The article aims to determine the effect of cement addition on the water vapour resistance factor of stabilized rammed earth. Literature analysis indicates that different earthen materials show large differences in water vapour resistance factor values. The high diffusion resistance of concrete concerning other construction materials suggests that cement will be one of the factors significantly affecting these values. The paper presents water vapour resistance factor test results of rammed earth with various soil particle sizes and cement contents. The obtained results showed that an increase of cement addition increases the diffusion resistance of the material. However, the diffusion resistance of cement stabilized rammed earth is still low compared to concrete.
Hemp-lime composites, characterized by pro-environmental features, offer an interesting alternative to traditional building materials. The properties of these materials depend on many factors, leading to uncertainty regarding the results obtained when designing building envelopes. Volumetric density—a key factor—depends on the manufacturing technique adopted, among other things, and can be controlled. In this study, materials for use in partitions constituting the building envelope were produced at various densities through varying degrees of compression and subjected to tests to determine their compressive strength, thermal conductivity and water vapor permeability. The values obtained were in the wide ranges of 0.05–1.50 MPa, 0.0671–0.1339 W/(m∙K) and 3.61–10.10, respectively. Furthermore, the specific heat was determined to be 1178–1260 at 60 °C and 773–863 J/(kg∙K) at 30 °C. The test results clearly indicate the dependence of the tested properties on the mixture composition, volumetric density and composite structure. The results of this study demonstrate the suitability of the considered material for construction applications and the significant variations in its properties. Understanding the relationships between the properties of different composites and their degree of compaction can facilitate the design process and help in modeling the mechanical and thermal behaviors of partitions and entire buildings.
This study investigates the effect of hemp shive granulometry on the thermal conductivity and microstructure of hemp–lime composites. Three distinct particle size fractions—fine, medium, and coarse—were characterized using high-resolution image analysis to determine geometric parameters such as Feret diameters, circularity, and elongation. Composite mixtures with varying binder-to-shive and water-to-shive ratios were prepared and compacted at a consistent level to isolate the influence of aggregate granulometry on thermal performance. Results demonstrate a clear inverse relationship between particle size and thermal conductivity, with coarse fractions reducing thermal conductivity by up to 7.6% compared to fine fractions. Composite density was also affected, decreasing with increasing particle size, confirming the impact of granulometry on pore structure and packing density. However, binder content exhibited the most significant effect on thermal conductivity, with a 20% increase observed for higher binder-to-shive ratios irrespective of shive size. The study further establishes that a 15 g sample size (~2400 particles) provides sufficient statistical accuracy for granulometric characterization using image analysis. These findings provide critical insights for optimizing hemp–lime composites for enhanced thermal insulation performance, supporting sustainable construction practices by informing material formulation and processing parameters.
The determination of compressive strength of hemp–lime composite (HLC) is currently based on diverse and non-unified approaches, which complicates the direct comparison of results obtained in different studies. This study compares commonly used strength-determination methods using a dedicated experimental dataset and proposes a new, more universal approach, defining compressive strength as the stress corresponding to 1% permanent strain. Cubic specimens (150 × 150 × 150 mm) were produced at three compaction levels (150%, 170%, 190%) and tested under uniaxial compression. Increasing compaction increased density and resulted in compressive strengths of 219, 316, and 349 kPa, respectively. Methods based on fixed strain levels (5% and 10%) showed good repeatability but primarily reflected serviceability limits, whereas those based on loss of linearity or stiffness reduction were less reliable and highly sensitive to curve interpretation. The proposed 1% permanent-strain method accurately captured the onset of irreversible deformation and aligned with the real behavior of hemp–lime infill in frame structures, supporting its use for standardizing compressive-strength testing of hemp–lime composites.
Hemp–lime composites are bio-based building materials with carbon sequestration potential, yet their properties exhibit significant variability depending on manufacturing variables, and standardized production guidelines remain lacking. This study investigates the influence of water-to-binder ratio (W/B = 1.75, 1.95, 2.15) and compaction degree (CD = 150%, 170%, 190%) on the thermal conductivity and compressive strength of hemp–lime composites using a full 3 × 3 factorial design at a binder-to-shiv ratio of B/S = 1:1. Results were synthesized with previously published investigations from a systematic research programme, enabling a comparative assessment of four technological variables across an extended dataset spanning densities from 227 to 518 kg/m3. The binder-to-shiv ratio was identified as the dominant factor governing both properties, primarily through its effect on bulk density and the mechanical character of the composite. Compaction degree was the most effective parameter for adjusting properties within a fixed mix design, with the strongest gains observed at the transition from CD = 150% to CD = 170%. The water-to-binder ratio exerted only marginal influence on bulk density and thermal conductivity, while its effect on compressive strength remained inconclusive at B/S = 1:1. Hemp shive particle size had a limited effect on thermal conductivity and no detectable influence on compressive strength. Both properties exhibited strong positive linear relationships with bulk density across the extended dataset. The findings support the standardization of hemp–lime composite production and the development of practical design guidelines.