem. In particular, the development of biomedical materials based on molecular complexes and biopolymers with controlled properties is of great interest. The paper suggests an approach to modifying the structure and properties of the composite materials based on poly(3-hydroxybutyrate) (PHB) obtained by the electrospinning method using molecular complexes of hemin. The introduction of 1–5 wt. % of hemin has a significant effect on the supramolecular structure, morphology and properties of PHB-based fibers. Changes in the supramolecular structure intensified with the increasing hemin concentration. On the one hand, a decrease in the fraction of the crystalline phase by 8–10% was observed. At the same time, there is a decrease in the density of the amorphous phase by 15–70%. Moreover, the addition of hemin leads to an improvement in the strength characteristics of the material: the elongation at break increased by 1.5 times, and in the tensile strength, it increased by 3 times. The antimicrobial activity of the hemin-containing composite materials against Escherichia coli and Staphylococcus aureus was confirmed. The obtained materials are proposed to be used in the creation of composite systems for regenerative medicine.