Dynamic polarization control is crucial for emerging highly integrated photonic systems with diverse metasurfaces being explored for its realization, but efficient, fast, and broadband operation remains a cumbersome challenge. While efficient optical metasurfaces (OMSs) involving liquid crystals suffer from inherently slow responses, other OMS realizations are limited either in the operating wavelength range (due to resonances involved) or in the range of birefringence tuning. Capitalizing on our development of piezoelectric micro-electro-mechanical system (MEMS) based dynamic OMSs, we demonstrate reflective MEMS-OMS dynamic wave plates (DWPs) with high polarization conversion efficiencies (∼75%), broadband operation (∼100 nm near the operating wavelength of 800 nm), fast responses (<0.4 milliseconds) and full-range birefringence control that enables completely encircling the Poincaré sphere along trajectories determined by the incident light polarization and DWP orientation. Demonstrated complete electrical control over light polarization opens new avenues in further integration and miniaturization of optical networks and systems.
Exceptional points (EPs), unique junctures in non-Hermitian open systems where eigenvalues and eigenstates simultaneously coalesce, have gained notable attention in photonics because of their enthralling physical principles and unique properties. Nonetheless, the experimental observation of EPs, particularly within the optical domain, has proven rather challenging because of the grueling demand for precise and comprehensive control over the parameter space, further compounded by the necessity for dynamic tunability. Here, we demonstrate the occurrence of optical EPs when operating with an electrically tunable non-Hermitian metasurface platform that synergizes chiral metasurfaces with piezoelectric MEMS mirrors. Moreover, we show that, with a carefully constructed metasurface, a voltage-controlled spectral space can be finely tuned to access not only the chiral EP but also the diabolic point characterized by degenerate eigenvalues and orthogonal eigenstates, thereby allowing for dynamic topological phase transition. Our work paves the way for developing cutting-edge optical devices rooted in EP physics and opening uncharted vistas in dynamic topological photonics.
The research field of metasurfaces has attracted considerable attention in recent years due to its high potential to achieve flat, ultrathin optical devices of high performance. Metasurfaces, consisting of artificial patterns of subwavelength dimensions, often require fabrication techniques with high aspect ratios (HARs). Bosch and Cryogenic methods are the best etching candidates of industrial relevance towards the fabrication of these nanostructures. In this paper, we present the fabrication of Silicon (Si) metalenses by the UV-Nanoimprint Lithography method and cryogenic Deep Reactive Ion Etching (DRIE) process and compare the results with the same structures manufactured by Bosch DRIE both in terms of technological achievements and lens efficiencies. The Cryo- and Bosch-etched lenses attain efficiencies of around 39% at wavelength λ = 1.50 µm and λ = 1.45 µm against a theoretical level of around 61% (for Si pillars on a Si substrate), respectively, and process modifications are suggested towards raising the efficiencies further. Our results indicate that some sidewall surface roughness of the Bosch DRIE is acceptable in metalense fabrication, as even significant sidewall surface roughness in a non-optimized Bosch process yields reasonable efficiency levels.
Tunable metasurfaces promise to enable adaptive optical systems with complex functionalities. Among possible realizations, a recent platform combining microelectromechanical systems (MEMS) with gap-surface plasmon (GSP) metasurfaces offers high modulation efficiency, broadband operation, and fast response. We compare tunable metasurfaces operating in GSP and Fabry-Pérot (FP) regions by investigating polarization-independent blazed gratings both numerically and experimentally. Peak efficiency is calculated to be ∼75% in both cases (∼40% in measurements), while the operation bandwidth is found larger when operating in the GSP region. Advantages of operating in the FP region include relaxed assembly requirements and operation tolerances. Additionally, simulation and experimental results show that coupling between neighboring unit cells increases for larger air gaps, resulting in deteriorated efficiency. We believe the presented analysis provides important guidelines for designing tunable metasurfaces for diverse applications in miniaturized adaptive optical systems.
Compared to conventional lasers limited to generating static modes, mode-switchable lasers equipped with adjustable optics significantly enhance the flexibility and versatility of coherent light sources. However, most current approaches to achieving mode-switchable lasers depend on conventional, i.e., inherently bulky and slow, optical components. Here, we demonstrate fiber lasers empowered by electrically actuated intracavity microelectromechanical system (MEMS)–based optical metasurface (MEMS-OMS) enabling mode switching between fundamental Gaussian and vortex modes at ~1030 nm. By finely adjusting the voltage applied to the MEMS mirror, high-contrast switching between Gaussian ( l = 0) and vortex ( l = 1, 2, 3, and 5, depending on the OMS arrangement) laser modes is achieved, featuring high mode purities (>95%) and fast responses (~100 microseconds). The proposed intracavity MEMS-OMS–enabled laser configuration provides an at-source solution for generating high-purity fast-switchable laser modes, with potential applications ranging from advanced optical imaging to optical tweezers, optical machining, and intelligent photonics.