Gallium is incorporated into the strain-balanced In(Ga)As/InAsSb superlattice system to achieve the same mid-wave infrared cutoff tunability as conventional Ga-free InAs/InAsSb type-II superlattices, but with an additional degree of design freedom to enable optimization of absorption and transport properties. Time-resolved photoluminescence measurements of InGaAs/InAsSb superlattice characterization- and doped device structures are reported from 77 to 300 K and compared to InAs/InAsSb. The low-injection photoluminescence decay yields the minority carrier lifetime, which is analyzed with a recombination rate model, enabling the determination of the temperature-dependent Shockley–Read–Hall, radiative, and Auger recombination lifetimes and extraction of defect energy levels and capture cross section defect concentration products. The Shockley–Read–Hall-limited lifetime of undoped InGaAs/InAsSb is marginally reduced from 2.3 to 1.4 μs due to the inclusion of Ga; however, given that Ga improves the vertical hole mobility by a factor of >10×, a diffusion-limited InGaAs/InAsSb superlattice nBn could expect a lower bound of 2.5× improvement in diffusion length with significant impact on photodetector quantum efficiency and radiation hardness. At temperatures below 120 K, the doped device structures are Shockley–Read–Hall limited at 0.5 μs, which shows promise for detector applications.
Autonomous experimentation has emerged as an efficient approach to accelerate the pace of material discovery. Although instruments for autonomous synthesis have become popular in molecular and polymer science, solution processing of hybrid materials, and nanoparticles, examples of autonomous tools for physical vapor deposition are scarce yet important for the semiconductor industry. Here, we report the design and implementation of an autonomous workflow for sputter deposition of thin films with controlled composition, leveraging a highly automated sputtering reactor custom-controlled by Python, optical emission spectroscopy (OES), and a Bayesian optimization algorithm. We modeled film composition, measured by x-ray fluorescence, as a linear function of plasma emission lines monitored during co-sputtering from elemental Zn and Ti targets in an N2 and Ar atmosphere. A Bayesian control algorithm, informed by OES, navigates the space of sputtering power to fabricate films with user-defined compositions by minimizing the absolute error between desired and measured optical emission signals. We validated our approach by autonomously fabricating ZnxTi1−xNy films that deviate from the targeted cation composition by a relative ±3.5%, even for 15 nm thin films, demonstrating that the proposed approach can reliably synthesize thin films with a specific composition and minimal human interference. Moreover, the proposed method can be extended to more difficult synthesis experiments where plasma intensity lines depend non-linearly on pressure, or the elemental sticking coefficients strongly depend on the substrate temperature.
A band-structure engineering approach is proposed to use semiconductor alloys such as SixGe1−x−ySny with a direct bandgap slightly above the indirect fundamental bandgap to demonstrate momentum(k)-space carrier separation of photogenerated carriers in photodetectors to reduce dark current. This approach combines the large absorption coefficient of direct-gap semiconductors with the long carrier lifetime of indirect gap semiconductors and reduces tunneling current due to the large effective masses of the indirect valleys. When the difference of the direct and indirect bandgaps (i.e., the energy difference between the direct and indirect valleys) varies from 0.4 to 3kBT, the direct-bandgap absorption covers a wide wavelength range from 2 to 22 μm for those alloys lattice matched to GeSn virtual substrates and to various commercially available substrates. The same approach can be adopted for other material systems.
29 January 2024 in Journal of Materials Chemistry A
The growth of Bi-containing III-V alloys requires careful control over temperature and group-V fluxes due to the low equilibrium solubility of Bi and its tendency to surface segregate into Bi-rich droplet features. A model for molecular beam epitaxy growth based on the kinetics of atomic desorption, incorporation, surface accumulation, and droplet formation is applied to the bismide alloy InAsSbBi grown on GaSb substrates. A steady-state solution is derived for the Bi, Sb, and As mole fractions and surface layer coverages based on the Bi, Sb, and As fluxes. A nonlinear least-squares algorithm is used to fit the growth model parameters to experimentally measured Bi mole fractions in bulk and quantum well InAsSbBi samples grown at 400 °C and 420 °C. The Bi mole fraction ranges from 0.12% to 1.86% among 17 samples examined. The results indicate that as the growth temperature increases, the rate of Bi incorporation decreases and the rate of Bi self-desorption increases. A strong interaction is observed between Bi and As that plays a role in the desorption of excess Bi from the growth surface, thus reducing the likelihood of Bi-rich droplet formation when an excess As flux is present. Significantly, the model predicts that the incorporation of Bi is limited to mole fractions of 1.43% at 400 °C and 0.30% at 420 °C in lattice-matched bulk InAsSbBi grown on GaSb substrates.
We have epitaxially stabilized a series of monoclinic (AlxGa1−x−yIny)2O3 alloys by careful choice of molecular beam epitaxy growth conditions, which balance alloy growth with suboxide desorption. The films are pseudomorphic to (010) β-Ga2O3 substrates at thicknesses up to 150 nm with compositions ranging from (Al0.01Ga0.83In0.16)2O3 to (Al0.24Ga0.75In0.03)2O3. The absorption edge shifts from approximately 4.62–5.14 eV with coincidently increasing Al and decreasing In mole fractions. J–V measurements reveal an increase in resistivity over four orders of magnitude with a maximum value of 4.2 × 105 Ω-cm for (Al0.17Ga0.76In0.07)2O3, which has nearly identical lattice parameters (both in-plane and out-of-plane) to the underlying β-Ga2O3. Scanning transmission electron microscopy of this sample reveals a mostly uniform and single crystalline film, though we identify areas of non-uniform In incorporation and some γ-phase inclusions. This work demonstrates the feasibility of thick layers lattice-matched to β-Ga2O3 with increased bandgap compared to phase-separation limited (Al,Ga)2O3. These alloys can enable higher bandgap epitaxial dielectrics and high sheet charge density transistors by increasing the conduction band offset with respect to β-Ga2O3.