This paper deals with the description, measurement, and use of electromagnetic properties of ferromagnetic fibres used as dispersed fibre reinforcement in composite mixtures. Firstly, the fibres’ magnetic properties are shown, and a method of measuring the hysteresis loop of fibres is proposed. The results from the measurements are presented and a discussion of the influence of measured parameters on the fibres’ orientation in a magnetic field is performed. Furthermore, methods of non-destructive estimation, of their amount and orientation in the composite specimens, are discussed. The main experimental goal of this paper is to show the relationship between this non-destructive method’s results and the destructive flexural strength measurements. The method is sensitive enough to provide information related to fibre reinforcement.

We show that two-terminal multijunction cells interconnected by tunnel junctions are fairly immune to individual local shunts, thanks to the shunt quenching. Interestingly, they may still suffer from global shunts. We revise the paradigm of a multijunction cell as a simple serial connection of component cells. This paradigm remains valid only for multijunction cells with laterally conductive interlayers. Instead, a new equivalent circuit is proposed and verified by measurement and simulations. As a main approach, selective illumination is applied and the voltage is measured at the end terminals. The global shunt is seen as a shift from logarithmic to linear intensity response. The presence of tunnel junction is important for an optimum configuration of tandem structures such as metal-halide perovskite with crystalline silicon solar cell.

The efficiency of fibre reinforcement in concrete can be drastically increased by orienting the fibres using a magnetic field. This orientation occurs immediately after pouring fresh concrete when the fibres can still move. The technique is most relevant for manufacturing prefabricated elements such as beams or columns. However, the parameters of such a field are not immediately apparent, as they depend on the specific fibre reaction to the magnetic field. In this study, a numerical model was created in ANSYS Maxwell to examine the mechanical torque acting on fibres placed in a magnetic field with varying parameters. The model consists of a single fibre placed between two Helmholtz coils. The simulations were verified with an experimental setup as well as theoretical relationships. Ten different fibre types, both straight and hook-ended, were examined. The developed model can be successfully used to study the behaviour of fibres in a magnetic field. The fibre size plays the most important role together with the magnetic saturation of the fibre material. Multiple fibres show significant interactions.

This paper explores the practical possibility of using a magnetic field to orient steel fibres in a fresh concrete matrix. This process leads to...

This study investigates fiber content and orientation in prefabricated slab elements made of ultra-high-performance fiber-reinforced concrete (UHPFRC), using novel non-destructive measurement using a coil’s quality factor, where the coil is put to one side of the specimen only. This allows the analysis of slab specimens of arbitrary size. That then allows an accurate quality control of elements made in the prefabrication industry. This study presents an experimental campaign designed to evaluate the non-destructive principle’s accuracy and practical feasibility. Twenty-five large slab specimens were made in an industrial prefabrication plant using various casting methods to introduce different flow-induced fiber parameters. The slabs were subjected to this non-destructive testing, then destructive bending tests and CT scanning to tie the results together and validate the non-destructive results. The results showed that the coil’s quality factor values correspond well to the distribution (concentration) and orientation of fibers, and the method reliably reveals potential defects of the material and can predict the element’s mechanical properties.