Emine Gündoğdu Iş

Dr. Emine Gündoğdu Iş


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2021 in Journal of Laser Applications
Verified
Journal Article
Closed access
PDF file
EIEmine Gündoğdu Iş
Emine Gündoğdu Iş
MYMuharrem Yılmaz
Muharrem Yılmaz
In this study, a 6 mm-thick 6061 T6 aluminum alloy was welded using fiber laser welding, and its mechanical and metallurgical properties were investigated. Full penetration autogenous welds were made at a constant laser power of 4.95 kW using a continuous-wave fiber laser and focal positions of −4 mm. In addition, the shielding gas content was changed for weldments welded at different travel speeds (mm s−1). Accordingly, welding speeds were 50, 40, 35, 25, and 20 mm s−1, and the shielding gas contents were 100% argon (Ar), 10% helium (He) + 90% Ar, 30% He + 70% Ar, 50% He + 50% Ar, and 75% He + 25% Ar. Then, macro and micro images were taken, and some mechanical properties (hardness, tensile test, and bending test) were examined. As a result, the change in shielding gas content and welding speed has provided significant variations in the welding joints. Decreases in mechanical properties were detected due to the coarsening of the precipitates. On the other hand, the narrowness of the weld seam and HAZ obtained in laser welding, compared to traditional welding methods, minimizes this disadvantage.

23 August 2023 in Materials Testing
Verified
Journal Article
Closed access
EIEmine Gündoğdu Iş
Emine Gündoğdu Iş
KKKadir Koçak
Kadir Koçak
ZBZeynep Sueda Basar
Zeynep Sueda Basar
YYYağızer Yavuz
Yağızer Yavuz
PTPolat Topuz
Polat Topuz
In this study, Al 6061 T6 alloy was joined by friction stir welding method with the same parameters using with different profiled pins. As a result of the experiments carried out, the samples were subjected to metallographic examination, hardness measurements, tensile test and bending test. As a result of the examinations carried out, changes in welding performances were determined with the change of pin profiles. As a result of these changes, it was determined that the pin profile suitable for the applied welding parameters was pyramid. It has been concluded that in the use of triangular profile pins, the welding parameters in question should be higher, and the most important reason for this is that the stir zone is larger.

1 January 2017 in Hittite Journal of Science and Engineering
Verified
Journal Article
Open access
PDF file
BCBunyamin Cicek
Bunyamin Cicek
EIEmine Gündoğdu Iş
Emine Gündoğdu Iş
Emre GümüşEmre Gümüş
Emre Gümüş
PTPolat Topuz
Polat Topuz
The Welding Science of X20CrMoV11-1 Steels Depending on Various Welding Positions

22 June 2023 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
EIEmine Gündoğdu Iş
Emine Gündoğdu Iş
ŞAŞ. Hakan Atapek
Ş. Hakan Atapek
MYMuharrem Yılmaz
Muharrem Yılmaz
In this study, EN AW 6061-T6 Al alloy having a thickness of 6 mm was joined with a 5000 W fiber laser welding machine using different welding speeds (20, 25, and 35 mm/s) and shielding gas compositions (100% Ar, % 50 Ar + % 50 He, % 25 Ar + 75 He). In order to reduce the strength decrease in the weld zone, 5356 filler metal with a diameter of 1.2 mm was used with the cold wire feeding method at a constant speed of 2 m/min. Structural analyses of the joints were performed by macroscopic and microscopic examination, and hardness profiles and strength values of the joints were determined by mechanical tests. The findings showed that (i) the width of the seam increased due to the increase in the amount of He in the gas composition, and the number of pores decreased accordingly, (ii) although no significant change was observed in the hardness profiles, the highest tensile strength value (242 MPa) was obtained using a gas composition of 50% He + 50% Ar and welding speed of 20 mm/s, (iii) shear failure was the dominant fracture, and the porosities played a decisive role in the fracture.

10 November 2026 in Metals
Verified
Journal Article
Open access
PDF file
RRRahool Rai
Rahool Rai
Mohsin SattarMohsin Sattar
Mohsin Sattar
EIEmine Gündoğdu Iş
Emine Gündoğdu Iş
Jan HošekJan Hošek
Jan Hošek
RHRóbert Huňady
Róbert Huňady
Muhammad MuzamilMuhammad Muzamil
Muhammad Muzamil
Creep testing is essential for characterizing the time-dependent deformation of engineering materials, but conventional testing systems can be costly and complex, limiting their use in teaching laboratories and small-scale research facilities. This study presents the design, fabrication, and experimental validation of a low-cost spring-loaded tensile creep testing apparatus developed for educational applications and preliminary material investigations. The apparatus was designed in SolidWorks and fabricated using locally available components, with a calibrated spring mechanism providing sustained tensile loading while minimizing system complexity and energy consumption. Its performance was evaluated through 120 h tensile creep tests on nylon, unplasticized polyvinyl chloride (UPVC), lead, and medium-density polyethylene (MDPE) under ambient conditions of 29–33 °C and 60–65% relative humidity, following the general recommendations of ASTM E139-11 and ISO 204. The measured creep strains after 120 h were 10.92%, 6.08%, 10.00%, and 4.00% for nylon, UPVC, lead, and MDPE, respectively, compared with theoretical values of 11%, 5%, 9.16%, and 3.006%. The corresponding relative errors were 0.7%, 21.6%, 9.2%, and 33.1%. The observed deformation responses exhibited characteristic creep behaviour, demonstrating the apparatus’s ability to capture time-dependent deformation across materials with different mechanical characteristics. The discrepancies between experimental and theoretical results, particularly for UPVC and MDPE, highlight the influence of material variability, nonlinearity, environmental conditions, and the absence of replicate measurements. Although the developed apparatus reliably captures basic creep behavior and distinguishes material trends, ambient thermal variations and baseline sensor drift limit its measurement precision. Consequently, while the platform is well-suited for hands-on instruction and initial material screening, rigorous sensor calibration, environmental shielding, and statistical replication remain mandatory before the generated data can support safety-critical engineering applications.

3 July 2025 in Materials Testing
Verified
Journal Article
Closed access
EIEmine Gündoğdu Iş
Emine Gündoğdu Iş
MYMuharrem Yılmaz
Muharrem Yılmaz
In this study, 6061 T6 aluminum alloy (AlMg1SiCu) was welded using the laser welding method with E Al 4043 (AlSi 5) filler wire. The shielding gas composition and welding parameters were varied, and the joints were welded at different welding speeds. The metallurgical and mechanical properties of the welded joints were analyzed. The results showed that joints welded at the highest speed of 35 m s−1 exhibited the highest tensile strength. Furthermore, it was observed that as the amount of helium in the shielding gas composition increased, the number of pores in the weld seam decreased, while the weld seam width increased.