Black soldier fly larvae (BSFL) have been employed for valorizing organic waste materials as the larvae are able to consume organic waste and transform it into valuable larval biomass. In this study, BSFL were found to potentially reduce blended sewage sludge. The addition of palm kernel expeller (PKE) fortified the protein and lipid content in blended sewage sludge substrates, leading to larval growth enhancement. In addition, the larval weight also influenced the lipid yield and fatty acid methyl ester (FAME) profile. However, the optimum ratio of sewage sludge to PKE had to be determined as excess PKE content could become a threat to larval growth by contributing to the reduction of non-fiber carbohydrates content in the feed, thereby resulting in the decrease in lipid yield and FAME content. In this work, a sewage sludge to PKE ratio of 2:3 proffered the highest larval weight gained at 46.99 ± 2.09 mg/larva. Meanwhile, a proportion of 3:2 of sewage sludge to PKE was able provide the highest lipid yield of 17 ± 1.77%. Furthermore, the FAME profile revealed the presence of a significant amount of saturated and monosaturated fatty acids, indicating a good quality biodiesel. Thus, BSFL-based biodiesel fed with blended sewage sludge and PKE could be utilized for producing a high quality biodiesel. However, further improvement on the amount of lipid yield and FAME content should be further investigated.

In recent years, numerous studies have focused on the use of biochar as a biological material for environmental remediation due to its low-cost precursor (waste), low toxicity, and diversity of active sites, along with their facile tailoring techniques. Due to its versatility, biochar has been employed as an adsorbent, catalyst (for activating hydrogen peroxide, ozone, persulfate), and photocatalyst. This review aims to provide a comprehensive overview and compare the application of biochar in water remediation. First, the biochar active sites with their functions are presented. Secondly, an overview and summary of biochar performance in treating organic pollutants in different systems is depicted. Thereafter, an evaluation on performance, removal mechanism, active sites involvement, tolerance to different pH values, stability, and reusability, and an economic analysis of implementing biochar for organic pollutants decontamination in each application is presented. Finally, potential prospects to overcome the drawbacks of each application are provided.

Anaerobic co-digestion (ACD), where two or more substrates are digested simultaneously, is able to prevent the problems associated with mono-digestion. The aim of this study is to develop a simulation model of ACD of food waste (FW) with sewage sludge (SS) for biogas production coupled with pre-treatment, sludge handling and biogas upgrading using SuperPro Designer v9.0. The Design Expert v13 is employed to perform optimization and evaluate the effect of hydraulic retention time (HRT), sludge recycle ratio, water to feed ratio (kg/kg) and SS to FW ratio (kg/kg) on the methane flow, chemical oxygen demand (COD) and volatile solids (VS). The results show that the methane yield of 0.29 L CH4/g COD removed, COD removal efficiency of 81.5% and VS removal efficiency of 69.2% are obtained with a HRT of 38.8 days, water to feed ratio (kg/kg) of 0.048, sludge recycle ratio of 0.438 and SS to FW ratio (kg/kg) of 0.044. Economic analysis has shown this study is feasible with a payback time of 6.2 years, net present value (NPV) of $5,283,000 and internal return rate (IRR) of 10.2%. This indicates that the ACD of FW and SS is economically feasible in a larger scale.