SHEN Yu

Dr. SHEN Yu


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 March 2022 in Optics Letters
Verified
Journal Article
Closed access
PDF file
ZLZe Lv
Ze Lv
SYSHEN Yu
SHEN Yu
NZNan Zong
Nan Zong
QBQi Bian
Qi Bian
EWEr-Peng Wang
Er-Peng Wang
QPQin-Jun Peng
Qin-Jun Peng
A compact and robust all-solid-state mid-infrared (MIR) laser at 6.45 µm with high average output power and near-Gaussian beam quality is demonstrated. A maximum output power of 1.53 W with a pulse width of approximately 42 ns at 10 kHz is achieved using a ZnGeP2 (ZGP) optical parametric oscillator (OPO). This is the highest average power at 6.45 µm of any all-solid-state laser to the best of our knowledge. The average beam quality factor is measured to be M2 = 1.19. Moreover, high output power stability is confirmed, with a power fluctuation of less than 1.35% rms over 2 h, and the laser can run efficiently for more than 500 h in total. Using this 6.45 µm pulse as a radiation source, ablation of animal brain tissue is tested. Furthermore, the collateral damage effect is theoretically analyzed for the first time, to the best of our knowledge, and the results indicate that this MIR laser has excellent ablation ability, making it a potential replacement for free electron lasers.

19 April 2022 in Optics Letters
Verified
Journal Article
Closed access
PDF file
HMHoujie Ma
Houjie Ma
XWXin Wei
Xin Wei
HZHui Zhao
Hui Zhao
MZMinglong Zhang
Minglong Zhang
HZHaiqiong Zhou
Haiqiong Zhou
SDShibo Dai
Shibo Dai
We demonstrate the first nanosecond pulsed single longitudinal mode (SLM) intracavity-pumped diamond Raman laser, to the best of our knowledge. The eye-safe coherent source at 1634 nm, which was converted from the actively Q-switched 1342 nm Nd:YVO4 laser, yielded 4.35 W of multimode average output power with a pulse duration of 6 ns and peak power of 29 kW. By exploiting the spatial hole burning free gain mechanism in the Raman media, stable SLM operation was observed at low output power (0.46 W) for the free-running case. Furthermore, by incorporating an etalon in the fundamental standing-wave cavity, the spectral linewidth of the fundamental field was suppressed substantially below the diamond Raman gain linewidth and slightly less than the free spectral range of the mm-scale Raman resonator. Thereby, a much higher SLM output power of 1.63 W was obtained with a pulse duration of ∼9 ns and a spectral linewidth of ∼77 MHz.

24 May 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NWNing Wen
Ning Wen
SYSHEN Yu
SHEN Yu
YWYa Wen
Ya Wen
EWErpeng Wang
Erpeng Wang
JYJiyong Yao
Jiyong Yao
QPQin-Jun Peng
Qin-Jun Peng
We experimentally demonstrate a stable and compact high pulse energy mid-infrared (MIR) 6.45 μm laser, which is produced by an optical parametric oscillator (OPO) based on the non-oxide BaGa4Se7 (BGSe) nonlinear crystal pumped by 1064 nm Nd:YAG laser oscillator. With optimizing the parameters of the OPO system, a record high idler energy of 6.76 mJ at 6.45 μm was obtained with 18.85 ns of pulse duration (FWHM) at the repetition rate of 10 Hz under 93.5 mJ of pump energy, corresponding to an optical-to-optical conversion efficiency up to 7.23% from 1064 nm to 6.45 μm. The experimental results were in close approximation with the theoretical calculations. To date, it is both the highest MIR pulse energy and the highest conversion efficiency at 6.45 μm for any 1 μm pumped OPOs. Further, excellent output energy stability is demonstrated, with an energy fluctuation of less than ±0.5% over 165 min. Such a laser is interesting for both scientific and medical applications, including, for instance, for trace gas analysis and tissue ablation.

20 May 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YCYuru Cheng
Yuru Cheng
SYSHEN Yu
SHEN Yu
YGYuxia Gao
Yuxia Gao
YWYa Wen
Ya Wen
ZLZe Lv
Ze Lv
QPQin-Jun Peng
Qin-Jun Peng
A theoretical model, based on the classical Pennes’ bioheat theory, incorporating various boundary conditions, was established and compared to analyze the influence of the latent heat of vaporization via simulation. The aim was to elucidate the extent of its influence. The thermal damage rate, governed by the vaporization heat of biological tissue, is introduced as a key factor. Functional relationships between temperature and incident laser power, spatial position, and time are derived from the classical Pennes’ bioheat equation. According to the theoretical model, numerical simulations and experimental validations are conducted using Comsol Multiphysics 6.0, considering the tissue latent heat of vaporization. The model incorporating the latent heat of vaporization proved more suitable for analyzing the interactions between laser and biological tissue, evident from the degree of fit between simulated and experimental data. The minimum deviations between theoretical and experimental observations were determined to be 2.43% and 5.11% in temperature and thermal damage, respectively. Furthermore, this model can be extended to facilitate the theoretical analysis of the impact of vaporization heat from different primary tissue components on laser-tissue interaction.

13 October 2017 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
QBQi Bian
Qi Bian
QZQing-Shuang Zong
Qing-Shuang Zong
JCJin-Quan Chang
Jin-Quan Chang
LFLu Feng
Lu Feng
YBYong Bo
Yong Bo
ZXZu-Yan Xu
Zu-Yan Xu
We demonstrated a compact high-efficiency 100-W-level, narrow-linewidth, quasi-continuous-wave (QCW) diode-side-pumped Nd:YAG laser with a linearly polarized TEM00 mode. Spatial hole-burning elimination and narrow-linewidth laser output were realized by a twisted-mode cavity and an etalon, respectively. The resonator was based on a thermally near-unstable cavity design with dual-rod birefringence compensation convex-convex structure. A 100.4-W linear polarized 1064-nm laser was achieved with a 340-W pump power, corresponding to an optical-to-optical conversion efficiency of 29.5%. The wavelength of the laser was tunable from 1064.22634 to 1064.68071 nm while stably maintaining a beam quality of M 2 = 1.22 and a linewidth of ~240 MHz. The laser was operated at a repetition rate of 500 Hz with 160-μs pulse duration. To the best of our knowledge, this represents the highest average-power and the highest brightness for narrow-linewidth QCW microsecond pulse 1064-nm lasers.

1 June 2023 in Frontiers in Physics
Verified
Journal Article
Open access
JCJin-Quan Chang
Jin-Quan Chang
QBQi Bian
Qi Bian
YBYong Bo
Yong Bo
SYSHEN Yu
SHEN Yu
QPQin-Jun Peng
Qin-Jun Peng
A several-kilowatt level laser at 946 nm is demonstrated in a cryogenically cooled diode-pumped Nd:YAG slab system. The oscillator realizes the record of the output power of 2.85 kW in a compact cavity with the homemade cryogenically cooled Nd:YAG crystal slab. The pulse repetition rate and pulse width of the laser are 400 Hz and 200 µs, respectively, and the center wavelength under full power is 946.2 nm with a bandwidth of about 0.5 nm. The absorption linewidth at 808 nm is a little narrowed and blue shifts at the cryogenic temperature, while the cooling temperature decreases from 300 to 77 K. The measured thermal conductivity increases from 10 to 70 W/mˑK, and the thermal expansion coefficient decreases from 7.5*10−6 to 1.5*10−6/K. These results could guide us in simulating the temperature gradient and thermal-induced stress distributions in the crystal slab.